Toggle Switch

Honeywell/Micro Switch - 104TL226-5 Switch, Toggle.

4PDT (Mom) On/None/Off.

125VAC 7.5Amp/250VAC 6Amp.

Resistive DC: 125V 0.75Amp/250V 0.5Amp/28VDC 7.5Amp.

Inductive load: 125VAC 7.5Amp/28VDC 7.5Amp.

Termination IWTS (16-20AWG) MIL-S-3950.

Threaded bushing length: 0.432".

Actuator length: 0.643".

Operating temperature: -85 to 160 Deg F.

Terminals accept pins M39029/1-101, not included.

Note: Military. Environmentally sealed shaft.

Learn More

Honeywell - Micro Switch - 104TL1-72 -Switch, Toggle / Rocker

Contacts: 4PDT.

Contact Ratings: 0.75 A at 115 Vdc,0.5 A at 250 Vdc,0.5 A to 20 A at 0.5 Vdc to 28 Vdc,0.5 A to 15 A at 0.5 Vac to 277 Vac.

Actuator: (On) On (On) = (Mom) On (Mom).

Mech: Bushing 15/32 in.

Operating temperature: -85degF to +160degF.

Note: Environmentally sealed switch, completely sealed switching chamber, high strength, temperature resistant, non-tracking case, material and silver cadmium oxide contacts.

Military qualified MS27724-3.

Contacts: IWTS (14-16AWG) termination.

Double listed as MS27724-3 SKU 133204

Learn More

Carlingswitch - 2GK53-NBL - Model 3XSC1 Switch, Toggle with Paddle.

G Series Toggle Switches Contains a slow-make, slow-break contact mechanism.

Contacts: DPST. Double Pole,  On-None-Off

Contact Ratings: 15Amp 125VAC, 10AMP 250VAC, 1/2 HP 125-250 VAC

Actuator: Nylon Bat Handle. Toggle Length - .687", Bushing Length - .465" 

Use .250" Tab Terminations

Note: With Hardware.

Alternates: 2GK51-NBL3, 35-3150, AML33FBA4AC01

New Old Stock

Learn More

C & K Components - 7401T1ZQE Switch, Toggle.

Contacts: 4PDT.

Contact Ratings: 5Amp.

Actuator: On/On.

Connection: Solder Terminals.

Mech: Panel Mount 0.5" D.

Note: Miniature.

Silver Plated Contacts.

Epoxy sealed. SS case.

Learn More

Eaton - Cutler-Hammer - AN3023-9 - 8713K14 Switch, Toggle.

Contacts: DPST.

Contact Ratings: 20Amp.

Actuator: On-Off(Mom).

Normally Closed.

Connection: Screw Terminals.

Mech: Panel with 2 holes 1.85" centers.

Body: Flange 2.123" long x 1.262" wide x 0.046" thick.

Overall 2.123" long x 1.5" wide x 0.953" high plus contacts.

Note: Double marked AN3023-9 and ST55L.

NSN: 5930-00-548-5328

Genuine Vintage Cutler Hammer - New Old Stock

Made in the USA.

Learn More

Cutler-Hammer / Eaton - 7590K6 - Switch, Toggle.

The 7500 series general purpose Toggle Switch offers the widest selection of features and the design flexibility to meet a variety of applications.

Contacts: DPST (2 Position).

Contact Ratings: 6Amp @ 125VAC, 3Amp @ 250VAC, 2Amp 277VAC.

Elect Config: Off - None - On

Terminatuion: Solder Terminals.

Mech: Panel Mount with Threads.

Body: 1.317" long x 0.753" wide x 1" behind panel, including terminals. (33.3X31.8X14.3mm)

Note: Bushing: 3/8" D x 0.50" long.

Actuator: Bat 0.544" long.

Complete with Hardware.

Approvals: CSA, UL, RoHS Compliant

Genuine Cutler Hammer - New Old Stock

Alternate: Newark 04M4782, Allied 70155741, UPC 786685680514

Applications: Industrial

Learn More

Cutler-Hammer / Eaton  - 3-678 Switch, toggle.

Contacts: DPST. Contact

Ratings: 6Amp 125VAC / 3Amp 250VAC (2.5 A L 125VAC 2A 277VAC).

Connection: solder terminals.

Mech: Bushing length: 0.462" D x 0.462" long. Body: 1.339" long x 0.75" wide x 1.198" deep including terminals.

Actuator: plastic, black.

Made in USA

Learn More

Switch, toggle. Contacts: DPST. Contact Ratings: 15Amp 125VAC 1/2HP (10Amp 250VAC, 3/4HP 250VAC). Connection: screw. Mech: Panel. Body: 1.321" long x 0.747" wide x 0.735" high. Standard 15/32" threaded bushing x 0.478" long (seated 0.664" long). Note: No Bat. Learn More

JBT - ST50M - Switch, Toggle.

Contacts: DPST.

Current: 15A @ 125 VAC

Current: 6.0A @250 VAC

Actuator: Off-On(Mom).

Connection: 4 Screw Terminals.

Mech: Single hole mount/bushing.

Dimensions: Width: 0.75 in, Height: 2.2 in, Length: 1.32 in

Note: Threaded bushing: 0.460" D x 0.460" long.

Actuator length: 0.694" long.

NSN 5930-00-615-5364

Made in the USA.

Learn More

Cutler-Hammer / Eaton - 8372K7 - 8372K107 - Switch, Toggle.

This line of switches employs a quick-make/quick-break contact mechanism. The resultant high-speed movement eliminates the “teasing” of the switch and reduces the pitting of the contact surfaces due to arcing. Self-cleaning and wiping contact action assures positive contact on switch operation. These switches are especially suited for use in small motor applications.

Contacts: DPST.

Contact Material: Bronze Silver Plated

Contact Mechanism: Quick-make/quick-break wiping action

Contact Ratings: 6Amp 125VAC, 3Amp 250VDC.

Actuator: On-Off.

Mounting means: Threaded bushing—0.468 in (11.89 mm) dia., 32 threads/inch
Keyway—0.068 x 0.035 in (1.73 x.89 mm) deep, provides anti-rotation feature

Connection: Screw terminals, no hardware. #5-40 X 5/32"

Mech: Panel, Standard 15/32-32 threaded bushing seated 0.540" long.

Body: 1.156" long, plus contacts x 0.689" wide x 0.592" deep, plus contacts.

Note: P/N: 8372K7 is 8372K107.

NSN 5930-00-283-8804

Listed UL/CSA. RoHS Compliant

Made in the USA.

Learn More

Cutler-Hammer / Eaton - 3-139 Switch, toggle.

Contacts: DPST.

Contact Ratings: 6Amp 125VAC.

Actuator: On/Off.

Connection: Solder Terminals.

Mech: panel, 0.45" threaded bushing.

New Old Stock

Learn More

CUTLER-HAMMER - SF6TCX392 Switch, toggle.

Contacts: DPST.

Connection: RA PCB 4 Pin.

Mech: PCB. Body: 0.4" wide x 0.6" deep x 0.25" above pc board - plastic.

Note: Miniature. Red actuator, black body.

Learn More

Cutler Hammer - Eaton - 3-211 - Toggle Switch.

Contacts: SPDt.

Contact Ratings: 6Amp 125VAC, 3Amp 250VAC.

Actuator: Off-On.

Connection: Solder.

Mech: Panel, standard 3/8" D x 0.339" (8.6mm) long, bushing mount.

Panel hole: 1.161" (29.5mm) long x 0.700" (17.70mm) wide x 0.652" (16.5mm) high, plus contacts.

Note: Flat bat 0.3777" (9.5mm) wide x 0.662" (16.8mm) long.

Learn More

Switch, toggle. Contacts: DPST. Contact Ratings: 6Amp 125VAC/3Amp 250VAC/ 2.5Amp 125VAC/2Amp 277VAC. Actuator: 2 Position. Connection: screw terminals. Mech: Panel, one hole. Body: 1.315" long x 0.755" wide x 1.037" below panel, including terminals. Note: Threaded bushing length: 0.357" (9.0mm). Actuator length: 0.573" (14.5mm). Made in the USA. Learn More

EATON - CUTLER-HAMMER - 7590K9 - Switch, Toggle.

Contacts: DPST.

Contact Ratings: 6Amp 125VAC/3Amp 250VAC.

Actuator: On-Off-On.

Connection: Male 1/4" spade terminals.

Mech: Panel, one hole.

Body: 1.324" long x 0.750" wide x 1.157" behind panel including terminals.

Note: Threaded bushing length: 0.377".

Actuator length: 0.564".

UL listed, CSA approved.

NSN: 5930007107659

Proudly Made in USA

Learn More

Switch, toggle. Contacts: DPST. Contact Ratings: 6Amp 125V AC/DC, 3Amp 250VDC. Actuator: On - Off. Connection: 4 wire leads, 18AWG, 6" long. Mech: Panel mount. Bushing: 3/8" x 0.480" long. Body: 1.156" long x 0.937" x 0.687". Note: Listed: UL/CSA. Learn More

Cutler-Hammer / Eaton * - 8373K8 - Switch, Toggle.

DPST 6Amp @ 125VAC, 3Amp @ 250VDC.

Threaded bushing: 3/8" x 0.355".

Actuator: 0.50".

Dimensions: Overall 1.153" long x 0.687" wide.

Termination: 6 Solder Terminals.

Genuine Cutler Hammer - New Old Stock

Military NSN 5930-00-259-8341.

Learn More

Switch, toggle. Contacts: 4PDT. Contact Ratings: 15A 115VAC (20Amp Resistive) 400Hz. Actuator: On-On. Connection: 12 solder contacts. Mech: Panel. Body: 1.442" (36.6mm) long x 1.332" (33.8mm) wide x 0.977" (24.8mm) high, plus contacts. Note: Threaded bushing: standard 3/8" D x 11.7mm long. Actuator: 17.1mm long. Complete with hardware. Alt P/N: MS25068-23. Learn More

SAFRAN EATON CUTLER-HAMMER - 8512K15 - Switch, toggle.

Contacts: 4PDT.

Contact Ratings: 15Amp 115VAC.

Actuator: On-On-On.

Connection: Flush terminal screws.

Mech: Panel, bushing 15/32".

Body: 41.8mm long x 33.5mm wide x 32.0mm deep behind panel.

Note: Environmentally sealed switch (watertight). 20,000 Operations at rated load.

Threaded bushing length: 12.1mm.

Actuator length:17.3mm.

Complete with hardware.

New Old Stock- Made in USA

Learn More

Switch, toggle. Contacts: 4PDT. Contact Ratings: 5Amp 120VAC or 28VDC (0.4VA 20V AC/DC). Actuator: On-None-On. Connection: PC terminals. Mech: PCB, vertical. Panel hole: 0.845" long x 0.500" wide. Note: Miniature. Non-threaded bushing. Learn More

C & K Components - 7411SHZBE Switch, toggle.

Contacts: 4P.

Contact Ratings: 5Amp 120VAC or 28VDC (0.4VA 20V AC/DC).

Actuator: On-On-On.

Connection: Solder.

Mech: PCB, vertical.

Panel hole: 0.845" long x 0.500" wide.

Note: Miniature. Threaded bushing.

Complete with hardware.

Learn More

JBT - ST50L -  Switch, Toggle.

Contacts: DPST Normally Closed (NC).

Current: 15A @ 125 VAC

Current: 6.0A @250 VAC

Number of Positions: 3 

Actuator: On - None - (Off), Momentary - Off.

Connection: Screw Terminals.

Mech: Standard 15/32" Threaded Bushing.

Dimensions: Width: 0.75 in, Height: 2.2 in, Length: 1.32 in

Alternate: 5225S

Made in USA

Learn More

Safran - Cutler-Hammer - Eaton - 8867K5 Switch, toggle.

DPST On/Center -off.

Threaded bushing: 1/4" D x 0.144" long.

Actuator: 0.445" long.

Dimensions: 0.530" x 0.544", square.

Termination: 4 solder terminals.

Note: Miniature. Complete with hardware.

NSN: 5930-00-889-8602

Made in USA

Learn More

Safran Eaton CUTLER-HAMMER - 8511K7 - Switch, toggle.

DPST, Off/ON(Mom).

Threaded bushing length: 0.461".

Lever length: 0.681".

Environmentally sealed.

One hole mount.

Dimensions: 1.324" long x 0.891" wide x 1.224" high.

Contacts: 4 screw terminals.

Complete with hardware kit.

 

Learn More