Fans

Delta Electronics - EFB1548XHG - 5L58 -48VDC 1.65A DC Brushless Tubeaxial Cooling Fan

Rectangular/Rounded 150mm x 172mm x 50mm, (5.9" x 5.7" X 2")

Operating voltage 48 VDC (24 to 60 VDC)

Operating speed 6000/6500 RPM 

Operating Temperature -10C to +70C

Bearing Type - Ball Bearing Permanently Lubricated

Material -- Housing Die Cast Aluminum, Impeller Thermoplastic, Air Flow at 0 in (mm) H2O 415 CFM (11.75 M3/min)

Noise Level 74.5 dBa

Solid State Brushless DC Motor

Polarity & Lock rotor Protected

Tachometer - Open Collector 28VMax. 2 Pulse/Rev. 

Tachometer Output 5Ma Max VCE 0.5V Max

Lead Wires: - UL 1007 AWG #24 OR Equivalent

Red Wire Positive (+) Black Wire Negative (-)

UL Certified, CSA, TUV or VDE, RoHs Compliant 

EFB Series fans are low air resistant fans featuring over 25mm thickness for a 3-blade design. This standard DC axial fan has a maintenance-free ball bearing system and plastic impeller and aluminum frame.

Slightly Used in Excellent condition.

Made in Thailand

Learn More

EBM Papst Fan, Axial. 48VDC (36-56V), 5.9 watt 3100U/min (3100RPM). 110 CFM, 54 dBA, 49 PSIL dB, With speed sensor tach-out (3rd blue wire). Housing Material: Aluminum,  5 metal blades, 4" leads. Mount centers: 5-7/8". Dimensions: 4-11/16" x 1.5" deep. (119mm x 38mm) Weight  1.15Lbs. (.52kG) Hall Effect Leads. Used/Removed from equipment. UL, CSA, & VDE Approved. Made in Germany. 

Learn More

Fan, axial. 24VDC 0.10A. (12-30VDC 11-29CFM) 2.5 Watt, 11-29CFM. Fan : 2 Wire 62.2mm square x 26.0mm deep. 7 Plastic blade. Mounted on removable plastic frame (overall 4.674" long), with four holes underneath, 70.2mm (2.767") centers. Complete with finger guard. Weight: 5 oz. Note: Brushless electronic motor, polarity protected. There is a four pin connector on the fan (AMP 1-480702-0 with the red positive wire on position 1 and the blue negative wire on position 2 and an interlock jumper between positions 3 and 4). A mating connector is AMP 1-480702-1 with 350690-1 pin contacts. EBM Papst. Made in Germany.

Learn More

MATSUSHITA - Panaflo - FBH-09A24LB - Fan, Axial. 24VDC 0.10A, DC Brushless, New. Voltage: 24 VDC Current: 0.10 Amps (100 mA) Mount: 4.5" Mount Diagonal - 4 Hole. Blades: 7 Plastic Blades. Connection: 2 Wire Leads. Double marked 7BO5D4-B. Dimensions: 3.6" Square x 1" Height (92mm x 92mm x 25mm). Weight: 5 oz. Made in Japan New Old Stock Learn More

Fan, axial. Voltage: 12VDC. Current: 0.32Amp 3.8 Watt, RevA. 7 Blade. Dimensions: 120mm square x 25mm (4.7" sq x 1" deep). Note: Computer cooling fans. Some may have less than 1" leads. Used/Removed from equipment. Learn More

Globe - D47-B10B-04W49-00 Fan, axial.

Power: 12VDC 0.44amp, 3.6 Watt

Air flow: 88 CFM.

Ball bearing.

Material: Plastic.

Dimensions: 1" x 4.7" square (120mm x 120mm x 26mm), 7 blades.

Weight: 6 oz (218.291g)

Used/Removed from equipment.

 

Learn More

GLOBE - D47-B10A-04W2-000 Fan, Axial.

Power Input: 12VDC 0.20A. (Range: 6.0 - 13.8 VDC)

Termination/Connections: 2 Wire Leads.

Speed: 2200 RPM.

Air Flow: 80 CFM.

Lifetime Lubricated Ball Bearing.

Construction: Reinforced Polybutylene

UL-94V.

4 Mounting holes 4.13" spacing.

Dimeensions: 4.69" x 1". (120mm X 120mm X 25mm)

Opening: 4.2".

Weight: 7 oz.

Electronic locked rotor and polarity protected some leads may be short.

Made in Thailand

Life Expectancy: >75,000 Hours

Note: Used/Removed from Equipment - Sell New $26

Approvals: UL CSA VDE CE

Learn More

GLOBE - D24-B10A-04W3-000 Fan, Axial. 

Features:

• Solid State Brushless Motor Design Provides:
  - Improved Performance
  - High Efficiency
  - Auto Restart
  - Low Input Power
  - Lower Operating Voltages
• Precision Ball Bearing System Provides:
  - Longer Life
  - Higher Temperature Extremes
  - Lower Noise Over Time
  - Maximum Shock and Vibration Resistance
• Designed to Meet the Rigid Standards of UL, CSA, VDE, and CE
• Electronic Locked Rotor Protection
• 12VDC 0.13Amp, 3600 RPM, 17CFM, 1.44 Watt.
• Efficient extra low current draw.
• Low noise, ball bearing, 28dBA.
• Dimensions: 2.36" x 2.36"x 1" (60mm X 60mm x 25mm),
• Maximum Operating Temperature 70C
• Minimum Operating Temperature -10C
• Rotation CW
• 2.3 Oz.
• 5 blade. Material: Plastic. 2 Wire leads.
• RoHS Compliant

Used/RFE.

 

 

Learn More

COMAIR ROTRON - MC12B7X - 12VDC Muffin Fan 0.66Amp

Voltage Range: 6 VDC to 14 VDC

Power: 7.9Watt

Nominal Speed: 3700 RPM

Airflow: 102 CFM

PTC & Polarity Protected

Three (3) wire - The 3rd is a 5 Volt TTL Tachometer Output - Two Pulses per Revolution

Blades: 5-Blade Plastic

Dimensions: 4.72" Square X 1.26"  (120mm x 120mm X 30mm)

Mounting Holes  4.125" Square

Weight: 0.85 Pounds

Excellent Condition - Lightly Used - Removed from Equipment.

Alternate: 031414

Note: Newer Production Comair Rotron Fans are inferior and made in China.

 

Learn More

08127B Fans, Accessories.

Finger guard for 10" round fans. (254mm Diameter) Rings

Dimensions: 8-3/4" D with 9-3/4" mount centers, 4 mounting holes.

Material: Steel, Bright Nickel Chrome Plating.

 

 

Learn More

NIDEC-TORIN - TA225DC - A31390-10 Fan, Axial.

Input Power: 12VDC 0.08A. 2 Wire/Pin.

Speed: 2600 RPM.

Air Flow:12 CFM.

Construction: 9 plastic blades metal frame.

Mounting: 2 hole 2.78" spacing.

Dimensions: 2.37" x 2.71" x 0.8".

Opening: 2.25".

Ball Bearings.

Weight: 3.6 oz.

Terminals Out Top, Solder or Small Quick Connect

Model A31390-10.

Made in Japan

Learn More

NMB Minebea - 2410ML-04W-B20 Micro Boxer Axial Fan 

Auto restart/Polarity Protection

3600 RPM

12VDC 0.16A,

16.9 CFM,

Ball Bearing construction

7 plastic blades, 4 hole 2" spacing.

Dimensions: 2.36" x 1", 2 wire.

Operating Temperature -10C to +70C

Opening: 2.25".

Weight: 2.2 oz.

Low noise, 28 dB

Used/Removed from equipment, some may have short 1" leads. 

Made in Thailand

Learn More

Mopar - Chrysler Dodge Plymouth  -  Heater  - Blower Motor Switch, Rocker, Automotive.

Actuator: 4 Position (Off is Open, LO=C TO L, MED= C TO M, HI=C TO M + HI).

Connection: (4 Terminal) Male Quick Connect terminals.

Body: Overall 1.316" long x 1.448" wide x 1" behind panel.

Actuator extends to 1.571" above assembly.

Note: Blower Motor Switch.

Mounted on a plate 1.316" long x 1.448" wide.

Vintage - Genuine Chrsyler Dodge Plymouth - Factory New Old Stock

Similar to 3502681 (1970's Vintage)

Alternate Appplications - Hobbyist Motor/Fan Control

Learn More

COMAIR ROTRON - ST12G6X - 031504 - Fan, Axial, Sprint DC.

12VDC 0.12Amp 1.4 watt,

Airflow: 33 CFM.

Sprint DC.

Plastic 5 blades.

PTC & Polarity Protected

Mount: Panel 4 holes with 2.82" centers.

Dimensions: 80mm Square x 32mm wide.

Note: Alt P/N: 031504.

UL, CSA Listed 

Condition: LN Used/Removed from equipment.

Mixed length on lead wires. Some slightly dusty/dirty.

Weight 7 oz.

Learn More

Fan, accessories. Mesh finger guards for computer cooling fans. Very flexible 2-1/4" square x 1/4" thick, 2-5/8" mt ctrs. Learn More

Qualtek - 08127 Fan Guard

10" Diameter for Computer Cooling Fans.

SAE 1008, 10 in., Nickel Chrome, 0.091 in. (Ring Material), 6.85 in.

New.

Alternate: Multicomp MC08127

 

Learn More

Fan, accessories. Metal finger guard for 4.25" fans, 5-7/8" centers. Learn More

RBM CONTROLS/ESSEX - 54-6406 - 12VDC SPST Automotive Blower Relay

NO 72-Ohm Coil

Auto Automotive Blower Relays

3-Terminal

1/4"Quick Connect Lug/Terminals

Note: Terminals 1 + 3 are N.O. contacts, Terminal 2 is positive 12V, case is neg or ground, with a heavy steel housing - flange mount 2 holes 1.7" centers 3.7oz

Learn More

12VDC Fan 0.35A brushless (RFE/Used) mixed manuf JMC/DA-TECH 0825-12HBT, etc 3.155" (80.1mm) x 3.155" (80.1mm) x 0.982" (24.9mm) deep with one finger guard attached and a 3-cond 4" wire Learn More

TRW GLOBE - 19A2689 Fan, Axial. Xerox 127P1668 

A Vaneaxial fan consisting of a disk-type wheel within a cylinder with a set of air guide vanes. It has a higher efficiency than any other type of axial-flow fans and more expensive to manufacture.

24VDC.

Vaneaxial.

Dimensions: Round 2.620" D x 2.577" deep.

Mounts in hole with instrument-style flange front, four holes 2.111" apart, 3" centers.

Four plastic blade.

Two wire, 5" long with a 2 position Molex connector.

Made in USA

Learn More

COMAIR ROTRON - KM3AF 028121 - Fan, Skeleton.

Voltage / Current: 230VAC 0.09A.

2 Wire - 12" Leads.

3 Plastic Blades.

Open Frame: 143mm, 4 Hole 4.4" Spacing. 4.75" x 1.6".

Opening: 4".

Weight: 12 oz.

4 metal legs for mounting,

Impedance Protected - Scout

UL CSA.

Alternate: Rotron MU3A2

Vinatage - New Old Stock - Rare - Very DurableD

Learn More

COMAIR ROTRON - BT62A1

Comair Rotron is the leading supplier of standard and value added fans and blowers for a broad range of markets, including electronics, computers, telecommunications and HVAC (heating, ventilation and air conditioning). Comair Rotron has set the worldwide standard in the design of forced air electronic component cooling devices.

Biscuit Series Blower Feautures:

STANDARD FEATURES 
• Size: 120.4 x 40.6 mm deep (4.74” x 1.6” )
• Operating Temperature: -10°C to +70°C
• Storage Temperature: -40°C to +85°C
• Weight: 510 g (18 oz.)
• Sleeve Bearings
• Impeller & Venturi: Polypropylene

•Outstanding CFM Performance in HighPressure Systems

• Extended Bearing Life

• Designed with optional performance features 

Voltage:24VAC

Current: 0.92A 

Fits inside a 1-3/4" Rack Mount. 

New Old Stock

Learn More

Fan, accessories. Plastic 123.5mm OD square snap on fan guard, 118mm ID. Color: black. Learn More

EBM Papst - S2E300-BP02-34 - Axial Fan with Guard Grill.

Status: Discontinued

S2E300 Series = Axial Fan w/Guard, 2 Pole Single Phase, Thermal Managed Fan

230VAC 50/60Hz 1.55A

Speed: 3,000RPM (230/350W 1.10/1.55A 2700/3000-RPM).

Single Phase Motor requiring Motor Run Capacitor (8uF 400VAC capacitor- Purchased Separately).

Package: 14.75" Diameter, Open Frame

Bearing Type: Ball Bearing

5 Metal Sickled Blades and 13" Fingerguard.

Overall Fan Blade Diameter 300mm (11.8"). 

Environment: IP44

Weight: 9 lbs.

EBM/Papst. (Estimated 11 lbs packed).

Alternates: Allied Stock 71006289, Mouser 5912-S2E300-BP02-34, Digi-Key S2E300-BP02-34-ND

Rohs Compliant

Made in Germany

This model has been replaced with a less expensive China replacement that inferior to German quality.

 

Learn More