DC Fans

Delta Electronics - EFB1548XHG - 5L58 -48VDC 1.65A DC Brushless Tubeaxial Cooling Fan

Rectangular/Rounded 150mm x 172mm x 50mm, (5.9" x 5.7" X 2")

Operating voltage 48 VDC (24 to 60 VDC)

Operating speed 6000/6500 RPM 

Operating Temperature -10C to +70C

Bearing Type - Ball Bearing Permanently Lubricated

Material -- Housing Die Cast Aluminum, Impeller Thermoplastic, Air Flow at 0 in (mm) H2O 415 CFM (11.75 M3/min)

Noise Level 74.5 dBa

Solid State Brushless DC Motor

Polarity & Lock rotor Protected

Tachometer - Open Collector 28VMax. 2 Pulse/Rev. 

Tachometer Output 5Ma Max VCE 0.5V Max

Lead Wires: - UL 1007 AWG #24 OR Equivalent

Red Wire Positive (+) Black Wire Negative (-)

UL Certified, CSA, TUV or VDE, RoHs Compliant 

EFB Series fans are low air resistant fans featuring over 25mm thickness for a 3-blade design. This standard DC axial fan has a maintenance-free ball bearing system and plastic impeller and aluminum frame.

Slightly Used in Excellent condition.

Made in Thailand

Learn More

EBM Papst Fan, Axial. 48VDC (36-56V), 5.9 watt 3100U/min (3100RPM). 110 CFM, 54 dBA, 49 PSIL dB, With speed sensor tach-out (3rd blue wire). Housing Material: Aluminum,  5 metal blades, 4" leads. Mount centers: 5-7/8". Dimensions: 4-11/16" x 1.5" deep. (119mm x 38mm) Weight  1.15Lbs. (.52kG) Hall Effect Leads. Used/Removed from equipment. UL, CSA, & VDE Approved. Made in Germany. 

Learn More

Fan, axial. 24VDC 0.10A. (12-30VDC 11-29CFM) 2.5 Watt, 11-29CFM. Fan : 2 Wire 62.2mm square x 26.0mm deep. 7 Plastic blade. Mounted on removable plastic frame (overall 4.674" long), with four holes underneath, 70.2mm (2.767") centers. Complete with finger guard. Weight: 5 oz. Note: Brushless electronic motor, polarity protected. There is a four pin connector on the fan (AMP 1-480702-0 with the red positive wire on position 1 and the blue negative wire on position 2 and an interlock jumper between positions 3 and 4). A mating connector is AMP 1-480702-1 with 350690-1 pin contacts. EBM Papst. Made in Germany.

Learn More

MATSUSHITA - Panaflo - FBH-09A24LB  Fan, axial. 24VDC 0.10A, DC Brushless.

Dimensions: 3.6" square x 1" deep.

4.5" mount diagonal - 4 hole.

7 plastic blades.

2 wire leads.

Double marked 7BO5D4-B.

Weight: 5 oz.

Learn More

Fan, axial. Voltage: 12VDC. Current: 0.32Amp 3.8 Watt, RevA. 7 Blade. Dimensions: 120mm square x 25mm (4.7" sq x 1" deep). Note: Computer cooling fans. Some may have less than 1" leads. Used/Removed from equipment. Learn More

Globe - D47-B10B-04W49-00 Fan, axial.

Power: 12VDC 0.44amp, 3.6 Watt

Air flow: 88 CFM.

Ball bearing.

Material: Plastic.

Dimensions: 1" x 4.7" square (120mm x 120mm x 26mm), 7 blades.

Weight: 6 oz (218.291g)

Used/Removed from equipment.

 

Learn More

GLOBE - D47-B10A-04W2-000 Fan, Axial.

Power Input: 12VDC 0.20A. (Range: 6.0 - 13.8 VDC)

Termination/Connections: 2 Wire Leads.

Speed: 2200 RPM.

Air Flow: 80 CFM.

Lifetime Lubricated Ball Bearing.

Construction: Reinforced Polybutylene

UL-94V.

4 Mounting holes 4.13" spacing.

Dimeensions: 4.69" x 1". (120mm X 120mm X 25mm)

Opening: 4.2".

Weight: 7 oz.

Electronic locked rotor and polarity protected some leads may be short.

Made in Thailand

Life Expectancy: >75,000 Hours

Note: Used/Removed from Equipment - Sell New $26

Approvals: UL CSA VDE CE

Learn More

GLOBE - D24-B10A-04W3-000 Fan, Axial. 

Features:

• Solid State Brushless Motor Design Provides:
  - Improved Performance
  - High Efficiency
  - Auto Restart
  - Low Input Power
  - Lower Operating Voltages
• Precision Ball Bearing System Provides:
  - Longer Life
  - Higher Temperature Extremes
  - Lower Noise Over Time
  - Maximum Shock and Vibration Resistance
• Designed to Meet the Rigid Standards of UL, CSA, VDE, and CE
• Electronic Locked Rotor Protection
• 12VDC 0.13Amp, 3600 RPM, 17CFM, 1.44 Watt.
• Efficient extra low current draw.
• Low noise, ball bearing, 28dBA.
• Dimensions: 2.36" x 2.36"x 1" (60mm X 60mm x 25mm),
• Maximum Operating Temperature 70C
• Minimum Operating Temperature -10C
• Rotation CW
• 2.3 Oz.
• 5 blade. Material: Plastic. 2 Wire leads.
• RoHS Compliant

Used/RFE.

 

 

Learn More

COMAIR ROTRON - MC12B7X - 12VDC Muffin Fan 0.66Amp

Voltage Range: 6 VDC to 14 VDC

Power: 7.9Watt

Nominal Speed: 3700 RPM

Airflow: 102 CFM

PTC & Polarity Protected

Three (3) wire - The 3rd is a 5 Volt TTL Tachometer Output - Two Pulses per Revolution

Blades: 5-Blade Plastic

Dimensions: 4.72" Square X 1.26"  (120mm x 120mm X 30mm)

Mounting Holes  4.125" Square

Weight: 0.85 Pounds

Excellent Condition - Lightly Used - Removed from Equipment.

Alternate: 031414

Note: Newer Production Comair Rotron Fans are inferior and made in China.

 

Learn More

NIDEC-TORIN - TA225DC - A31390-10 Fan, Axial.

Input Power: 12VDC 0.08A. 2 Wire/Pin.

Speed: 2600 RPM.

Air Flow:12 CFM.

Construction: 9 plastic blades metal frame.

Mounting: 2 hole 2.78" spacing.

Dimensions: 2.37" x 2.71" x 0.8".

Opening: 2.25".

Ball Bearings.

Weight: 3.6 oz.

Terminals Out Top, Solder or Small Quick Connect

Model A31390-10.

Made in Japan

Learn More

NMB Minebea - 2410ML-04W-B20 Micro Boxer Axial Fan 

Auto restart/Polarity Protection

3600 RPM

12VDC 0.16A,

16.9 CFM,

Ball Bearing construction

7 plastic blades, 4 hole 2" spacing.

Dimensions: 2.36" x 1", 2 wire.

Operating Temperature -10C to +70C

Opening: 2.25".

Weight: 2.2 oz.

Low noise, 28 dB

Used/Removed from equipment, some may have short 1" leads. 

Made in Thailand

Learn More

COMAIR ROTRON - ST12G6X - 031504 - Fan, Axial, Sprint DC.

12VDC 0.12Amp 1.4 watt,

Airflow: 33 CFM.

Sprint DC.

Plastic 5 blades.

PTC & Polarity Protected

Mount: Panel 4 holes with 2.82" centers.

Dimensions: 80mm Square x 32mm wide.

Note: Alt P/N: 031504.

UL, CSA Listed 

Condition: LN Used/Removed from equipment.

Mixed length on lead wires. Some slightly dusty/dirty.

Weight 7 oz.

Learn More

12VDC Fan 0.35A brushless (RFE/Used) mixed manuf JMC/DA-TECH 0825-12HBT, etc 3.155" (80.1mm) x 3.155" (80.1mm) x 0.982" (24.9mm) deep with one finger guard attached and a 3-cond 4" wire Learn More

TRW GLOBE - 19A2689 Fan, Axial. Xerox 127P1668 

A Vaneaxial fan consisting of a disk-type wheel within a cylinder with a set of air guide vanes. It has a higher efficiency than any other type of axial-flow fans and more expensive to manufacture.

24VDC.

Vaneaxial.

Dimensions: Round 2.620" D x 2.577" deep.

Mounts in hole with instrument-style flange front, four holes 2.111" apart, 3" centers.

Four plastic blade.

Two wire, 5" long with a 2 position Molex connector.

Made in USA

Learn More

Protechnic Magic - MGT8024HB-O25 - IP68 Waterproof Fan

DC Brushless Fan, Axial with Lock Rotor Protection.

28VDC 0.16 Amp. 3 Wire

Dual Ball Bearing

3000 RPM +/- 10%

Airflow: 41.34 CFM

Noise: 33.2dB (A), Max. 36.2 dB(A)

Life Expectancy: 70,000 hrs at continuous 40C 

Mount: 4 hole with 4" centers and 18" wire leads of which 8" is Watertight.

Housing material: Plastic with 7 plastic blades.

Dimensions: 80X80X25mm

Ingress Protection Rating: IP68 

Operating Temp. -10 to 70C, Storage Temp. -40 to 70C

 

Learn More

TOYO - TFDD8024RXA - Fan, Axial.

Supply Voltage: 24VDC

Supply Current:0.145 Amp.

DC Brushless, Ball Bearing.

Mount: 4 hole with 4" centers and (2) 10' wire leads.

Housing material: plastic with 7 plastic blades.

Dimensions: 3.17" Square x 0.91" (23.1mm) deep. (80 X 80 X 25 mm)

Note: Ball bearing.

Made in Japan

Learn More

Thermalloy/Aavid - 2325B-TCM45S - Heatsink with 5V Cooling Fan

Cooling performance approaches recirculating liquid

Dimensions: 2.1[53.5mm] x 2"[51mm] x 0.8"[20mm] high mount with epoxy

5VDC Cooling Modules for Microprocessors

5VDC Fan plastic 9-Blades with a 2x 6-Inch leads.

Factory New.

Learn More

EBM Papst - W2G076-BD01-13 - Fan, Axial, Ball Bearing.

Voltage:  12VDC

Nominal Voltage Rating: 6 -16 VDC

Power: 4.0 watt

Air Flow: 67 m3/h

Speed: 4200 RPM

Sound Power Level: 5.8B

Sound Pressure Level: 43

Numer of Blades:5 Blade

Construction Material: Glass-fiber reinforced PBT/PA Plastic.

Temperature: -20 C to 75 C

Connections: Quick Connect

Dimensions: 3.15" square x 1.26" deep (80mm x 32mm).

Service Life: 62500 Hours

Protection: IP54 / IP68

Approvals: VDE, CSA, UL, CE

Used/Removed from equipment.

EBM Papst.

Learn More

EG&G-ROTRON - SD24B1 - Fan, Axial.

Rotron DC fans feature outstanding airflow performance in high pressure systems and all include a permanent split capacitor motor. An extended ball bearing life ensures fault-free use for a significant period of time and ensures Rotron DC fans provide a flexible and dependable cooling solution.

24VDC 0.12Amp, 35CFM. 2 wire 12".

Metal housing, 7 plastic blades.

Mount: 4 hole 4" centers.

Dimensions: 80 x 80 x 38mm (3-1/4" square x 1-5/8" deep).

Ball bearing. DC Brushless.

Air Flow: 59m³/h (35CFM)

Noise Level: 47.6dB

Fan Speed: 3500rpm

Bearing Type: Ball

Polarity protected. Sprite.

Approvals: UL, CSA, TUV.

New Old Stock

Made in USA

Learn More

DC CENTAUR - CNDC24K4-601 Fans, Axial.

24VDC 11 Watt.

Brushless, Ball Bearing, 5 Plastic blade.

Dimensions: 120 x 39mm.

Bearng Type: Ball Bearing

Housing: Aluminum Cast.

Used/removed from Equipment.  Old Stock

Dimensions: Width: 1 in, Height: 4.7 in, Length: 4.7 in (36mm X 120 mm X 120Mm)

[Note: These fans have three wires, the Red and White wires connect to +24VDC, the Black wire connects to the negative side of the 24VDC source.

Made in Japan

Retail for $75

Learn More

Fan, axial. 12VDC 0.17Amp. Plastic, 7 blade. Complete with (unattached) heatsink 2.909" long x 2.525" wide x 1.003" high. New. Note: Double marked A50441-002. New. Learn More

Intel / Nidec - F07R-12B4S1 - Fan, Axial A50933-003.

3 Pin CPU Cooling Fan

Voltage/Current: 12VDC 0.17Amp.

Socket Compatibility: Socket 370

Fan DIameter: 75mm

Ball Bearing

Material: Thermoplastic

Color: Black

Plastic, 7 blade.

Complete with (unattached) heatsink 2.909" long x 2.525" wide x 1.003" high.

New in Blister Pack. 

Note: Double marked A50933-003 and 03AC1.

Applications: Pentium 3 and others.

Learn More

Fan, axial. 12VDC 3.36 watt 13.42CFM 10300RPM 40dBA. With tach. Dimensions: 40 x 40 x 28mm. Note: Mini. Learn More

COMAIR ROTRON - MC12S3H - 030583 - Fan, DC.

Comair Rotron DC Therma Pro-V thermal speed control fans are an ideal solution when multiple fans are required to respond to a single temperature input and run simultaneously. The required thermistor can be positioned up to 650mm from the fans themselves, allowing for increased flexibility and ease of use. Additionally, the fans will run at a normal speed if the temperature sensor fails. Comair Rotron DC Therma Pro-V thermal speed control fans are low noise and low on power consumption, enabling the use of multiple fans at less of a noise or energy cost.

Nominal Voltage = 12 vdc

Operating Voltage Range = 6 – 14 vdc

Nominal Running Current = 0.540 amps

Max Locked Rotor Current = 1.00 amps

Running Power = 6.4 watts

Average Speed = 3200 RPM

Bearings = Ball Bearing

Air Flow = 90 CFM

Acoustic = 45.0 dBA

Construction: Venturi: Plastic, Black, UL 94V-0

Propeller: Plastic, Black, UL 94V-0

Life Expectancy: This fan is designed for continuous duty life of 50,000 Hours at 40°C.

Additional Features:

Brushless DC Motor

Electronic Locked Rotor Protected

Polarity Protected

Automatic Restart Capability

Thermal Speed Control

Operating Temperature: -10°C to 70°C

Storage Temperature: -40°C to 85°C

Termination: 12” Lead wires, 22AWG, UL 1061

PTC on 24” Zip cord

Red = Fan Power

Black = Fan Ground

Agency Approvals: UL, CSA, TUV

Dimensions: 120x120x32mm.

Learn More