Ferrite & Toroid Core
Items 1-24 of 97
- Murata - DST310 55Y5S222M100 - EMI/RFI Suppression Filter Disc 2200pF w/Ferrite Beads 100V.Special Price $1.19 Regular Price $1.49 As low as $0.49IN STOCK - MORE THAN 5,000 READY TO SHIP!
Murata - DST310 55Y5S222M100 - EMI/RFI Suppression DST310 Series Filter.
Based on more than 30 years of ceramic and ferrite technology experience, Murata Electronics’ full range of leaded EMI filters have been designed to meet today’s electronic industry requirements. Murata’s leaded devices consist of ferrite bead inductors, feed-thru capacitors, 3 terminal capacitors, varistor/capacitors common mode chokes and block filters.
DST310 are T-type EMI suppression filters. The disc-type EMIFIL increases the self-resonant frequency of the capacitor by attaching two lead wires to one of the electrodes of the capacitor and increases the insertion loss by adding inductance to the lead in the DST and DSS types only. Frequencies to be suppressed can be selected by choosing the capacitance. They are also recommended for use as by-pass capacitors.
Effective Frequency: .8 to 12000 MHz
Working Voltage: 100V.
Temperature: -25C to 85C
Package: Through Hole Disc, Radial Leads.
External Ferrite Beads
New Old Stock - Rare - Difficult Component to FindLearn More
- MURATA - BLM21BD102SN1D - Ferrite bead. 1K Ohm 200mA. Package of 25.$3.00EMI Suppression Filters. Chip ferrite bead. Impedance: 1000 Ohm 200mA. DC Resistance: 0.4 Ohm. Package: SMD 0805. Package of 25. Note: For high speed signal. Learn More
- Murata - BLM21A10PTM00-03 - Inductor, ferrite bead. 1 Ohm. Package of 25.$3.00Inductor, ferrite bead. EMI Suppression Filters. Impedance: 1 Ohm. Package: SMD 0805. Package of 25. Note: For power lines. Learn More
- Murata - BLM21AJ601SPT - Inductor, ferrite bead. 600 Ohm. Package of 50.$3.00Inductor, ferrite bead. EMI suppression filter. 600 Ohm 200mA 25%. DC Resistance: 1.1 Ohm. Case: 0805 SMD. Paper tape on manufactures 7" reel. New parts. Note: Package of 50. Learn More
- Lucent - ED5D832-70 G1A - Inductor, choke. Snap-on ferrite choke.$5.00Inductor, choke. Snap-on ferrite choke. Dimensions: Assembly 1.650" D x 1.9" high (max) New. Learn More
- API Delevan - S1008-152K - Inductor, ferrite. 1.5uH 545mA 420mOhm.Package of 10.$3.00Inductor, ferrite. 1.5uH 545mA 420mOhm. Tolerance: 10%. Shielded. Case: tiny SMD. Note: Made in the USA. Package of 10. Learn More
- MICROMETALS - T157-8/90 - Powdered Iron Core 1.57 x 0.95 x 0.57", AL= 42 (nH/N2) +/- 10%Special Price $3.98 Regular Price $5.00 As low as $1.98
MICROMETALS - T157-8/90 Toroids.
The T157-8/90 Toroidal core from Micrometals is a size Toroidal core manufactured from Micrometal's unique blend 8/90 material. and can be clearly identified by the cores' Yellow/Red color.
Powdered Iron Core
AL= 42 (nH/N2) +/- 10%
Initial Permeability = 35u
Package: 40.2mm OD x 24mm ID x 14.7mm thick.
Color: yellow with red.
From: 240pc / box.
Genuine MicroMetals product
Recommended uses: Line filters, Power conversion
Additional Information: http://c1170156.r56.cf3.rackcdn.com/UK_MIS_PC_Series_Issue_L_DS.pdfLearn More
- MICROMETALS - T200-26B - Inductors, RF toroids. 2".Special Price $8.98 Regular Price $13.50 As low as $6.98
MICROMETALS - T200-26B - Inductors, RF Toroids.
The T200-26B from Micrometals is a size 200 Toroid core manufactured from Micrometal's unique blend 26 material. The most popular material. It is a cost effective general purpose material that is useful in a wide variety of power conversion and line filter applications. Material reference permeability (µo) is typically 75 and can be clearly identified by the core's Yellow/White colour.
Material: 26AI (nh/T2): 160
Le (mm): 130
Ae (mm2): 231
Dimensions: 2.000"/50.8mm OD, 1.250/31.8 ID, 0.550/14.0 height.
Magnetic dimensions: 13.0cm, 1.27cm2, 16.4cm3.
More info: http://c1170156.r56.cf3.rackcdn.com/UK_MIS_PC_Series_Issue_L_DS.pdfLearn More
- HURRICANE ELECTRIC - HL20374/AA - Inductor, toroid. 375uH.$10.00Inductor, toroid. 375uH. Mount: PCB or Panel, vertical. Dimensions: 1.2" OD x 0.761" wide, with an approximate ID of 0.404". Note: More info: http://www.hurricaneelectronics.com/classicSeriesData.php Learn More
- J.W.MILLER - PM127SH-6R1N-RC - Inductors, ferrite. Inductance: 6.1uH.$1.00Inductors, ferrite. Inductance: 6.1uH. Maximum Current: 6.6Amp. Tolerance: +40, -20%. Series: PM127SH. DC resistance: 0.018-ohm. Package: SMD. Dimensions: 0.48"square x 0.3"H. JW Miller Magnetics/Bourns. Learn More
- Murata Erie - LQH3N6R8M04M00 - Inductor, ferrite. 6.8uH 0.24Amp. Package of 4.$3.00Inductor, ferrite. Inductance: 6.8uH. Tolerance: 20%. DC Resistance: 1.5 Ohm. Current: 0.24Amp. Package: 1212 SMD. T/R. Note: Operating temperature: 85 Deg C. Package of 4. Learn More
- MAGNETICS / SPANG - 0F-45528-EC - Pair of High quality large ferrite "E"$6.95Inductor, ferrite. High quality large ferrite "E". Inductance: AL value 8220nH (+/-25%) @10kHz. Eff.:353Ae Sq mm - Ve 44,000 mm-cubed - Core Loss Pi max: 205mW/cm3 (9W/set)@25kHz 299mT 100C - EC, ER, ETD and EER shapes are a cross between E cores and pot cores. 54.8mm wide x 20.8mm deep x 28.2mm tall.http://specs.mag-inc.com/Ferrite/0F-45528-EC.pdf Learn More
- RadioShack - 273-104 - Snap-On Ferrite Toroid RF Choke Core, Two (2) Cores in Package.Special Price $5.98 Regular Price $8.50 As low as $4.49IN STOCK - MORE THAN 500 READY TO SHIP!
RadioShack - 273-104 - Snap-On Ferrite Toroid RF Choke Cores, Two (2) Cores in Package.
Reduce or eliminate on RFI (radio frequency interference) with this snap-together Toroid Choke Core. Effective "Roadblock" to Radio Frequency Interference. Easily use choke core on a phone, computer, AC, audio and coax cables. No cable cutting necessary - you simply wind it through the core.
Fast 'n Easy Solutions to RFI Problems
Helps reduce RFI (Radio Frequency Interference). Use on Phone, Computer, Keyboard, AC, Audio and Coax Cables.
Use as close to the equipment as possible, wrapping the cord through the center of the coil until the core is filled. All turns must be wound in the same direction to avoid cancelling the effects of the core.
No need to cut cable - Simply wind it through the core and snap together.
Ferrite Split Core Chokes (Two per package)
Effective to 500 MHz.
Approximate Overall Dimensions: 1.62" X 1.125" X 0.396"
Opening: 0.885" X 0.380" (7/8" X 3/8")
Includes Detailed Instructions on Theory and Installation.
Note: Some customer report using as a step up Transformer by winding primary and secondary coils driven at 60 Hz.
Additional Interference Information:
Equivalent Part Numbers: 2730104, 273-0104, 273-104Learn More
- COILCRAFT - LPO6013-103KLC - Inductor, Ferrite. 10uH 1Amp. SMD.Special Price $0.98 Regular Price $1.19 As low as $0.59
COILCRAFT - LPO6013-103KLC Inductor, Ferrite.
DCR: 0.30 Ohm.
Dimensions: only 1.3 mm high.
RoHS compliant.Learn More
- COILCRAFT - DO1605T-103MLC - Inductor, ferrite. 10uH 0.9Amp. Package of 10.$4.99Inductor, ferrite. 10uH 0.9Amp. DCR:0.27 Ohm. Package: SMD, low profile, 1.8mm high. Rohs compliant. Package of 10. Learn More
- Eaton Coiltronics Cooper- UP4B-150 - Inductor, Ferrite Core. 15uH 5.5Amp.Special Price $1.98 Regular Price $2.50 As low as $0.98
Eaton Coiltronics Cooper - UP4B-150 Inductor, Ferrite Core.
Current: 3.7 Amp.
rom: Manufactures T/R.
Rohs compliant.Learn More
- COILCRAFT - LPS4018-153MLC - Inductor, ferrite. 15uH. SMD.$0.59Inductor, ferrite. Inductance: 15uH. Tolerance: 20%. DCR: 0.26 Ohm. Shielded. Package: SMD, 4.0 � 4.0 mm footprint; less than 1.8 mm tall. More info: http://www.coilcraft.com/pdf_viewer/showpdf.cfm?f=pdf_store:lps4018.pdf Learn More
- COILCRAFT - 0805LS-153XGLC - Inductor, ferrite. 15uH 0.18Amp. Package of 10.$4.00Inductor, ferrite. 15uH @ 2.5MHZ, 0.18Amp. Tolerance: 2%. Package: 0805 SMD. Rohs compliant. Package of 10. Learn More
- TALEMA - SWS-3.00-17 - Inductor, toroidal. 17uH 3Amp 150KHz.$2.00Inductor, toroidal. 17uH 3Amp 150KHz. Tolerance: 20%. Package: SMD, unshielded. Dimension: 0.591" long x 0.591" wide x 0.315" high (15.00mm x 15.00mm x 8.00mm). Lead free. Rohs compliant. Learn More
- RENCO - 602920-9A - Inductor, coil. 26uH.$0.50Inductor, coil. 26uH. Double wound onto a ferrite core, 30 turns #14 magnet wire. Heat-shrunk insulation, two terminals. Dimensions: 0.25" D x 1.25" long. NO-measurable-OHMS. Made for Reliance Electric. Learn More
- Eaton Coiltronics Cooper - UP4B-330-R - Inductor, Ferrite Core. 33uH 3.7 Amp.Special Price $1.98 Regular Price $2.50 As low as $0.98Out of stock
Eaton Coiltronics Cooper - UP4B-330-R Inductor, Ferrite Core.
Current: 3.7 Amp.
From: Manufactures T/R.
Rohs compliant.Learn More
- GOWANDA - 050AT5002HLF - Inductor, Coil. 50uH 3.9Amp.Special Price $5.98 Regular Price $6.95 As low as $4.98
GOWANDA - 050AT5002HLF Inductor, Coil.
Radial Leaded Horizontal Mount Toroidal Choke
Inductance: 50000 nH (50uh)
Current Rating: 3.93Amp. (3950 mA)
Resistance DCR: 0.035 Ohm.
Dimensions: 15.6mm D x 7.5mm high.
Lead spacing: 15.0mm.
Note: Toroidal power inductor chokes.
Genuine Gowanda - Rae - Difficult Toroidal Inductor to find.
- RC Bourns - 9250-563 - Inductor, coil. Inductance: 56uH.$3.32Inductor, coil. Inductance: 56uH. Current: 190mA. Tolerance: 10%. Ferrite. Technology: wirewound. Case: axial leads. New. Learn More
- TDK - MLF2012C101K - Inductor, ferrite. 100uH 2mA. Package of 20.$3.00Inductor, ferrite. 100uH 2mA. Tolerance: 10%. Shielded. Q @ Freq 25 @ 1MHz. Frequency - Self Resonant: 12MHz. DCR: 3.1 Ohm. Package: SMD 0805 (2012 Metric). Lead free. Rohs compliant. Package of 20. Learn More