Toggle Switch

Industrial Cutler-Hammer / Eaton - 8130K20J15V51, DPDT On/Off/On, Center-Off, Motor Reversing Toggle Switch (Already Cross Strapped) Permits usage for Polarity Reversing Motor. Alternate 8951159

White Rocker Identified FWD & REV, 6A-125VAC, 3Amp 250VAC, 2A-277VAC

Six (6) 1/4" Quick Connect Male Tabs, Dimension: 1.45" wide x 1.33" x 1.16"

Panel Mount Fits standard .83 x 1.48 Inch Rectangular opening. Switch secured by included snap-on bezel. 

Very handy item to have around the shop if you are DYI type. Used for all sorts of DC motor reversing applications such as camper trailer jacks, winch controls for in/out operation, door open closed, liftgate up/down, boat navigation and anchor or Automotive Motor Control.

This switch can be used when you want to feed (2) loads from 1 or 2 sources. This switch may also be used as a SPDT switch by simply not using 3 of the terminals.

Made with Pride in USA

 

 

 

Learn More

C & K Components - 7211J2ZLE22 - Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 0.4VA 20V max.

Actuator: Paddle, On-On-On.

Connection: Solder.

Mech: PCB.

Body: Snap in mount frame 24.1mm long x 15.5mm wide.

Miniature.

New Old Stock

Made in the USA.

Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 20V AC/DC 0.4VA. Actuator: On-None-On. Mech: PCB RA through hole. Note: Miniature. Learn More

C & K Components - ET23LD1CKE Switch, toggle.

Contacts: DPDT.

Contact Ratings: 0.4VA 20V AC/DC.

Actuator: On-Off-On (Center-off).

Connection: PC pins.

Mech: PCB.

Panel hole: 0.325" long x 0.365" wide.

Note: Sealed subminiature. Non-threaded bushing.

New Old Stock

Learn More

Switch, toggle, miniature. Contacts: SPDT On-None-On. Contact Ratings: 20V AC/DC 5 Amp. Mech: PCB terminals. Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 20V AC/DC 0.4VA. Actuator: On-None-On. Mech: PCB through hole, Sealed. Note: Miniature. Learn More

C & K Components - ET24MD1V3BE Switch, toggle.

Contacts: DPDT.

Contact Ratings: 0.4VA 20V AC/DC.

Actuator: On-On-On.

Elect config: 6 Pin.

Mech: PCB with mount frame.

Panel hole: 0.324" long x 0.360" wide (with frame 0.394" long x 0.401" wide).

Note: Subminiature.

Non-threaded bushing.

Learn More

Switch, toggle. Contacts: DPDT. Contact Ratings: 0.4VA 20V AC/DC. Actuator: On-On. Mount: PCB RA leads. Dimensions: 8.4mm long (with leads in front and actuator in rear) x 8 1mm wide x 9.2mm high. Unthreaded shaft length: 5.6mm long. Actuator length: 5.5mm long. Note: Miniature. Learn More

Switch, toggle. Contacts: DPDT. Contact Ratings: 0.4VA 20V AC/DC. Actuator: Mom-Off-Mom. Mech: PCB RA. Panel hole: Overall with leads and actuator 30.5mm long x 12.8mm wide x 11.6mm high. Note: Lead free. Rohs compliant. Learn More

Switch, toggle. Contacts: DPDT. Contact Ratings: 0.4VA 20VAC or DC. Actuator: On-None-On. Mech: PCB, sealed. Body: 0.507" long x 0.454" wide x 0.409" high. Unthreaded bushing 0.258" long. Actuator 0.502" long. Note: Miniature. Nylon case. Made in the USA. Learn More

C & K Components - E201MD1ABE Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 0.4VA 20V AC/DC.

Actuator: On-On.

Mech: PCB Right Angle. 

Panel hole: Overall with leads and actuator 30.2mm long x 13.0mm wide x 11.4mm high.

Note: Sealed contacts.

Lead free.

RoHS compliant.

 

Learn More