Toggle Switch

HONEYWELL MICRO SWITCH - 11TS1-21 Switch, Toggle, SPST.

MICRO SWITCH TS Series toggles may be used anywhere manual operation is desired. They are an entry-level solution for applications that do not require a sealed toggle switch.

Hermetic and environmentally sealed toggle switches offer enhanced reliability with MICRO SWITCH™ technology. Can be used in a variety of applications where a panel-mount switch with an environment-proof rating is needed, including industrial equipment, military and commercial aviation, agriculture, process control, and medical.

Type: Stainless Steel. Phenolic Toggle

Contacts: SPST, 2 Position Maintained, Silver Cadmium Oxide

Contact Ratings: 15Amp 125, 250, 277VAC (1/2HP 125V, 1HP 250, 277V, 5A 125VAC).

Actuator: Off-On. Maintain/Maintain

Connection: Screw Terminals.

Mech: Panel, Bushing. Lever-to-Bushing Seal

Body: 1.131" (28.7mm) Long x 0.638" (16.2mm) Wide x 0.694" (17.6mm) High.

Threaded Bushing: 1/2" D x 12.3mm long.

Actuator: 17.2mm Long.

Operating Temp.: -54C to 71C (-65F to 160F)

Complete with Hardware.

Listed: UL, CSA, CE

Made in USA

NSN: 5930-00-655-1514

Alternates: 00-00370-08, 0232-5, 09N051N, 11TS1-1, 12521, 144422, 146-007-0001  , 16-02262, 1942198-3, 1942198-3, 21C1596-41, 270-900011-001, 270-900011-011, 3200708-1, 320AS116-8, 34861033, 35058EM, 400004-16, 4101, 4101JT, 411036-21, 511TS1-7, 51590, 567584, 59027-105, 689-209, 7002B53, 7502K12, 7502K13, 7581K4, 7581K5, 7581K6, 7581K7, 7768942PTS, 7800-0042-001, 812031-0021, 82602, 82650, 83004, 86202, 8800K13, 8800K13, 8800K13, 8800K16, 8800K7, 8802K10, 8802K6, 90-333, 9N51N, AN3021-1, CH8800K16, CH8802K10, D72205WG, F611, INR122-123, JAMST42E, L42E, MIL-DTL-83731, MIL-S-83731, MS35058, MS35058-1, MS35058-16, MS35058-21, Q70994-20, RS62, S382-1, SA13, ST40E, ST42E

Learn More

MARQUARDT GMbH - 1821 1101 Switch, Toggle with 343.001.023 Weatherproof Boot.

Marquardt 1820 series toggle switches are suitable for use in Class II appliances. A black Neoprene® lever cover which simply screws onto the toggle switch M12x0.75mm bush is available to protect the actuator from dust and water ingression.

Contacts: SPST ON/OFF.

Contact Ratings: 6Amp 125/250VAC.

Connection: Two 3/16" Male Quick Connect Terminals, or maybe soldered.

Mech: Panel, Snap-in.

Body: ThermoPlastic Glass Fiber Reinforced

Color: Black.

Overall 0.943" Long x 0.648" wide.

Behind Panel 0.808" Long x 0.476" wide.

Note: With Weatherproof Neoprene® Boot.

Threaded Bushing Length: 0.308".

Operating Temperature: -20 C to 55 C

Life Cycles: 50,000

Actuator Length: 0.542".

Rohs Compliant

Alternate: Mouser  979-1934-3114 Switch 

MARQUARDT GMbH - 1821 1101 Switch, Toggle with 343.001.023 Weatherproof Boot.

Marquardt 1820 series toggle switches are suitable for use in Class II appliances. A black Neoprene® lever cover which simply screws onto the toggle switch M12x0.75mm bush is available to protect the actuator from dust and water ingression.

Contacts: SPST ON/OFF.

Contact Ratings: 6Amp 125/250VAC.

Connection: Two 3/16" Male Quick Connect Terminals, or maybe soldered.

Mech: Panel, Snap-in.

Body: ThermoPlastic Glass Fiber Reinforced

Color: Black.

Overall 0.943" Long x 0.648" wide.

Behind Panel 0.808" Long x 0.476" wide.

Note: With Weatherproof Neoprene® Boot.

Threaded Bushing Length: 0.308".

Operating Temperature: -20 C to 55 C

Life Cycles: 50,000

Actuator Length: 0.542".

Rohs Compliant

Alternate: Mouser  979-1934-3114 Switch 343.001.023 Boot

Approvals: UL; CSA; ENEC

Made in Germany

Approvals: UL; CSA; ENEC

Made in Germany

Learn More

CP CLARE - 5930-538-3614 - B81622 - Switch, Lever.

Contacts: SPST.

Contact Ratings: 1A precious metal contacts.

Actuator: center-on, circuit closed.

Connection: solder terminals.

Mech: 0.95" x 2.25" black plate, 2 holes 1.95" spacing.

Panel hole: extends 3" behind panel.

Weight: 0.5 lb.

Alt P/N B81622

Learn More

Carlingswitch - 2GK53-NBL - Model 3XSC1 Switch, Toggle with Paddle.

G Series Toggle Switches Contains a slow-make, slow-break contact mechanism.

Contacts: DPST. Double Pole,  On-None-Off

Contact Ratings: 15Amp 125VAC, 10AMP 250VAC, 1/2 HP 125-250 VAC

Actuator: Nylon Bat Handle. Toggle Length - .687", Bushing Length - .465" 

Use .250" Tab Terminations

Note: With Hardware.

Alternates: 2GK51-NBL3, 35-3150, AML33FBA4AC01

New Old Stock

Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 15A/125VAC 0.5HP, 10 Amp 250VAc. Actuator: On-None-Off. Connection: solder terminals. Mech: PCB, bushing is threaded. Body: 1.121" wide x 0.631" deep x 0.619" high. More info: page 154 http://www.eaton.com/ecm/groups/public/@pub/@electrical/documents/content/pg07002001e.pdf Learn More

Eaton - Cutler-Hammer - AN3023-9 - 8713K14 Switch, Toggle.

Contacts: DPST.

Contact Ratings: 20Amp.

Actuator: On-Off(Mom).

Normally Closed.

Connection: Screw Terminals.

Mech: Panel with 2 holes 1.85" centers.

Body: Flange 2.123" long x 1.262" wide x 0.046" thick.

Overall 2.123" long x 1.5" wide x 0.953" high plus contacts.

Note: Double marked AN3023-9 and ST55L.

NSN: 5930-00-548-5328

Genuine Vintage Cutler Hammer - New Old Stock

Made in the USA.

Learn More

Cutler-Hammer / Eaton - 7590K6 - Switch, Toggle.

The 7500 series general purpose Toggle Switch offers the widest selection of features and the design flexibility to meet a variety of applications.

Contacts: DPST (2 Position).

Contact Ratings: 6Amp @ 125VAC, 3Amp @ 250VAC, 2Amp 277VAC.

Elect Config: Off - None - On

Terminatuion: Solder Terminals.

Mech: Panel Mount with Threads.

Body: 1.317" long x 0.753" wide x 1" behind panel, including terminals. (33.3X31.8X14.3mm)

Note: Bushing: 3/8" D x 0.50" long.

Actuator: Bat 0.544" long.

Complete with Hardware.

Approvals: CSA, UL, RoHS Compliant

Genuine Cutler Hammer - New Old Stock

Alternate: Newark 04M4782, Allied 70155741, UPC 786685680514

Applications: Industrial

Learn More

Cutler-Hammer / Eaton  - 3-678 Switch, toggle.

Contacts: DPST. Contact

Ratings: 6Amp 125VAC / 3Amp 250VAC (2.5 A L 125VAC 2A 277VAC).

Connection: solder terminals.

Mech: Bushing length: 0.462" D x 0.462" long. Body: 1.339" long x 0.75" wide x 1.198" deep including terminals.

Actuator: plastic, black.

Made in USA

Learn More

Switch, toggle. Contacts: DPST. Contact Ratings: 15Amp 125VAC 1/2HP (10Amp 250VAC, 3/4HP 250VAC). Connection: screw. Mech: Panel. Body: 1.321" long x 0.747" wide x 0.735" high. Standard 15/32" threaded bushing x 0.478" long (seated 0.664" long). Note: No Bat. Learn More

JBT - ST50M - Switch, Toggle.

Contacts: DPST.

Current: 15A @ 125 VAC

Current: 6.0A @250 VAC

Actuator: Off-On(Mom).

Connection: 4 Screw Terminals.

Mech: Single hole mount/bushing.

Dimensions: Width: 0.75 in, Height: 2.2 in, Length: 1.32 in

Note: Threaded bushing: 0.460" D x 0.460" long.

Actuator length: 0.694" long.

NSN 5930-00-615-5364

Made in the USA.

Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 15Amp 125VAC/10Amp 250VAC (3/4HP 250VAC). Actuator: On-Off. Connection: Male 1/4" quick connect terminals. Mech: Panel, one hole. Note: Threaded bushing length: 0.512". Actuator length: 0.555". Learn More

Cutler-Hammer / Eaton - 8372K7 - 8372K107 - Switch, Toggle.

This line of switches employs a quick-make/quick-break contact mechanism. The resultant high-speed movement eliminates the “teasing” of the switch and reduces the pitting of the contact surfaces due to arcing. Self-cleaning and wiping contact action assures positive contact on switch operation. These switches are especially suited for use in small motor applications.

Contacts: DPST.

Contact Material: Bronze Silver Plated

Contact Mechanism: Quick-make/quick-break wiping action

Contact Ratings: 6Amp 125VAC, 3Amp 250VDC.

Actuator: On-Off.

Mounting means: Threaded bushing—0.468 in (11.89 mm) dia., 32 threads/inch
Keyway—0.068 x 0.035 in (1.73 x.89 mm) deep, provides anti-rotation feature

Connection: Screw terminals, no hardware. #5-40 X 5/32"

Mech: Panel, Standard 15/32-32 threaded bushing seated 0.540" long.

Body: 1.156" long, plus contacts x 0.689" wide x 0.592" deep, plus contacts.

Note: P/N: 8372K7 is 8372K107.

NSN 5930-00-283-8804

Listed UL/CSA. RoHS Compliant

Made in the USA.

Learn More

Cutler-Hammer / Eaton - 3-139 Switch, toggle.

Contacts: DPST.

Contact Ratings: 6Amp 125VAC.

Actuator: On/Off.

Connection: Solder Terminals.

Mech: panel, 0.45" threaded bushing.

New Old Stock

Learn More

CUTLER-HAMMER - SF6TCX392 Switch, toggle.

Contacts: DPST.

Connection: RA PCB 4 Pin.

Mech: PCB. Body: 0.4" wide x 0.6" deep x 0.25" above pc board - plastic.

Note: Miniature. Red actuator, black body.

Learn More

Cutler Hammer - Eaton - 3-211 - Toggle Switch.

Contacts: SPDt.

Contact Ratings: 6Amp 125VAC, 3Amp 250VAC.

Actuator: Off-On.

Connection: Solder.

Mech: Panel, standard 3/8" D x 0.339" (8.6mm) long, bushing mount.

Panel hole: 1.161" (29.5mm) long x 0.700" (17.70mm) wide x 0.652" (16.5mm) high, plus contacts.

Note: Flat bat 0.3777" (9.5mm) wide x 0.662" (16.8mm) long.

Learn More

CALTERM - 41040 - Switch, Toggle /Paddle.

SPST 20A 12V, On/Off.

Kit of Four Switches for RV's and vans.

Toggle Color: Black.

Connections: Quick Connect

Mounting Bracket

Automotive

Made in England

Learn More

EAGLE - 9-734 - Switch,Toggle.

Contacts: SPST.

Contact Ratings: 15Amp 120VAC.

Actuator: On-Off.

Mech: For wall mount electrical box.

Note: Light Switch.

Wire: 12 - 14 AWG 

Made in the USA.

Note: Brown and ivory mixed.

Package of 3.

Used / Removed from Equipment

UL Listed

Learn More

Switch, toggle. Contacts: DPST. Contact Ratings: 6Amp 125VAC/3Amp 250VAC/ 2.5Amp 125VAC/2Amp 277VAC. Actuator: 2 Position. Connection: screw terminals. Mech: Panel, one hole. Body: 1.315" long x 0.755" wide x 1.037" below panel, including terminals. Note: Threaded bushing length: 0.357" (9.0mm). Actuator length: 0.573" (14.5mm). Made in the USA. Learn More

EATON - CUTLER-HAMMER - 7590K9 - Switch, Toggle.

Contacts: DPST.

Contact Ratings: 6Amp 125VAC/3Amp 250VAC.

Actuator: On-Off-On.

Connection: Male 1/4" spade terminals.

Mech: Panel, one hole.

Body: 1.324" long x 0.750" wide x 1.157" behind panel including terminals.

Note: Threaded bushing length: 0.377".

Actuator length: 0.564".

UL listed, CSA approved.

NSN: 5930007107659

Proudly Made in USA

Learn More

Switch, lever. Contacts: SPST. Contact Ratings: 10Amp 125VAC/5Amp 250VAC (1/4HP 125-250V). Actuator: momentary. Mech: Panel. Note: Spring-loaded locking lever switch, heavy duty. Made in the USA. Learn More

Switch, toggle. Contacts: DPST. Contact Ratings: 6Amp 125V AC/DC, 3Amp 250VDC. Actuator: On - Off. Connection: 4 wire leads, 18AWG, 6" long. Mech: Panel mount. Bushing: 3/8" x 0.480" long. Body: 1.156" long x 0.937" x 0.687". Note: Listed: UL/CSA. Learn More

Cutler-Hammer / Eaton * - 8373K8 - Switch, Toggle.

DPST 6Amp @ 125VAC, 3Amp @ 250VDC.

Threaded bushing: 3/8" x 0.355".

Actuator: 0.50".

Dimensions: Overall 1.153" long x 0.687" wide.

Termination: 6 Solder Terminals.

Genuine Cutler Hammer - New Old Stock

Military NSN 5930-00-259-8341.

Learn More

Cutler-Hammer / Eaton - MS25125-9 Switch, Toggle.

Contacts: SPST.

Actuator: ON-OFF.

Connection: 2 screw terminals.

Mech: 3/8" threaded bushing.

Note: Double marked 8857K21.

Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 7Amp 115VAC. Actuator: On-(Off). Connection: Solder terminals. Mech: Panel, bushing. Body: 28.8mm long x 16.1mm wide x 22.6mm deep behind panel. Note: Threaded bushing length: 13.0mm. Actuator length:17.4mm. Double marked:ST42B. Complete with hardware. Learn More