Toggle Switch

Industrial Cutler-Hammer / Eaton - 8130K20J15V51, DPDT On/Off/On, Center-Off, Motor Reversing Toggle Switch (Already Cross Strapped) Permits usage for Polarity Reversing Motor. Alternate 8951159

White Rocker Identified FWD & REV, 6A-125VAC, 3Amp 250VAC, 2A-277VAC

Six (6) 1/4" Quick Connect Male Tabs, Dimension: 1.45" wide x 1.33" x 1.16"

Panel Mount Fits standard .83 x 1.48 Inch Rectangular opening. Switch secured by included snap-on bezel. 

Very handy item to have around the shop if you are DYI type. Used for all sorts of DC motor reversing applications such as camper trailer jacks, winch controls for in/out operation, door open closed, liftgate up/down, boat navigation and anchor or Automotive Motor Control.

This switch can be used when you want to feed (2) loads from 1 or 2 sources. This switch may also be used as a SPDT switch by simply not using 3 of the terminals.

Made with Pride in USA

NKK NIHON KAIHEIKI - B22EV - B22EV-AH - Switch, Toggle Subminiature.

Contacts: DPDT.

Contact Ratings: 0.4VA 28V AC/DC.

Material: Polycarbonate

Illumination: On-None-On (Up-Down).

Mech: PCB Mount, Right Angle

Has Gold Plated Leads and Gold Plated Contacts.

Precision made switch with Chrome Plated Bat Handle.

Panel Hole: Body 10.2mm Long x 9.00mm wide x 9.0mm High.

Overall with Leads and Paddle 29.5mm Long.

Vertical with Bracket.

Paddle: Flattened.

Made in Japan

NIHON KAIHEIKI IND - NKK - G-22AP  Switch, toggle.

Contacts: subminiature DPDT.

Contact Ratings: 0.4VA 28V AC/DC.

Actuator: On-None-On.

Actuator Material: Glass, Glass fiber, Nylon, Polyamide

Contact Material: Bronze

Contact Plating: Gold

Housing Material: Polyamide

Mount; PCB, Through Hole

Contact Current Rating: 100 mA

Electrical Life: 100 k cycles

Insulation Resistance: 500 MΩ

Operating Temperature: -25C to 85 °C

Max Voltage Rating (AC): 28 V Max Voltage Rating (DC): 28 V

Power Rating: 400 mW

Switch Function; On-On

Switching Voltage; 28 V

Actuator Length; 3.8 mm, Depth; 4.5 mm, Height; 7 mm, Length: 7 mm

NIHON KAIHEIKI IND CO LTD NNK - B22KV-BE - Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 0.4VA 28V AC/DC.

Illumination: On-None-On (Up-Down).

Mech: PCB, Right Angle.

Panel hole: Body 10.2mm long x 9.00mm wide x 9.0mm high.

Overall with leads and paddle29.5mm long.

Note: Snap top for A or B paddle.

Vertical with bracket.

Paddle: Yellow, flattened.

NIHON KAIHEIKI IND CO LTD NNK - B22KV-AF - Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 0.4VA 28V AC/DC.

Illumination: On-None-On (Up-Down).

Mech: PCB, Right Angle

Panel hole: Body 10.2mm long x 9.00mm wide x 9.0mm high.

Overall with leads and paddle29.5mm long.

Note: Snap top for A or B paddle.

Vertical with bracket.

Paddle: Green.

NIHON KAIHEIKI IND CO LTD NNK - B22KV-AC - Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 0.4VA 28V AC/DC.

Illumination: On-None-On (Up-Down).

Mech: PCB, Right Angle

Panel hole: Body 10.2mm long x 9.00mm wide x 9.0mm high.

Overall with leads and paddle 29.5mm long.

Note: Snap top for A or B paddle.

Vertical with bracket.

Paddle: Red.

Made in Japan