Other

GAMMA SCIENTIFIC - RS-10A - Spectral Irradiance Standard, Head. Spectral irradiance standard, head. SN HL912 Regulator Type: Constant Current Output Current: 4A Maximum Current Accuracy, Long Term: Better than 0.5% Temperature Range 15°C to 35°C Applications: Sensor testing and calibration, Calibrate spectroradiometers, radiometers and photometers, Calibrate detector responsivity, Measure reflectance and transmittance Used, Excellent Condition, Expired Calibration. Made in USA Learn More

Thermal probe, for an Electro Scientific thermometer. Probe = Electro Scientific P/N 13672 RdF P/N 20904, S/N 138. Excellent Condition. Learn More

AUGAT - 8136-UG119-36 Test Equipment.

Prototype/universal Board for 96 integrated circuits.

Socket terminal board; universal pattern, i. O. Area

All with Wire Wrap Leads, Gold.

Printed Wiring board.  

Overall dimensions: Length: 10.775" Nominal x Width 6.875" Nom x 0.702" Tall.

NSN 5998-01-234-2353

Learn More

Machinery. Vibration analyzer, no accelerometer. SOLD for parts only. Learn More

DIFFERNTAL COMPARATOR AMP.

Learn More

Noshok - PGL-C-63-N-C-300 - Gauge, Pressure.

0-3000PSI / 0-20000kPa.

Glycerin Filled.

Connection: 1/4" NPT Threaded Shaft.

Dimensions: 2.5" D x 2.5" high x 1.333" deep.

New - Manufactured in Germany.

Learn More

N-Male and 18-pin Male MS connector - Integrated Thermocouple Power Monitor 10Mhz to 12.4Ghz (Head only) Range 0.1-10mW (20db) Max rated pwr 10mw Model 465 guaranteed not DOA or $ cheerfully refunded Learn More

The 616 Digital Electrometer is an auto-ranging (10 mVDC to 200 VDC ranges), .Its 3 1/2-digit LED display includes automatic polarity and decimal point and provides 0.2% voltage accuracy for a wide range of measurements. Essentially a digital multimeter optimized for measurements from high source impedance. Provides wide range capability when measuring current, resistance, and charge in addition to voltage. May need calibration. Learn More

Hewlett Packard - WR-90 X810B

Coupling: 3dB

Band: X

Waveguide SLOTTED SECTIONS

Frequency Range: 8.20 - 12.40 HZ.

Waveguide I.D.: 0.900" +/- 0.0002 X 0.375" +/- 0.001"

Fits Waveguide Siaze:1" X 1/2" EIA WR90

Length: 10"

Equivalent Flamge: UG-135/U

WG Equivalent: WG16

 

Learn More

Hewlett Packard - 3437A

The Hewlett Packard 3437A System Voltmeter is designed for systems. It is a 3 1/2 digit high speed dc voltmeter with sample and hold. The standard unit measures dc volts, provides trigger delay, burst reading capability and Hewlett-Packard Interface Bus (HP-IB). There are three dc floating input ranges: 0.1V, 1.0V and 10.0V full scale with a maximum display of "1998." Sample and Hold allow the 3437A to be an instantaneous reading voltmeter.

The HP 3437A is a High Speed 3 1/2 digit HPIB Systems Voltmeter with sample and hold. It measures DC volts with input ranges of 0.1, 1, and 10 volts full scale. The sample and hold allows for it to be used as an instantaneous voltmeter. The trigger delay can be set from 0.1 microiseconds to 1.0 second and the number of readings can be set from 0 to 9999. The 3437A is HP-IB programmable and has two data output modes: serial ASCII out put and Packed output. The maximum reading rate varies from 3600 to 5700 readings per second depending on the data mode. The input of this unit is what appears to be a 3-pronged BNC connector, this is shown in the photo.

 

• High Speed 3.5 digit system voltmeter with sample and hold
• Measures dc volts, provides trigger delay, has burst reading capability, HP interface bus (HP-1B)
• Has 3 dc floating input ranges: 0.1V, 1.0V, 10.0V full scale with a maximum display of '1998'. Sample and Hold allow the 3437A to be an instantaneous reading voltmeter. The trigger delay can be set from 0.1us to 1.0 second and the number of readings can be set from 0 to 9999 readings.
• Size: 3.5" H x 8.375" W x 20.75" D
• Weight: 12 lb 4 oz
• Used, Excellent Condition 

Note: HP 1990 Catalog Cost New was $3,600.00

 

 

Learn More

Oyster Terminals type 32 Pocket Terminal with 32-character LCD, 40-key keypad. Generates all 128 ACSII codes. New in box with cable between RS232 and DB15-pin connectors. Learn More

Test equipment. Type 1000-P2, 40 Ohm series unit. Used. Learn More

Octave band noise analyzer, no microphone. Used. Learn More

Scanning micrometer eyepiece aperture 50u. Learn More

Century OVA 128GC is a portable, self contained FID and is suitable for measurement of hydrocarbons in the survey mode or gas chromatographic mode. Audible alarms, battery operated and intrinsically safe for Class 1, Div. 1, Groups ABC&D environments. Uses high purity (99.999%) hydrogen as fuel gas. Measures 0-1,000 ppm total hydrocarbons. Linear scale. Includes: Sidepack, Readout, Battery Charger, Hydrogen Fill Line, Close Area Probe, Shoulder Strap, Tool Kit, Earphone, Manual, Case. Learn More

2" Diameter roll x 11" wide. White paper marked with GREEN ink 0 thru 20 with 10 divisions between each. Also marked on Left with times: 11AM Noon and in the center. Learn More

Connector, pins. For test probes. Pin size: 0.025" [ 0.6mm ] square tip x 0.90" long overall. Learn More

AC POWER SOURCE W/SERIES 400V VARIABLE FREQ.OSCILLATOR 45HZ TO 10KHZ

Learn More

Cutler-Hammer / Eaton - E59RP1A2 - iProx Remote Programmer

iProx Sensors are programmed through a remote programming device. This is the device, attached magnetically to the black face cap of the iProx sensor allowing you to teach base level and application parameters to the sensor.

Magnetic Remote Programmer Cable, E59 Series. Connects to computer via a RS-232 connection. Required for Programming Iprox E59 Series Sensors.

The iProx Proximity Sensor represents the highest performance, most versatile tubular inductive sensor offered by Eaton's electrical sector. By utilizing an embedded microprocessor and exclusive SmartSense technology, iProx can sense up to three times farther than typical sensors of its class, while providing an unheard-of level of customization.

Both shielded and unshielded versions of iProx feature extended sensing ranges. This allows the sensor to be mounted farther from the target, thereby reducing the potential for target impacts and increasing the sensing reliability of your application.

The iProx also includes a wide range of advanced features that can be enabled via optional programming tools. Using the ProxView Windows-based software package, an entirely custom sensor can be programmed to perfectly fit an application.

Sensor characteristics, such as sensing range, can be customized down to the nearest tenth of a millimeter. Outputs can be changed from NO to NC. The iProx even features built-in timing delays and speed detection logic. No PLC programming is necessary.

With extended sensing range, quality construction and the ability to adapt to its environment, iProx is the ideal choice for even the most demanding inductive sensing applications.

iProx Proximity Sensor Features:

• Reliably detect metal targets at up to three times the range of conventional shielded or unshielded tubular inductive sensors
• Auto-configure technology automatically detects a sinking (NPN) or sourcing (PNP) connection and switches the sensor accordingly, without any user intervention
• Exclusive SmartSense embedded microprocessor technology allows for customizable range, band sensing, nuisance metal rejection, timing delays and over/under speed detection
• Optional computer programming cable and Windows-based ProxView configuration software makes it easy to customize sensors
• Quality construction using a stainless steel barrel, 360-degree dual-color LED indicator, Ryton impact-resistant face cap and vibration-absorbing potting compound
• Withstands high electrical noise (up to 20 V/m)

 E59RP1 Series A2.

Note: Softward Dics purchased separately.

UPC: 782113761760

Learn More

Audio amplifier. 120VAC 50/60Hz 20Amp. Max input 2400 watt. Learn More

CDI - Coaxial Dynamics - 509146-13 - Model 3023 -  Directional Power Coupler, 225-400MHz

60 W Forward

15 W Reverse.

Model 3023.

Coaxial connectors (0.62" diameteron) the ends

Double marked: ITT Industries 509146-13.

Military 5985-004943532.

New Old Stock - Made in USA

Learn More

CAMBION - 415-1075-01-02-00 - Hardware. Equipment Handle. Material: Steel. Dimensions: Overall Width: 4.883" Long x 1.519" Wide x 0.225" Diameter Inside Depth: 1.199". Each end will accept a 10/32" Bolt. Alternate: Interconnection Products IPI 1075-01-02-00 Applications: Rack Mount Test Equipment, Made in USA Learn More

ASAHI KEIKI - AC-963A-3 - Meter, Digital Tachometer.

The AC-963A displays the number of roller revolutions and outputs alarm signals together with a rotary encoder coupled to the shaft of that roller. In addition, the AM-123 inputs the output signal of an eddy current sensor to display the moving distance of the roller and also to output acoustic alarm signals as well as visual alarm signals with changes in display colors.

Tachometer. 6 Digit.

Display range: 0.0001-999999.

Led 10mm (Red), 8mm (Green).

Mount: Panel.

Complete with Specification Sheets.

Made in Japan

Learn More

Amptrac 8. Mount: 19" rak-panel. Learn More