Test Equipment

Power Supply. 20VDC 13Amp. Learn More

Tuning unit. GP-7, WW II Navy aircraft antenna tuner. Frequency range: 4525 to 6500 KC. Range E. Plug-in. Mount: Panel/Rak. Dimensions: 10-1/4" wide x 8-1/3" deep x 8-3/16" high (behind panel). With a 4 hole mount at 12-1/4" centers. Note: Antique, sold as is. Learn More

PROGRAMMABLE MULTI FUNCTION INTERFACE w/ 3 50M40 Relay Scanner Cards

Learn More

Power supply. Output: +15VDC 4.5Amp. Input: 100/120/215/230-240V~. 1.7/1.5/0.8/0.8A~ 47-63Hz. Derate 10% for <58Hz operation. Open frame. NIB. Note: Maybe replaced with equal by Condor HN15-4.5-A+. More info: http://www.power-one.com/resources/products/appnote/n_linear_agencyapproval.pdf Weight: 7.4 lbs. Learn More

Hardware, alligator clips. 10 Amp. Note: May have a bit of "RUST" from moisture during storage. Compatible with all shrouded, unshrouded, or retractable 0.16" (4mm) banana plugs, solder or crimp connection, jaw opens 0.31" (7.9 mm) max. Material: nickel-plated steel (BU-60). Length: 1.97" (50mm). Package of 25. Learn More

Connectors, electrical contacts. Pogo spring-loaded radius contacts gold tipped. Spring force: 1 - 2.2-Oz. Stroke 0.10"-0.07". Centerline 0.050". 3 Amps Max. 0.026"D x 0.68"L Res<30milliohm. Package of 10. Learn More

Programmable stand alone datalogger with PC interface. The test data can be transferred to a spreadsheet for statistical analysis, presentation and printout. Manual gives much more data. 3 x Cell voltage monitors. power supply and battery tester controller, all in one small desk mount cabinet. Learn More

Power Supply. Switcher 28VDC 5.4A 150 watt. Input: 100-120/200-240V 4.6/2.3A 47-440Hz.Single output, remote sensing and trim. FlatPac, 9" x 2.5" x 1.3" high. With connection hardware and instructions. UL CSA TUV. Weight: 3 lbs. Learn More

Power Supply. +5V@80 Amp, -12V@10 Amp, +12V@10 Amp, +24V@2 Amp. Universal 115VAC/230VAC-Input. Switching. Open frame. No fan. Note: Used/Removed from equipment. Learn More

Connector, binding post. Contact ampacity: 15Amp. Insulation material: Non-insulated. Contact plating: Nickel plated brass head and body. Outside dimensions: 10mmD, 14.1mm closed, 18mmH extended. Note: Knurled knob screw actuation. 2.8 x 4.7mm slot for wires. Mounts from bottom with 6/32 screw (not included). Package of 4. Learn More

Power supply. 2.2VDC 400Amp. Switching. OUTPUT ADJUSTABLE +/- 10% 90-132 or 180-246VAC SINGLE PHASE INPUT. REGULATION: LINE- 5mV OR 0.1% LOAD- 10mV OR 0.2%. FOLDBACK CURRENT LIMITING - FORCED AIR COOLING - REMOTE SENSING - REMOTE PROGRAMMING - OVERVOLTAGE PROTECTED AND OPTION "F" EMI FILTER. NIB. Weight: 21 lbs (Packed).. Learn More

12VDC @ 1.3AMP Sealed modular PC mount 120/250Vac-In MFG. NEMIC/LAMBDA Learn More

Input: 44-58VDC 7.1A(max) 310W. Output:24VDC Adj: +/-5% Regulation 0.1% Line or No Load - Full Load. Remote Programming by External Resistor 1Kohm/V or 1-1 Voltage. Ripple & Noise: 10mVrms, 35mV-peak - Ruggedized. Input surge Protection, Input Polarity Prot., Overvoltage 26.5-28V Protection, Overload Protection Thermal And Electrical. Remote Programming, FUNGUS inert. 3-3/16 x 5 x 15" 15-pounds shipping. New w/ manual & schematic. Learn More

HP 6034L System DC Power Supply HPIB Auto-everything 200 Watt 0-60VDC @ 0-10A RAK MOUNT POWER SUPPLY - Digital Readouts Learn More

Brand new replacement pens for Brush instruments. Thermal chart recorders. Size: 4.2" long, 2-leads. Learn More

Power supply. AC Adapter. Input: 120VAC 60Hz 8 Watt. Output: 7.25VDC 150mA. Wall mount enclosed. Learn More

Power supply. AC adapter. Output: 8VDC 600mAdc. Input: 120VAC 60Hz 10 watt. Complete with attached 5.5 foot power cord and a 3.5mm plug. (Tip is negative). Learn More

Three Outputs: Two 12-19VDC at 10A each, Plus Two Large Screw Terminals "13VAC -4A." "VOLTS I/P: 187-264V AC" New. 15" long x 5"wide x 2.25" in black Shielded Enclosure. Learn More

Power supply, switcher. +3.3VDC at 19.5Amps and +12VDC at 3Amp Max. 82Watt Max OUT - INPUT: 100-240VAC~2.3A 60/50Hz 6" x 4" x 1.3"High Weighs just under one pound. 2-pin Input and Three Terminal Output, prewired with Four +3.3V leads, Four Black Common leads and two +12V leads into 12-pin connector. Two pin Power Input - Beautiful NEW Switcher !!! UL-CE-TUV APL Approved.

Learn More

AC adapter. Output: 16VDC 800mA. Input: 120VAC 0.2Amp 60Hz. Enclosed. Complete with attached 7 foot cord and 5.5mm plug. Learn More

15VDC 11AMPS POWER SUPPLY - Used - 12"L x6-3/4"Hx4-3/4"W Approx 25# shipping Learn More

Power supply, AC adapter. Output: 6VDC 400mA. Input: 120VAC 60Hz 4.5 watt. Wall mount/plug-in. Class 2. Center pin positive. Learn More

PROBE replacement parts 8-1/2 Foot probe cable with an uncovered probe at each end - 0ne end single cond wire 2-3/4" long - other end has 180-ohm res in series with output - No probe covers or connectors Learn More

Power Supply. Output: 5VDC 500mA. This board uses a Signal Transformer ST-5-16 split/tran Class B-3 Transformer. Fused primary. Has four 1/4" male QC terminals. LM317T VR. Dimensions: 2.1" x 4.4" x 1.5" high. Weight: 12 oz. More info: http://www.signaltransformer.com/sites/all/pdf/ST.pdf Learn More