Inductors

Alcara - A220-101P - Inductor, choke. 2.8mH. New. Learn More

Murata - DST310 55Y5S222M100 - EMI/RFI Suppression DST310 Series Filter.

Based on more than 30 years of ceramic and ferrite technology experience, Murata Electronics’ full range of leaded EMI filters have been designed to meet today’s electronic industry requirements. Murata’s leaded devices consist of ferrite bead inductors, feed-thru capacitors, 3 terminal capacitors, varistor/capacitors common mode chokes and block filters.

DST310 are T-type EMI suppression filters. The disc-type EMIFIL increases the self-resonant frequency of the capacitor by attaching two lead wires to one of the electrodes of the capacitor and increases the insertion loss by adding inductance to the lead in the DST and DSS types only. Frequencies to be suppressed can be selected by choosing the capacitance. They are also recommended for use as by-pass capacitors.

Capacitance: 2200pF

Effective Frequency: .8 to 12000 MHz

Working Voltage: 100V.

Tolerance: 20%.

Temperature: -25C to 85C

Package: Through Hole Disc, Radial Leads.

External Ferrite Beads

Packaging: Bulk

New Old Stock - Rare - Difficult Component to Find

Learn More

Inductor. 8.2nH 700mA. Tolerance: 5%. DC Resistance: 80mOhm. Case: 0603 (1610 metric) SMD. New. Note: RF inductor. Test frequency: 900MHz. Type: Wirewound, RF chip inductor. Learn More

Miller - Adjustable Inductor. Slug tuned coil form.

Adjustable Ferrite Core

1.4 - 2.2uH.

Mount: PCB, 3 leads.

Dimensions: 6.6mm square x 12.9mm high.

Package of 10.

Learn More

EMI Suppression Filters. Chip ferrite bead. Impedance: 1000 Ohm 200mA. DC Resistance: 0.4 Ohm. Package: SMD 0805. Package of 25. Note: For high speed signal. Learn More

Inductor, ferrite bead. EMI Suppression Filters. Impedance: 1 Ohm. Package: SMD 0805. Package of 25. Note: For power lines. Learn More

Carter Craft Communications - 90-012 - CB/HAM Radio Alternator / Generator Filter, 3 to 30 MHz.

Radio Noise Suppressor Filter

Maximum Current: 25 Amps

Filters "Whining" Noise from Generator Brushes

Easily Installed in Minutes

Large Inductor and Tunable Ceramic Capacitor design for maximum efficiency

For 6, 12 or 24 VDC Systems

Installation instruction attached and on Packaging.

New Old Stock - Made in USA

Alternate / Equivalent: Monarch GNF-1

Learn More

Inductor, ferrite bead. EMI suppression filter. 600 Ohm 200mA 25%. DC Resistance: 1.1 Ohm. Case: 0805 SMD. Paper tape on manufactures 7" reel. New parts. Note: Package of 50. Learn More

Inductor. 330uH 0.06Amp 5.6MHz. Case: SMD J bend connections. New. Package of 10. Learn More

Inductor, choke. Snap-on ferrite choke. Dimensions: Assembly 1.650" D x 1.9" high (max) New. Learn More

Inductor, ferrite. 1.5uH 545mA 420mOhm. Tolerance: 10%. Shielded. Case: tiny SMD. Note: Made in the USA. Package of 10. Learn More

JOHANSON TECHNOLOGY - L805 Inductors, choke.

Johanson Technology’s engineering prototype kits provide RF designers with a broad selection of high frequency ceramic components. Each kit contains a selection of components as well as the latest product data on Johanson’s full line of “High Frequency Ceramic Solutions”.

Proto Kit, high frequency ceramic chip, 500pcs 0805 SMD per kit = 20 vials of 25pcs each. Includes: 25ea : 1.5nH +/- 0.3nH - 1.8nH +/- 0.3nH - 2.2nH +/- 0.3nH - 2.7nH +/- 0.3nH - 3.3nH +/- 0.3nH - 3.9nH +/- 0.3nH - 4.7nH +/- 0.3nH - 5.6nH +/- 0.3nH - 6.8nH +/- 5% - 8.2nH +/- 5% - 10nH +/- 5% - 22nH +/- 5% - 33nH +/- 5% - 47nH +/- 5% - 82nH +/- 5% - 100nH +/- 10% - 150nH +/- 10% - 220nH +/- 10% -330nH +/- 10% - 470nH +/- 10%.

Learn More

Inductor, high frequency. 2nH +/-0.3nH. DC resistance: 0.09 Ohm max. DC current: 1000mA. Self-resonant freq: 13GHz. Q-Factor: 12. Package: SMD 0805. Learn More

TDK - ACL3225S-102M-TL Inductors, Coils.

1 ELEMENT, 0.13uH, AIR-CORE, GENERAL PURPOSE INDUCTOR, SM

Status: Discontinued

0.01uH 752mA

20%

.19-Ohm Power Line Inductors.

Magnetically shielded SMD.

Package of 10.

From factory new reels of 5Kpcs.

Learn More

COILCRAFT - 132-04L Inductor, Coil.

These fixed RF coils are part of Coilcraft’s series of insert molded inductors. This precision construction technique
ensures constant winding pitch, long-term stability and tight inductance tolerance (±5%).

37.5nH. 4.7mOhm.

4Amp.

Color: Yellow.

More info: http://www.coilcraft.com/pdf_viewer/showpdf.cfm?f=pdf_store:132.pdf

Learn More

MICROMETALS - T157-8/90 Toroids.

The T157-8/90 Toroidal core from Micrometals is a size Toroidal core manufactured from Micrometal's unique blend 8/90 material. and can be clearly identified by the cores' Yellow/Red color.

Powdered Iron Core

AL= 42 (nH/N2) +/- 10%

Initial Permeability = 35u

Package: 40.2mm OD x 24mm ID x 14.7mm thick.

Color: yellow with red.

From: 240pc / box.

Genuine MicroMetals product

Recommended uses: Line filters, Power conversion

Additional Information: http://c1170156.r56.cf3.rackcdn.com/UK_MIS_PC_Series_Issue_L_DS.pdf

Learn More

Micrometals - T131-18 Inductor, Core.

The T131-18 from Micrometals is a size 131 Toroid core manufactured from Micrometal's unique blend 18 material. This material has low core loss similar to the -8 Material with higher permeability and a lower cost. Good DC saturation characteristics. Material reference permeability (µo) is typically 55 and can be clearly identified by the core's Green/Red color.

79 Al nH/N(2).

Dimensions: 1.300" (33.0mm) OD x 0.437" (11.1mm) high with 0.780" (19.8mm) ID.

Color: Green/Red.

Powdered iron core.

Genuine MicroMetals product

Recommended uses: Line filters, Power conversion

Additional Information: http://c1170156.r56.cf3.rackcdn.com/UK_MIS_PC_Series_Issue_L_DS.pdf

Learn More

MICROMETALS - T200-26B - Inductors, RF Toroids.

The T200-26B from Micrometals is a size 200 Toroid core manufactured from Micrometal's unique blend 26 material. The most popular material. It is a cost effective general purpose material that is useful in a wide variety of power conversion and line filter applications. Material reference permeability (µo) is typically 75 and can be clearly identified by the core's Yellow/White colour.

Material: 26AI (nh/T2): 160

Le (mm): 130

Ae (mm2): 231

92.0 nH/N2.

Dimensions: 2.000"/50.8mm OD, 1.250/31.8 ID, 0.550/14.0 height.

Magnetic dimensions: 13.0cm, 1.27cm2, 16.4cm3.

Color: Yellow/White.

More info: http://c1170156.r56.cf3.rackcdn.com/UK_MIS_PC_Series_Issue_L_DS.pdf

Learn More

Bourns - J.W.MILLER - 9230-94 - Inductor, coil. RF 0.1uH Inductor, coil.

Formerly J.W. Miller model - High Q value

RF 0.1uH (100nH) 1100m

Current 1.1A

Phenolic Core

Q @ Frequency: 40 @ 25MHz.

Frequency - Self Resonant: 69- MHz

DC resistance: 70 mOhm Max.

Tolerance: 10%.

Package: Molded, Axial Leads.

Applications: EMI filter

Note: ALT P/N: 07723.

More info: http://www.bourns.com/data/global/pdfs/9230_series.pdf

Learn More

COILCRAFT - 132-11SMJ Inductor.

Maxi Spring Air Core.

130nH 3Amp. 11 Turns.

Tolerance: 5%.

DCR:25mOhm.

Package: SMD.

More info: http://www.coilcraft.com/pdf_viewer/showpdf.cfm?f=pdf_store:maxi.pdf Rohs compliant.

Learn More

Inductor. Type 103A-51. Tuning range: 30 - 50 Mc. L=0.25uH. C= 5.5uF. Q=225 approximately. Housing: metal can 3" D x 3" high. Manufactures date 1970. Used, very good condition. Learn More

Inductor, choke. coil. 0.33uH (330nH) 1.69 Amp. Tolerance: 20%. DC Resistance: 700m Ohm. Material: Phenolic core. Mount: through hole. Package: RF varnished, axial leads. More info: http://www.bourns.com/data/global/pdfs/70f_series.pdf Learn More

Inductor. 333nH 3.0Amp. 15-1/2 Turns. PCB mount. More info: http://www.coilcraft.com/132.cfm Learn More

TOKO AMERICA - E526HNSA-100059 Inductor, coil.

Status: Discontinued

375nH, Adjustable.

Type MC120.

Mount: PCB thru Hole. New.

Learn More