Fuse

Cooper/Bussmann - MDL-1/16 

Fuse. 1/16Amp 250VAC.

Time delay.

Glass.

Dimensions: 1/4" x 1-1/4" long.

Package of 5.

Learn More

THERM-O-DISC - 20MAA3FA – Normally Closed Contacts Motor Protecting Temperature Sensor Switch. The Therm-O-Disc line of Motor Protectors offers accurate and reliable protection against hazardous overheating in single phase/single voltage A/C motors. This motor protector employs a snap-acting, current and temperature responsive bimetal disc for proven performance over life. An internal resistance heater utilizes the effects of current to bias the operation of the bimetal disc for added thermal response. A wide range of bimetal and heater combinations are available to cover specific design requirements. This design flexibility and proven performance has made Therm-O-Disc Motor Protectors a popular choice among the leading manufacturers of fractional horsepower motors. The operating mechanism inherent to all Therm-O-Disc Motor Protectors is the snap-action bimetal disc. During abnormal conditions, heat generated by resistance and/or motor ambient causes the bimetal disc to snap at the specified calibration temperature. This allows the circuit to open within the maximum safe limits of the motor windings. Once the motor returns to a normal operating temperature, the bimetal disc resets automatically. This closes the circuit and re-energizes the motor. This same snap-action principle is utilized in millions of Therm-O-Disc products applied in the appliance, heating and air conditioning industries. The Motor Protector features include: • High-speed contact separation ensures long contact life. • Current and temperature responsiveness for excellent design flexibility. The Motor Protector series has been rated by major agencies throughout the world. The agency ratings can be used as a guide when evaluating specific applications. However, the mechanical, electrical, thermal and environmental conditions to which a control may be exposed in an application may differ significantly from agency test conditions. Therefore, the user must not rely solely on agency ratings, but must perform adequate testing of the product to confirm that the control selected will operate as intended in the user’s application. This is an over temperature motor protector which opens its contacts (SPST) when excessive temperature is sensed. Bimetal Resistance: 0.0015 Ohm, Heater Resistance: 0.0320 Ohm Temperature: Opens @ 110 C (230 F), Closes @ 45 C (113 F) Current Rating: 50A @ L.R. 120V, 37 A @ L.R. 240V Dimensions: 1.38" Wide x 1.32" X R2.50 Radius Curved 0.38" Thickness. Weight: 0.5 Ounce (15 Grams) Termination: Two Side Entry 1/4" Quick Connect Terminals. Applications: Commercial, Industrial, and Residential, Including Several Whirlpool, Maytag, Kenmore Dryer as a motor fuse. New Old Stock Made in USA Learn More

Cooper Bussmann No 616 Fuse Holders. Buss Reducers, Adapters, 100 - 60Amp, Class H & K.

Fuse reducers install in fuse clips to permit the installation of smaller size fuses than those for which the clips are designed. UPC 051712331111

• Fits into most panels/switches, including the dead-front type
• Strong contact is maintained both mechanically and electrically
• 100 Amp to 60 Amp, 600 Volts AC
• Fuse Reducer
• UL Class H & K
• Fits into most panels/switches, including the dead-front type
• Strong contact is maintained both mechanically and electrically
• UL Listed (GUIDE # IZZR, FILE #E12853)
• CSA Certified (CLASS 6225-01, FILE #47235)

One pair (2) per box.

UL/CSA Listed.

UPC 051712331111

Alternates: Newark 02B5127, Mouser 504-NO.616, Digi-Key NO.616.ND 

Genuine Cooper Busmann - New Old Stock

 

Learn More

70Amp FUSES 250V (BLADE TYPE) Learn More

Cable Assemblies, Universal Wiring Kit.

Contains 20 feet, 20-2C brown and red wire

2 Inline Fuseholders and 2 Amp Fuses

2 Red Inline Wire Splices

1 Yellow 1/4" Ring Terminal.

Learn More

TE Connectivity RAYCHEM - RXE010 - Fuse. Polyswitch.

60V max.

40Amp max.

urrent hold: 100mA.

Current trip: 200mA.

Trip time: 4s.

Package: Radial Leads.

Learn More

Fuse. 1600Amp 600V or less. Current limiting. Form 480. Interrupting rating 200,000 Amps AC. Blade type. Dimensions: 3" D x 3-3/4" long, plus each blade 2-1/3" wide x 3-1/2" long x 1/2" thick. Note: Gould / Shawmut. Used/Removed from equipment. Learn More

Fuse, micro. 30V 50mA. Package: SMD 1210. Package of 10. Learn More

Fuse. 1/16Amp 250VAC 8AG. Fuse acting. Dimensions: 1/4" D x 1" long, glass. Learn More

LITTELFUSE - 312.062 - Fuse.

1/16Amp 250V 3AG.

Dimensions: 0.25" (6.35mm) D x 1.25" (31.75mm) long.

Package of 5.

Learn More

LITTELFUSE - 275.062 Fuse. Pico II. 1/16Amp 125V.

Very Fast Acting.

Current Rating: 62mA

Voltage Rating: 125 VAC

Interrupt rating: 300A @125V

Physical Size: 2.36mm X 7.11mm

Operating Temperature: -55C to 125C

Mount: PCB Through Hole

Package: Axial Leads.

More info: http://www.littelfuse.com/data/en/Data_Sheets/Littelfuse_Fuse_275-276.pdf

Learn More

Fuse, indicating. 125Amp 75 to 600V AC/DC. Blade type. Class RK-5. Power-Pro. IR: 200KA, 300KA (Self-certified). 20KA DC. Dimensions: 2.090" D x 6-3.4" long. Overall with blade contacts 8-9/16" long. Each blade is 1-1/8" wide x 1-1/2" long and 0.192" thick. Learn More

Fuse. MST250 series, antisurge. 250VAC, 125VDC, 100mA. Mount: PCB through hole 20 x 5mm, 2 pin radial leads. Rohs compliant. Learn More

Fuse. 100mA 250V. Fast-acting. DC Cold resistance: 5.793 Ohm. Pigtail, axial leads. Dimensions: 5 x 20mm (0.236" D x 0.886" L) (6.00mm x 22.50mm)) Note: operating temperature: -55 to 125 Deg C. Lead free. Rohs compliant. Learn More

LITTELFUSE - 273.100 Fuse.

1/10A 125V.

Package: 2 Pin, Micro.

Learn More

Littelfuse - 313.100 Fuse.

1/10 Amp  (100mA) 250VAC.

6.3mm x 32mm

Slo-blo 3AG.

Package: Glass.

Package of 6.

More info: http://www.littelfuse.com/data/en/Data_Sheets/313_315.pdf

Learn More

LITTELFUSE - 1/8 AMP PICOFUSE - 02511.25MAT1L - Fuse.

The PICO® II very fast-acting fuse is designed to meet an extensive array of performance characteristics in a space-saving subminiature package.

251/253 Series

Pico 1/8Amp.

Series: 251

Max. Voltage: 125V

Amperage Rating: .125A (1/8A)

Dimensions: 7x2x2mm

Lead length: 24mm

Package: Axial Leads.

Alternates: 251/125, 02511.25MAT1L

 

Learn More

Fuse. 1/8Amp 250V 3AG. Dimensions: 0.25" (6.35mm) D x 1.25" (31.75mm) long. Package of 5.

Learn More

LITTELFUSE - 313.125 - 313.125HXP  - 3AG1/8 - Slow Blow Fuse.

1/8 Amp 250VAC.

Slow-Blow 3AG.

Package: Glass.

Type: Cartridge Series

Dimensions: 1/4" D x 1" long.

Listed: UL/CSA.

Package of 6.

More info: http://www.littelfuse.com/data/en/Data_Sheets/313_315.pdf

Alternate: Mouser 576-0313.125HXP

Similar Product: Bussman MDL 1/8 Fuse

Learn More

1/8a GLASS FUSES Learn More

Fuse. 125mA (1/8A) 250V, time delay/slo-blo. Package: glass, axial leads. Dimensions: 5mm D x 20mm long. Learn More

FUSES 1/8 AMP approx 31 mm x 6 mm Dia. non-time delay. Call for quant discounts. Learn More

Fuse. Resettable. 100V. Hold current: 0.18A. Trip: 0.65A. resistance: 4 Ohm Package: radial leads. Learn More

Fuse. 3/16Amp 125V 3AG. Slo-Blow. Dimensions: 1/4" x 1-1/4" long. Package of 5. Learn More