Toggle Switch
- C & K Components - T203SY9V3GE - Switch, Toggle. DPDT Center-off. On-Off-On, 2A, 120 VAC 0.4VAIN STOCK - MORE THAN 1,000 READY TO SHIP!
C & K Components - T203SY9V3GE Switch, toggle.
T-Series Subminiature Toggle Switch
Contacts: DPDT Center-off.
Contact Ratings: 2A 125VAC/28VDC or 0.4VA low level / dry circuit,
Contact Material: Gold over Silver Contacts.
Actuator: On-Off-On.
Connection: Gold over tinned PC pins, Epoxy sealed.
mount: Vertical Mount, V-Bracket
Mech: PCB, bushing is not threaded.
Body: 0.358" x 0.40" x 1.0" above pc board.
Made in USA
- SAFRAN - EATON - CUTLER-HAMMER AEROSPACE - 8906K5354 - Switch, Toggle. DPDT, 15A, 125VAC.Special Price $24.98 Regular Price $32.50READY TO SHIP - ONLY 27 LEFT IN STOCK!
SAFRAN - EATON - CUTLER-HAMMER AEROSPACE - 8906K5354 Switch, Toggle.
Contacts: DPDT 15Amp 125VAC.
Actuator: On/Off/On (Mom).
Threaded Bushing Length: 0.418".
Actuator Length: 0.690".
Dimensions: 1.34" long x 0.896" wide x 1.002" deep.
Termination: (6) 1/4: Male Quick Connect Terminals.
Note: Environmentally Sealed Shaft.
Learn More - Cutler-Hammer / Eaton - 8130K20J15V51 - 3 Position DPDT On/Off/On Motor Reversing Rocker Switch 6A 125 VACSpecial Price $12.98 Regular Price $18.95IN STOCK - MORE THAN 1,000 READY TO SHIP!
Industrial Cutler-Hammer / Eaton - 8130K20J15V51, DPDT On/Off/On, Center-Off, Motor Reversing Toggle Switch (Already Cross Strapped) Permits usage for Polarity Reversing Motor. Alternate 8951159
White Rocker Identified FWD & REV, 6A-125VAC, 3Amp 250VAC, 2A-277VAC
Six (6) 1/4" Quick Connect Male Tabs, Dimension: 1.45" wide x 1.33" x 1.16"
Panel Mount Fits standard .83 x 1.48 Inch Rectangular opening. Switch secured by included snap-on bezel.
Very handy item to have around the shop if you are DYI type. Used for all sorts of DC motor reversing applications such as camper trailer jacks, winch controls for in/out operation, door open closed, liftgate up/down, boat navigation and anchor or Automotive Motor Control.
This switch can be used when you want to feed (2) loads from 1 or 2 sources. This switch may also be used as a SPDT switch by simply not using 3 of the terminals.
Made with Pride in USA
- Carlingswitch - 2GK53-NBL3 - Model XSC1 - Switch, Toggle with Paddle, DPST 15A 125V, 10Amp 250VAC.IN STOCK - MORE THAN 100 READY TO SHIP!
Carlingswitch - 2GK53-NBL - Model 3XSC1 Switch, Toggle with Paddle.
G Series Toggle Switches Contains a slow-make, slow-break contact mechanism.
Contacts: DPST. Double Pole, On-None-Off
Contact Ratings: 15Amp 125VAC, 10AMP 250VAC, 1/2 HP 125-250 VAC
Actuator: Nylon Bat Handle. Toggle Length - .687", Bushing Length - .465"
Use .250" Tab Terminations
Note: With Hardware.
Alternates: 2GK51-NBL3, 35-3150, AML33FBA4AC01
New Old Stock
Learn More - C & K Components - 7205MY9AGE - Switch, Toggle. DPDT 5A 120VAC.
C & K Components - 7205MY9AGE Switch, Toggle.
Contacts: DPDT.
Contact Ratings: 5Amp 120VAC.
Actuator: (On)-Off-(On).
Connection: PC Right Angle (RA) Trminals.
Mech: PCB. Body: 12.9mm long x 11.4mm wide x 11.0mm high.
Overall with actuator and contacts 31.2mm long.
Note: Center off.
Non-threaded bushing 6.9mm long.
Actuator: 6.9mm long.
Miniature C&K 7205.
Learn More - Miyama Electric - MS-245 - Miniature Switch, Toggle. DPDT 3Amp 125VAC. Series MS-240 -245IN STOCK - MORE THAN 100 READY TO SHIP!
Miyama Electric - MS-245 Miniature Switch, Toggle. Series MS-240 - 245
Contacts: DPDT, MS 245, Double-Pole, ON-ON.
Contact Ratings: 3Amp 125VAC.
Switching Action: Break (OFF), Changeover (On-On)
Connection: Solder.
Max. Contact Resistance: 20 mΩ
Leads: for Soldering
Operating Temperature -10 C to 55°C
Min. Insulation Resistance: 100 MΩ
AC Test Voltage: 1 kV
Mount: Panel.
Body: 0.377" long x 0.321" wide x 0.286" high, plus bushing, contacts and actuator.
Metric Dimensions: Vertical 8.0 X Width 9.0 X Depth 27.5 mm
Note: Threaded Bushing: 0.213" long.
Very Miniature, New Old Stock
Alternate: MS-240.245
Made in Japan
Learn More - Eaton - Cutler-Hammer - AN3023-9 - 8713K14 - Switch, Toggle. DPST 20Amp.
Eaton - Cutler-Hammer - AN3023-9 - 8713K14 Switch, Toggle.
Contacts: DPST.
Contact Ratings: 20Amp.
Actuator: On-Off(Mom).
Normally Closed.
Connection: Screw Terminals.
Mech: Panel with 2 holes 1.85" centers.
Body: Flange 2.123" long x 1.262" wide x 0.046" thick.
Overall 2.123" long x 1.5" wide x 0.953" high plus contacts.
Note: Double marked AN3023-9 and ST55L.
NSN: 5930-00-548-5328
Genuine Vintage Cutler Hammer - New Old Stock
Made in the USA.
Learn More - Cutler-Hammer / Eaton - 7590K6 - Switch, Toggle. Contacts: DPST (2 Position).
Cutler-Hammer / Eaton - 7590K6 - Switch, Toggle.
The 7500 series general purpose Toggle Switch offers the widest selection of features and the design flexibility to meet a variety of applications.
Contacts: DPST (2 Position).
Contact Ratings: 6Amp @ 125VAC, 3Amp @ 250VAC, 2Amp 277VAC.
Elect Config: Off - None - On
Terminatuion: Solder Terminals.
Mech: Panel Mount with Threads.
Body: 1.317" long x 0.753" wide x 1" behind panel, including terminals. (33.3X31.8X14.3mm)
Note: Bushing: 3/8" D x 0.50" long.
Actuator: Bat 0.544" long.
Complete with Hardware.
Approvals: CSA, UL, RoHS Compliant
Genuine Cutler Hammer - New Old Stock
Alternate: Newark 04M4782, Allied 70155741, UPC 786685680514
Applications: Industrial
Learn More - Cutler-Hammer / Eaton - 3-678 - Switch, Toggle. Contacts: DPST 6A 125V.Special Price $4.98 Regular Price $6.95IN STOCK - MORE THAN 100 READY TO SHIP!
Cutler-Hammer / Eaton - 3-678 Switch, toggle.
Contacts: DPST. Contact
Ratings: 6Amp 125VAC / 3Amp 250VAC (2.5 A L 125VAC 2A 277VAC).
Connection: solder terminals.
Mech: Bushing length: 0.462" D x 0.462" long. Body: 1.339" long x 0.75" wide x 1.198" deep including terminals.
Actuator: plastic, black.
Made in USA
Learn More - Cutler-Hammer / Eaton - 7560K53 - Switch, toggle. DPST 15Amp 125VAC.Special Price $4.95 Regular Price $5.95Switch, toggle. Contacts: DPST. Contact Ratings: 15Amp 125VAC 1/2HP (10Amp 250VAC, 3/4HP 250VAC). Connection: screw. Mech: Panel. Body: 1.321" long x 0.747" wide x 0.735" high. Standard 15/32" threaded bushing x 0.478" long (seated 0.664" long). Note: No Bat. Learn More
- C & K Components - M83731/16-311 - Switch, toggle. DPDT 5A 120V.$8.72Switch, toggle. Contacts: DPDT. Contact Ratings: 5Amp 120VAC/2A 250VAC. Actuator: On-Off-(On). Connection: PC RA terminals. Mech: PCB. Body: 12.9mm long x 11.4mm wide x 11.0mm high. Overall with actuator and contacts 31.2mm long. Note: Center off. Non-threaded bushing 6.9mm long. Actuator: 6.9mm long. Miniature C&K 7207 type. Military NSN 5930-014120241. Connection:2-3,5-6 / Open / 2-1,5-4. Learn More
- C & K Components - 7211SY9AV2GE - Switch, toggle. DPDT 5Amp 120VAC.$9.00Switch, toggle. Contacts: DPDT. Contact Ratings: 5Amp 120VAC, 2Amp 250VAC. Actuator: On-On-On. Connection: PC terminals. Mech: PCB or panel, RA leads. Note: Miniature. Learn More
- C & K Components - 7211J2ZLE22 - Switch, toggle/paddle. DPDT.
C & K Components - 7211J2ZLE22 - Switch, Toggle.
Contacts: DPDT.
Contact Ratings: 0.4VA 20V max.
Actuator: Paddle, On-On-On.
Connection: Solder.
Mech: PCB.
Body: Snap in mount frame 24.1mm long x 15.5mm wide.
Miniature.
New Old Stock
Made in the USA.
Learn More - C & K Components - 7201J2ZQE2 - Switch, toggle. DPDT 5A 125V.
C & K Components - 7201J2ZQE2 Switch, Toggle.
Contacts: DPDT.
Contact Ratings: 5Amp 125V.
Actuator: On-On.
Elect config: Gold/Solder Terminals.
Mech: PCB.
Additional Information: https://www.ckswitches.com/products/switches/product-details/Rocker/7000/
Note: Mini flat paddle. Panel Mount Flange Attachment is not included.
Learn More - C & K Components - 7207KC - Switch, Toggle. Contacts: DPDT w/Locking Feature.Special Price $6.98 Regular Price $8.50
C & K Components - 7207KC Switch, toggle.
Contacts: DPDT. Series 7000
Contact Ratings: 120VAC 5Amp (0.4VA).
Actuator: 3 Position, Pull to switch. On-Off-Momentary.
Each side On can be locked into place.
Mech: PCB, 6 pin.
Note: Miniature.
Threaded Bushing length 0.377".
Actuator length: 0.581".
Additional Information: https://www.ckswitches.com/media/1394/7000toggle.pdf
Learn More - C & K Components - 7201SYCGE - Switch, Toggle. PCB or Panel Mount,DPDT 5A 120V.
C & K Components - 7201SYCGE - Switch, Toggle.
Contacts: DPDT.
Contact Ratings: 5Amp 120VAC, 2Amp 250VAC.
Actuator: On-On.
Connection: PC leads.
Mech: PCB.
Panel hole: 0.502" long x 0.453" wide x 0.377" high.
Threaded bushing 0.350" long.
Actuator 0.412" long.
Note: Miniature. Hardware required, not included.
Made in the USA.
Learn More - JBT - ST50M - Switch, toggle. Contacts: DPST, 15A 125VAC, 6.0A 250 VAC.Special Price $24.98 Regular Price $32.50
JBT - ST50M - Switch, Toggle.
Contacts: DPST.
Current: 15A @ 125 VAC
Current: 6.0A @250 VAC
Actuator: Off-On(Mom).
Connection: 4 Screw Terminals.
Mech: Single hole mount/bushing.
Dimensions: Width: 0.75 in, Height: 2.2 in, Length: 1.32 in
Note: Threaded bushing: 0.460" D x 0.460" long.
Actuator length: 0.694" long.
NSN 5930-00-615-5364
Made in the USA.
Learn More - Cutler-Hammer / Eaton - 8372K7 - 8372K107 - Switch, Toggle. DPST 6Amp 125VAC.Special Price $9.98 Regular Price $14.50Out of stock
Cutler-Hammer / Eaton - 8372K7 - 8372K107 - Switch, Toggle.
This line of switches employs a quick-make/quick-break contact mechanism. The resultant high-speed movement eliminates the “teasing” of the switch and reduces the pitting of the contact surfaces due to arcing. Self-cleaning and wiping contact action assures positive contact on switch operation. These switches are especially suited for use in small motor applications.
Contacts: DPST.
Contact Material: Bronze Silver Plated
Contact Mechanism: Quick-make/quick-break wiping action
Contact Ratings: 6Amp 125VAC, 3Amp 250VDC.
Actuator: On-Off.
Mounting means: Threaded bushing—0.468 in (11.89 mm) dia., 32 threads/inch
Keyway—0.068 x 0.035 in (1.73 x.89 mm) deep, provides anti-rotation featureConnection: Screw terminals, no hardware. #5-40 X 5/32"
Mech: Panel, Standard 15/32-32 threaded bushing seated 0.540" long.
Body: 1.156" long, plus contacts x 0.689" wide x 0.592" deep, plus contacts.
Note: P/N: 8372K7 is 8372K107.
NSN 5930-00-283-8804
Listed UL/CSA. RoHS Compliant
Made in the USA.
Learn More - Cutler-Hammer / Eaton - 3-139 - Switch, toggle. Contacts: DPST.Special Price $4.98 Regular Price $6.50
Cutler-Hammer / Eaton - 3-139 Switch, toggle.
Contacts: DPST.
Contact Ratings: 6Amp 125VAC.
Actuator: On/Off.
Connection: Solder Terminals.
Mech: panel, 0.45" threaded bushing.
New Old Stock
Learn More - CUTLER-HAMMER - SF6TCX392 - Switch, toggle. DPST RA.Special Price $1.98 Regular Price $3.00Out of stock
CUTLER-HAMMER - SF6TCX392 Switch, toggle.
Contacts: DPST.
Connection: RA PCB 4 Pin.
Mech: PCB. Body: 0.4" wide x 0.6" deep x 0.25" above pc board - plastic.
Note: Miniature. Red actuator, black body.
Learn More - Cutler-Hammer / Eaton - 3-211 - Switch, toggle. SPDT 6A/125VAC, 3A/250VACSpecial Price $4.98 Regular Price $6.50READY TO SHIP - ONLY 89 LEFT IN STOCK!
Cutler Hammer - Eaton - 3-211 - Toggle Switch.
Contacts: SPDt.
Contact Ratings: 6Amp 125VAC, 3Amp 250VAC.
Actuator: Off-On.
Connection: Solder.
Mech: Panel, standard 3/8" D x 0.339" (8.6mm) long, bushing mount.
Panel hole: 1.161" (29.5mm) long x 0.700" (17.70mm) wide x 0.652" (16.5mm) high, plus contacts.
Note: Flat bat 0.3777" (9.5mm) wide x 0.662" (16.8mm) long.
Learn More - NKK NIHON KAIHEIKI - B22EV - B22EV-AH - Switch, Toggle Subminiature, DPDT On-None-On.
NKK NIHON KAIHEIKI - B22EV - B22EV-AH - Switch, Toggle Subminiature.
Contacts: DPDT.
Contact Ratings: 0.4VA 28V AC/DC.
Material: Polycarbonate
Illumination: On-None-On (Up-Down).
Mech: PCB Mount, Right Angle
Has Gold Plated Leads and Gold Plated Contacts.
Precision made switch with Chrome Plated Bat Handle.
Panel Hole: Body 10.2mm Long x 9.00mm wide x 9.0mm High.
Overall with Leads and Paddle 29.5mm Long.
Vertical with Bracket.
Paddle: Flattened.
Made in Japan
Learn More - Cutler-Hammer / Eaton * - 7591K4 - Switch, toggle. Contacts: DPDT.$12.50Switch, toggle. Contacts: DPDT. Contact Ratings: 6Amp 125VAC/3AMP 250VAC. Actuator: On-Off-On, Bat. Body: 1.318" (33.4mm) long x 0.751" (19.00mm) wide x 0.764" (19.4mm) high plus bushing, lever and terminals.Note: Bushing length: 11.91mm (0.469"). Lever length: 14.30mm (0.563"). Screw terminals. Learn More
- Cutler-Hammer / Eaton * - 7585K4 - Switch, toggle. Contacts: DPST.$10.00Switch, toggle. Contacts: DPST. Contact Ratings: 6Amp 125VAC/3Amp 250VAC/ 2.5Amp 125VAC/2Amp 277VAC. Actuator: 2 Position. Connection: screw terminals. Mech: Panel, one hole. Body: 1.315" long x 0.755" wide x 1.037" below panel, including terminals. Note: Threaded bushing length: 0.357" (9.0mm). Actuator length: 0.573" (14.5mm). Made in the USA. Learn More