Toggle Switch
- C & K Components - T203SY9V3GE - Switch, Toggle. DPDT Center-off. On-Off-On, 2A, 120 VAC 0.4VAIN STOCK - MORE THAN 1,000 READY TO SHIP!
C & K Components - T203SY9V3GE Switch, toggle.
T-Series Subminiature Toggle Switch
Contacts: DPDT Center-off.
Contact Ratings: 2A 125VAC/28VDC or 0.4VA low level / dry circuit,
Contact Material: Gold over Silver Contacts.
Actuator: On-Off-On.
Connection: Gold over tinned PC pins, Epoxy sealed.
mount: Vertical Mount, V-Bracket
Mech: PCB, bushing is not threaded.
Body: 0.358" x 0.40" x 1.0" above pc board.
Made in USA
- SAFRAN - EATON - CUTLER-HAMMER AEROSPACE - 8906K5354 - Switch, Toggle. DPDT, 15A, 125VAC.Special Price $24.98 Regular Price $32.50READY TO SHIP - ONLY 27 LEFT IN STOCK!
SAFRAN - EATON - CUTLER-HAMMER AEROSPACE - 8906K5354 Switch, Toggle.
Contacts: DPDT 15Amp 125VAC.
Actuator: On/Off/On (Mom).
Threaded Bushing Length: 0.418".
Actuator Length: 0.690".
Dimensions: 1.34" long x 0.896" wide x 1.002" deep.
Termination: (6) 1/4: Male Quick Connect Terminals.
Note: Environmentally Sealed Shaft.
Learn More - Cutler-Hammer / Eaton - 8130K20J15V51 - 3 Position DPDT On/Off/On Motor Reversing Rocker Switch 6A 125 VACSpecial Price $9.98 Regular Price $18.95IN STOCK - MORE THAN 1,000 READY TO SHIP!
Industrial Cutler-Hammer / Eaton - 8130K20J15V51, DPDT On/Off/On, Center-Off, Motor Reversing Toggle Switch (Already Cross Strapped) Permits usage for Polarity Reversing Motor. Alternate 8951159
White Rocker Identified FWD & REV, 6A-125VAC, 3Amp 250VAC, 2A-277VAC
Six (6) 1/4" Quick Connect Male Tabs, Dimension: 1.45" wide x 1.33" x 1.16"
Panel Mount Fits standard .83 x 1.48 Inch Rectangular opening. Switch secured by included snap-on bezel.
Very handy item to have around the shop if you are DYI type. Used for all sorts of DC motor reversing applications such as camper trailer jacks, winch controls for in/out operation, door open closed, liftgate up/down, boat navigation and anchor or Automotive Motor Control.
This switch can be used when you want to feed (2) loads from 1 or 2 sources. This switch may also be used as a SPDT switch by simply not using 3 of the terminals.
Made with Pride in USA
- Carlingswitch - 2GK53-NBL3 - Model XSC1 - Switch, Toggle with Paddle, DPST 15A 125V, 10Amp 250VAC.IN STOCK - MORE THAN 100 READY TO SHIP!
Carlingswitch - 2GK53-NBL - Model 3XSC1 Switch, Toggle with Paddle.
G Series Toggle Switches Contains a slow-make, slow-break contact mechanism.
Contacts: DPST. Double Pole, On-None-Off
Contact Ratings: 15Amp 125VAC, 10AMP 250VAC, 1/2 HP 125-250 VAC
Actuator: Nylon Bat Handle. Toggle Length - .687", Bushing Length - .465"
Use .250" Tab Terminations
Note: With Hardware.
Alternates: 2GK51-NBL3, 35-3150, AML33FBA4AC01
New Old Stock
Learn More - Cutler-Hammer / Eaton - 7560K53 - Switch, toggle. DPST 15Amp 125VAC.Special Price $4.95 Regular Price $5.95Switch, toggle. Contacts: DPST. Contact Ratings: 15Amp 125VAC 1/2HP (10Amp 250VAC, 3/4HP 250VAC). Connection: screw. Mech: Panel. Body: 1.321" long x 0.747" wide x 0.735" high. Standard 15/32" threaded bushing x 0.478" long (seated 0.664" long). Note: No Bat. Learn More
- C & K Components - 7201J2ZQE2 - Switch, toggle. DPDT 5A 125V.
C & K Components - 7201J2ZQE2 Switch, Toggle.
Contacts: DPDT.
Contact Ratings: 5Amp 125V.
Actuator: On-On.
Elect config: Gold/Solder Terminals.
Mech: PCB.
Additional Information: https://www.ckswitches.com/products/switches/product-details/Rocker/7000/
Note: Mini flat paddle. Panel Mount Flange Attachment is not included.
Learn More - Cutler-Hammer Eaton - 8906K4920 - Switch, Toggle. Lever Lock, SPDT Center-Off Pull-to-Switch Momentary.Special Price $24.98 Regular Price $38.95Cutler-Hammer Eaton - 8906K4920 - Switch, Toggle. Environmental Sealed, Resistant to Dust, Dirt, Spray Extreme Temperatures Contacts: SPDT. Contact Ratings: 15A @ 125VAC, 15A @28VDC. Actuator: Center-Off. Pull-to-Switch. Momentary Both Sides. Requires 0.47" diameter hole to mount, 15-32 Bushing 32 Thread Connection: Screw Terminals with screws, black dress nut, washer, nut and locating ring. Mech: Panel Mount. Thermoset molding materials meet flame retardant requirements Temperature Range: -85°F to +160°F (-65°C to +71°C) Life: 20,000 operations at rated load 40,000 operations mechanical life Note: Must Pull-to-switch either side. Applications: Aircraft-instrument, military-purpose style. Lever lock with lever seal. Made in USA - Mil Grade Lever Lock toggle switch Learn More
- Eaton - Cutler Hammer - SF21SCW191 - Switch, toggle. SPDT 5A 125VAC. Miniature.Special Price $8.98 Regular Price $12.50
Eaton - Cutler Hammer - SF21SCW191 Switch, toggle.
Contacts: Miniature SPDT.
Contact Ratings: 125VAC 5Amp.
Actuator: On-On.
Connection: solder terminals.
Mech: PCB or Panel with threaded bushing.
Bushing length: 0.311".
Actuator length: 0.414".
Complete with hardware.
NSN: 5930-00-270-1674
Learn More - Cutler-Hammer / Eaton - 7560K6 - Switch, toggle. DPST 15Amp 125V.Special Price $7.50 Regular Price $8.99Switch, toggle. Contacts: DPST. Contact Ratings: 15Amp 125VAC 1/2HP (10Amp 250VAC, 3/4HP 250VAC). Connection: screw. Mech: panel. Body: 1.321" long x 0.745" wide x 0.738" high. Standard 15/32" threaded bushing x 0.351" long. Learn More
- CUTLER-HAMMER - SF2GBX191 - Switch, toggle. DPDT 5A 125V. Center-off.$19.00Switch, toggle. Contacts: DPDT. Contact Ratings: 5Amp 125VAC. Actuator: Center-off. Connection: solder. Mech: Panel. Body: 13.0mm long x 12.0mm wide x 13.6mm high plus contacts. Threaded bushing 12.0mm long. Actuator 12.0mm long . Note: Complete with hardware. Learn More
- CUTLER-HAMMER - MS35059-25 - Switch, toggle. DPDT MOM.(N.C.) 15Amp 125VAC.Special Price $27.95 Regular Price $34.99Switch, toggle. Contacts: DPDT MOM.(N.C.). Contact Ratings: 15Amp 125VAC. Actuator: On-(Off). Connection: screw terminals. Mech: Panel, bushing. Panel hole: 1.34" long x 0.78" wide x 0.738" deep, plus terminals.. Note: Standard 3/8" D bushing x 0.467" long (0.647" long seated). Actuator extends 0.705". Up position MOM. Double marked 8828K25. Learn More
- Cutler-Hammer / Eaton * - 8810K10 - Switch, toggle. SPST MON.(N.O.) 5Amp 125VAC.$14.50Switch, toggle. Contacts: SPST.MOMENTARY (N.O.) Contact Ratings: 5Amp 125VAC. Actuator: Off-(On). Connection: screw terminals. Mech: Panel, bushing. Panel hole: 1.143" long x 0.633" wide x 0.62" deep, plus terminals. Note: Standard 3/8" D bushing x 0.387" long (seated). Actuator extends 0.664". Learn More
- Eaton - Cutler Hammer - 8376K1 - Switch, toggle. DPST 5Amp 125VAC.Special Price $12.98 Regular Price $15.00
Eaton - Cutler Hammer - 8376K1 Switch, toggle.
Contacts: DPST.
Contact Ratings: 5Amp 125VAC.
Connection: Solder.
Inclosure: Fully Inclosed
Mech: Panel, Bushing.
Panel hole: 1.161" long x 0.697" wide.
Note: Standard 3/8" D bushing x 0.552" long.
NSN: 5930-01-076-6448
Made in USA
Learn More - CUTLER-HAMMER - 7580K9 - Switch, toggle. 3PDT C.O. 15Amp 125VAC.Special Price $14.98 Regular Price $17.99Out of stockSwitch, toggle. Contacts: 3PDT.C.O. Contact Ratings: 15Amp 125VAC (10Amp 250VAC, 1HP 1-2-3PH, 115-575VAC). Actuator: On-Ctr, Off-On. Connection: solder. Mech: Panel, 2 hole flange at 0.871" centers. Panel hole: 1.864" long x 1.390" wide x 0.819" deep, plus terminals. Note: 3 Position. Actuator extends to 0.800" from front mount flange. Learn More
- EATON - CUTLER-HAMMER - 8821K6 - Switch, toggle. DPDT 15A 125V.Special Price $14.98 Regular Price $15.95READY TO SHIP - ONLY 19 LEFT IN STOCK!
EATON - CUTLER-HAMMER - 8821K6 - Switch, toggle.
Contacts: DPDT.
Contact Ratings: 125VAC 15Amp.
Actuator: On-Off-On.
Connection: solder terminals.
Mech: panel, single hole mount 15/32 - 32 threaded bushing.
Panel hole: 1.323" long x 0.750" wide x 0.767" deep.
Note: Center off. Bushing length: 0.465" long.
Actuator length: 0.668" long.
Double marked ST52P.
Learn More - Carlingswitch - 2FB53-73 - Switch, toggle. SPDT 15A 125VAC.Special Price $3.71 Regular Price $4.95Switch, toggle. Contacts: SPDT. Contact Ratings: 15Amp/125VAC. Actuator: On-On. Mech: panel, 3/8" bushing. Body: 1.14" long x 0.64" wide x 0.615" high. Panel hole: Contacts: pcb terminals. Note: Bushing length: 0.517" (13.2mm). Actuator length: 0.683" (17.3mm). Learn More
- NIHON KAIHEIKI IND CO LTD - NKK - M2033SS1W40 - Toggle. DPDT-6A Toggle Switch 3-PositionSpecial Price $6.98 Regular Price $8.50
NIHON KAIHEIKI IND CO LTD - NKK - M2033SS1W40 - DPDT-6A Toggle Switch
NKK Switches M Series miniature PCB toggle switches feature several distinguishing characteristics such as a high torque bushing construction to prevent rotation or separation from the frame during installation, an anti-rotation design on all non-cylindrical levers, an interlocked actuator block to prevent switch failure due to biased lever movement, and stainless steel construction to resist corrosion.
- Anti-jamming design protects contacts from damage due to excessive downward force on actuator
- High torque bushing construction prevents rotation or separation from frame during installation
- High insulating barriers increase isolation of circuits in multi-pole devices and provide added protection to contact points
- Molded diallyl phthalate case has a UL flammability rating of 94V-0
- Epoxy sealed terminals prevent entry of solder flux and other contaminants
- Prominent external insulating barriers increase insulation resistance and dielectric strength
- Interlocked actuator block, lever and interior guide prevent switch failure due to biased lever movement
- Clinching of frame to case well above base and terminals provides 1,500 V dielectric strength
M Series Mini Toggle Switch
Switch function: ON-OFF-ON
Voltage Rating: 125VAC / 30 VDC
Current Rating: 6A AC/3 A DC
Contact Material: Silver
3-Position Miniature Right Angle w/Hardware.
Panel / PCB Mount
6-Solder Terminals
Made in Japan
Learn More - Cutler-Hammer / Eaton - T8201 - Switch, toggle. DPDT. PCB.$6.99Switch, toggle. Contacts: DPDT. Contact Ratings: 125VAC 1Amp. Actuator: On-None-On. Connection: 4 Pin PCB pins. Mech: PCB . Body: 15.4mm long plus bat x 10.1mm deep x 6.7mm high. Note: RA Actuator RED. More info: http://www.electro-nc.com/miniature/minp48.pdf Learn More
- Cutler-Hammer / Eaton * - 8805K5 - Switch, toggle. SPDT 10A 125VAC.$12.95Switch, toggle. Contacts: SPDT. Contact Ratings: 10Amp 125VAC. Actuator: On-On (Mom). Connection: solder terminals. Mech: Bushing 15/32" - 32 thread. Body: 1.138" long x 0.643" wide x 0.644" high plus terminals. Note: Only marked ST42F. Learn More
- CUTLER-HAMMER - 8381K22C - Switch, toggle, RED bat. SPST 6A 125V.$3.99Switch, toggle, bat. Contacts: SPST. Contact Ratings: 6Amp 125VAC. Connection: solder terminals. Mech: Single hole bushing mount. Note: Bat / actuator: red. Bushing length: 0.342". Learn More
- Cutler Hammer - SF24STW191 - Switch, Toggle, min. 4PDT 6A 125V.
Cutler Hammer - SF24STW191 - Switch, Toggle, Miniature.
Contacts: 4PDT- Special Circuitry.
Contact Ratings: 6A-125VAC.
Actuator: 3-Positions.
Connection: Silver-Plated Solder Terminals. 12 Solder Terminals
Mech: Panel mount, 0.25" threaded bushing x 7.7mm long. Body: 0.51" x 0.88" x 0.68" behind panel.
Note: Center-On, Alternating on: Poles 1&2, Poles 2&3, Poles 3&4 work in the three positions.
Genuine Cutler Hameer - New Old Stock
Alternate: APEM 5266AB
Learn More - Cutler-Hammer / Eaton * - 8816K5 - Switch, toggle. Contacts: SPDT.Special Price $7.49 Regular Price $10.00Switch, toggle. Contacts: SPDT. Contact Ratings: 10A 125VAC. Actuator: On - On. Connection: solder terminals. Mech: Panel, bushing 15/32" - 32 thread. Body: 1.149" long x 0.632" x 0.90" behind panel. Note: Double marked ST42D. Learn More
- Carlingswitch - HL250-73XN - Toggle. NEW TOGGLE 3PDT$14.953PDT Toggle Switch Circut Type Back Panel Mount Mounting On-Off Switch Action Bat Switch Type H/I Series 11amp 125vac Learn More
- ALCO ELECTRIC - MTG206P - Switch, toggle. DPDT$12.95Out of stockSwitch, toggle. DPDT On-Off-On 6A @ 125VAC, Actuator Type Standard Round, Actuator Length 11.50mm, Panel Mount, Solder Lug, Bushing Thread 15/32-32. Learn More