Test Equipment

Test equipment. Type 1000-P2, 40 Ohm series unit. Used. Learn More

Octave band noise analyzer, no microphone. Used. Learn More

Scanning micrometer eyepiece aperture 50u. Learn More

Century OVA 128GC is a portable, self contained FID and is suitable for measurement of hydrocarbons in the survey mode or gas chromatographic mode. Audible alarms, battery operated and intrinsically safe for Class 1, Div. 1, Groups ABC&D environments. Uses high purity (99.999%) hydrogen as fuel gas. Measures 0-1,000 ppm total hydrocarbons. Linear scale. Includes: Sidepack, Readout, Battery Charger, Hydrogen Fill Line, Close Area Probe, Shoulder Strap, Tool Kit, Earphone, Manual, Case. Learn More

2" Diameter roll x 11" wide. White paper marked with GREEN ink 0 thru 20 with 10 divisions between each. Also marked on Left with times: 11AM Noon and in the center. Learn More

Connector, pins. For test probes. Pin size: 0.025" [ 0.6mm ] square tip x 0.90" long overall. Learn More

AC POWER SOURCE W/SERIES 400V VARIABLE FREQ.OSCILLATOR 45HZ TO 10KHZ

Learn More

Cutler-Hammer / Eaton - E59RP1A2 - iProx Remote Programmer

iProx Sensors are programmed through a remote programming device. This is the device, attached magnetically to the black face cap of the iProx sensor allowing you to teach base level and application parameters to the sensor.

Magnetic Remote Programmer Cable, E59 Series. Connects to computer via a RS-232 connection. Required for Programming Iprox E59 Series Sensors.

The iProx Proximity Sensor represents the highest performance, most versatile tubular inductive sensor offered by Eaton's electrical sector. By utilizing an embedded microprocessor and exclusive SmartSense technology, iProx can sense up to three times farther than typical sensors of its class, while providing an unheard-of level of customization.

Both shielded and unshielded versions of iProx feature extended sensing ranges. This allows the sensor to be mounted farther from the target, thereby reducing the potential for target impacts and increasing the sensing reliability of your application.

The iProx also includes a wide range of advanced features that can be enabled via optional programming tools. Using the ProxView Windows-based software package, an entirely custom sensor can be programmed to perfectly fit an application.

Sensor characteristics, such as sensing range, can be customized down to the nearest tenth of a millimeter. Outputs can be changed from NO to NC. The iProx even features built-in timing delays and speed detection logic. No PLC programming is necessary.

With extended sensing range, quality construction and the ability to adapt to its environment, iProx is the ideal choice for even the most demanding inductive sensing applications.

iProx Proximity Sensor Features:

• Reliably detect metal targets at up to three times the range of conventional shielded or unshielded tubular inductive sensors
• Auto-configure technology automatically detects a sinking (NPN) or sourcing (PNP) connection and switches the sensor accordingly, without any user intervention
• Exclusive SmartSense embedded microprocessor technology allows for customizable range, band sensing, nuisance metal rejection, timing delays and over/under speed detection
• Optional computer programming cable and Windows-based ProxView configuration software makes it easy to customize sensors
• Quality construction using a stainless steel barrel, 360-degree dual-color LED indicator, Ryton impact-resistant face cap and vibration-absorbing potting compound
• Withstands high electrical noise (up to 20 V/m)

 E59RP1 Series A2.

Note: Softward Dics purchased separately.

UPC: 782113761760

Learn More

Audio amplifier. 120VAC 50/60Hz 20Amp. Max input 2400 watt. Learn More

CDI - Coaxial Dynamics - 509146-13 - Model 3023 -  Directional Power Coupler, 225-400MHz

60 W Forward

15 W Reverse.

Model 3023.

Coaxial connectors (0.62" diameteron) the ends

Double marked: ITT Industries 509146-13.

Military 5985-004943532.

New Old Stock - Made in USA

Learn More

Power Supply. Precision, high voltage. Input: 115V 60Hz. Output: +2kV 5mA. Modular. Dimensions: 9" long x 5.5" wide x 2.5" high. HV-BNC connector and terminal strip, fuse holder. Weight: 9.6 lbs. Learn More

CAMBION - 415-1075-01-02-00 - Hardware. Equipment Handle. Material: Steel. Dimensions: Overall Width: 4.883" Long x 1.519" Wide x 0.225" Diameter Inside Depth: 1.199". Each end will accept a 10/32" Bolt. Alternate: Interconnection Products IPI 1075-01-02-00 Applications: Rack Mount Test Equipment, Made in USA Learn More

Power supply, AC. 50Hz 3KW 60A Output, variable. Pilot Lights corresponding to 260 / 130 / 65 / 32.5V 50Hz +/-0.1% 3KW. Input: 208V 3-Phase 24Amps 48-65Hz. Has a Series 815T 50Hz 0.1% Precision Oscillator plug-in. 19"W x 23"D x 16"H. (110V-130V With different plug-in Capable of 45-2000hz) at 3,000 Watts. 270 lbs. INVERTRON Learn More

BIRD - 4169-300 - Thurline Power Sensor, 805-960MHz.

POWER SENSORS FOR 4201A503 / 4201A504

Accuracy: +/-5%

Forward Power Max: 60 W

Reflected Power Max: 6W 

RF Input: Female N

RF Output: Female N

DC Outputs: Solder Lugs.

Finich Gray Powder Coat

Nominal Size: (includes connectors): 4 1/2" W × 1 1/4" H × 1" D, (114 mm × 32 mm × 25 mm)

Weight: 4.5 oz. (128 grams)

New

Learn More

BIRD - 5186C - RF Filter Low Pass

1000MHz Cut off.

Shielded

Used.

Proudly Made in USA

 

Learn More

ASAHI KEIKI - AC-963A-3 - Meter, Digital Tachometer.

The AC-963A displays the number of roller revolutions and outputs alarm signals together with a rotary encoder coupled to the shaft of that roller. In addition, the AM-123 inputs the output signal of an eddy current sensor to display the moving distance of the roller and also to output acoustic alarm signals as well as visual alarm signals with changes in display colors.

Tachometer. 6 Digit.

Display range: 0.0001-999999.

Led 10mm (Red), 8mm (Green).

Mount: Panel.

Complete with Specification Sheets.

Made in Japan

Learn More

ASTEC - AA7281H Power Supply Board.

Factory New

Learn More

UV-Erasable Programmable Logic Device (EPLD) - Low pwr 1-1.5mA/Mhz Pulls - Programmed in tray. J02059-1B For: Gould/Brush Instruments. Learn More

Amptrac 8. Mount: 19" rak-panel. Learn More

5VDC@18.5A@ 55DEG C WITH .005% LINE AND LOAD REGULATION Learn More

110VAC 50/60HZ INPUT AND OUTPUT OF 5VDC@3A AND +AND- 12VDC@1.0A Learn More

TDK KEPCO - RMX 15-A 12B - Switching Power Supply, DC.

Low-Dissipation stabilizers using pulse-width modulation to copntrol output.  

Dual Power Input (AC or DC)

AC Input: 115 VAC  47-440Hz 2.4A, 230 VAC 1.2A

DC Input: 290VDC

Output: 12VDC, 5Amps

Efficiency: >70%

Time Effect drift (8 Hours): Typical <0.02%

Ripple & Noise: Typical <5mV

Current Limit & Over-Voltage Protection

Output: 15VDC +10% / 30%, 5A @ 30C, 4.5@40C, 4.0@50C, 3.4@60

Size A, 7.52" X 3.94" X 2.17" (191mm X 130mm X 55mm)

Shipping Package: 10.5" X 6.25" X 3.25", 3 Lbs.

Made in Japan

Learn More

TDK KEPCO - RMA 12B - Power Supply, DC.

Low-Dissipation stabilizers using pulse-width modulation to copntrol output.  

Dual Power Input (AC or DC)

AC Input: 115 VAC  47-440Hz 4.6A, 230 VAC 2.3A

DC Input: 290VDC

Output: 12VDC, 5Amps

Efficiency: >70%

Time Effect drift (8 Hours): Typical <0.02%

Ripple & Noise: Typical <5mV

Current Limit & Over-Voltage Protection

Output: 12VDC +10% / 30%, 16.6A @ 30C, 15A@40C, 12A@50C, 8A@60

Large Aluminum Heat Sink 

Size B, 8.82" X 5.12" X 3.27" (224mm X 130mm X 83mm)

Shipping Package: 12" X 5" X 9", 5 Lbs.

Made in Japan

Learn More

YOKOGAWA ELECTRIC WORKS (YEW) – 2503-23 - DIGITAL 3 Phase AC POWER METER. Displays Volts, Amps and Watts. Status: Discontinued 5 Digit Display Four 2" x .5" Edgewise Meters. Voltage 3-600 + Aux. Amps 0 .1- 30 +Aux. Dimensions: 18"W x 16"D x 6"H Weight: 35 lbs , Shipping Weight 40 lbs Used – Good Condition - Powers Up - Sold As is -Made in Japan Learn More