Ferrite & Toroid Core
- STEWARD FERRITES - 39G3449 - Inductor, Toroid Ferrite Core. OD: 22.1mm.
STEWARD FERRITES - 39G3449 - Inductor, Toroid Ferrite Core.
OD: 22.1mm, ID: 13.5mm x 6.3mm Thick.
Color: Grey.
Note: Steward is now Laird Technologies
Learn More - STEWARD - 28BOASM-KIT - Inductor. EMI suppression ferrite kit.Special Price $41.95 Regular Price $50.00READY TO SHIP - ONLY 2 LEFT IN STOCK!
Inductor. EMI suppression ferrite test & design kit. Note: Possibly a complete full kit.
Learn More - STACO - 829-0088 - 50VA Universal Toroid Core, Open Frame.Special Price $29.98 Regular Price $48.50READY TO SHIP - ONLY 48 LEFT IN STOCK!
STACO - 829-0088 Universal Toroid Core, Transformer. 50VA, Open Frame.
Primary is 550 turns of #29 enameled copper wire wound around a 2.8" OD 1.5" high, tape wound, iron core.
120VAC Pri windings. PriRes=23-Ohms.
Spec sheet #155 available.
Similar to GenRad's old Variac or Superior's Powerstat.
Learn More - PREM - 855A03 - Inductor, Coil. Tuneable, with Dial.Special Price $1.98 Regular Price $3.00IN STOCK - MORE THAN 100 READY TO SHIP!
PREM - 855A03 - Inductor, coil. Tuneable, with Dial.
Mount: 3 Pin PCB.
Dimensions: Overall 7/8" x 7/8" x 1-3/16" high.
Learn More -
- Murata Products - BLM21P221SGPT - Ferrite bead. 220 Ohm 2Amp. Package of 25.$3.00EMI Suppression Filters. Chip ferrite bead. Impedance: 220 Ohm 2Amp. Package: SMD 0805. Note: Manufactures 7" reel is double marked BLM21P221SGPTM00-03. Package of 25. Learn More
- Murata Erie - BNX002-01 - Inductor, ferrite. Set in a 4 Dip PCB mt.Special Price $2.96 Regular Price $3.95Inductor, ferrite. Set in a 4 Dip PCB mount housing. Dimensions: 0.472" wide x 0.440" deep x 0.486" high. Learn More
- MICROMETALS - T130-0 - Inductors, RF toroids. Iron Powder Cores., AL= 1.5 (nH/N2) +/- 10%Special Price $3.98 Regular Price $5.00
MICROMETALS - T130-0 Inductors, RF toroids.
Iron Powder Cores.
AL= 1.5 (nH/N2) +/- 10%
Material: Phenolic
OD = 1.30 / 33.0 mm +/- 0.02 in
ID = 0.780 in / 19.8 mm +/- 0.02 in Ht = 0.437 in / 11.1 mm +/- 0.025 in AL= 1.5 +/-5%
50 MHz - 350 MHz
Genuine MicroMetals product
Recommended uses: Line filters, Power conversion
Additional Information: http://c1170156.r56.cf3.rackcdn.com/UK_MIS_PC_Series_Issue_L_DS.pdf
Learn More - MICROMETALS - T106-0 - Inductors, RF Phenolic Toroids. AL=1.9 +/- 5 %.Special Price $3.98 Regular Price $5.00
MICROMETALS - T106-0 Inductors, RF toroids.
AL=1.9 +/- 5 %
RF Phenolic Toroid
Dimensions: 1.06" OD x 0.437" high, with 0.57" ID and 0.260" thick walls.
Genuine MicroMetals product
Recommended uses: Line filters, Power conversion
Additional Information: http://c1170156.r56.cf3.rackcdn.com/UK_MIS_PC_Series_Issue_L_DS.pdf
Learn More - MAGNETICS - 0R44949-EC - Inductor, ferrite. "E".$4.00Inductor, ferrite. "E". Dimensions: 0.986" (25mm) wide x 0.649" (16.5mm) deep x 1.916" (48.6mm) high. Top of ferrite and lower sections are only 0.306" (7.7mm) high. Each with an inside curve toward the center. Center scection of ferrite is round 0.653" (16.5mm) D. Note: Sold one @ $4.00 USD. Learn More
- ISKRA FERITI - FP15G100 51-00 - Ferrite Rods. 10mm D x 50.8mm long. Amateur & Crystal Radio.IN STOCK - MORE THAN 1,000 READY TO SHIP!
ISKRA FERITI - FP15G100 51-00 - Ferrite Rod. Perfect for Amateur and Crystal Radio.
The Iskra Feriti (Iskra Ferrites) company has more than 40 years’ experience in the production of ferrite materials and products.
Ferrite Rods, Bars, Plates and Tubes. Ferrite rods, bars, slugs, plates and tubes are primarily used as magnetic cores in radio antennas, chokes, inductors and filters. In radio antennas, ferrite rods are useful from VLF spectrum to VHF spectrum. The advantages are small size, high Q and compactness. They are used for their properties of high magnetic permeability coupled with low electrical conductivity (which helps prevent eddy currents).
Ferrite Rod Core is a cylindrical ferrite core, can be easily assembly with a spring coil or wind wire directly. It's widely used for radio antenna, LF/HF RFID antenna, choke coil, inductor, DC power filter, DC signal filter and transformer. Due to the open magnetic structure, the core can accept large DC bias before saturate. The rods are design to use for MW and shortwave antenna coils; in high frequency applications they have low loss characteristics.
Large ferrite rod made for radio "Loopsticks"
Authentic Vintage Iskra Ferite - New Old Stock
Dimensions: 10mm D x 50.8mm long. (0.394" X 1.969")
Additional Information: http://www.holmmagnetics.dk/html/kurver.html
Learn More - Hurricane Electronics Lab - HL-8189 - Inductor, coil. Toroid. 30uH, 0.019 Ohm.$3.00Inductor, coil. Toroid. Value: 30uH. DCR Ohm: 0.019. Mount: PCB, vertical. Case: radial leads. Dimensions; 0.810" D x 0.349" wide. New. More info: http://www.hurricaneelectronics.com/filterInductor.php Learn More
- FERROXCUBE - 3019PL00-3C8 - Ferrite, pot core 30mm long. Package of 2.
FERROXCUBE - 3019PL00-3C8 - Ferrite, Pot Core, Uncoated.
Dimensions: 9.4mm D round x 30mm long with center hole.
Color: Gray.
Cross: 1102-00665-028.
Package of 2.
Learn More - FERROXCUBE - K3000 62 3B3 - Pot Cores 1" OD set of Two$1.50FERRITE 1" OD POT CORE - Set of Two - New Each 0.315"high Learn More
- FAIR-RITE - 0443164051 - Filters, Ferrite. Ribbon Cable Line Filters, 2.5".
FAIR-RITE - 0443164051 - Filters, Ferrite.
Ribbon Cable Line Filters.
Split bead and housing assemblies.
Dimensions: 2.5" wide x 1.11" x 0.65" when closed.
Heavy Duty.
Learn More - Laird - DM STEWARD - STE28S0670-000 - 28S0670-000 - Split Core Ferrite Suppressors for Flat Cables, 150 Ohms, 100 MHzIN STOCK - MORE THAN 500 READY TO SHIP!
Laird - DM STEWARD - STE28S0670-000 - 28S0670-000 - Ferrite.
One Piece Split Core Ferrite Suppressors for Flat Cable 150ohms 100MHz 12.5mm Inside Slot
Impedance: 60 Ohms @ 25 MHz, 150 Ohms @ 100MHz, 310 Ohms @ 300 MHz
Core Material: 28
Operating Temperature: -40 C to 125 C
Has two rounded edges on opposite side which are 0.095" wide x 0.59" deep x 0.13" tall.
Dimensions: Inside Length: 12.5 mm, Outside Length: 17.02 mm, Outside Width: 14.99 mm, Inside Height: 0.51 mm, Outside Height: 3.4 mm
Laird Technologies Acquires Steward, Inc. and Its Subsidiaries in 2006
Newark P/N 32AC5311
New Old Stock
Made in USA
Learn More - Elna - 1107PA160-3B7 - Ferrite, core. Pot core. Set of 2.$1.50Ferrite, core. Pot core. Gapped. Dimensions: 11.1mm D x 3.4mm high. Set of 2. Learn More
- BH ELECTRONICS - 5-328 - Inductors, ferrite. Coil form on a board.$1.50Inductors, ferrite. Coil form on a board. Learn More
- Amidon - FB73-2401 - Ferrite Beads - 9.6mm Round$0.39 As low as $0.33READY TO SHIP - ONLY 50 LEFT IN STOCK!
Amidon FB73-2401 - Ferrite Beads - 9.6mm Round
- Amidon Ferrite Shielding Bead
- EMI/RFI Supression Bead, Ferrite Bead
Dimensions: 9.6mm round x 4.9mm high with a 4.8mm id. (OD 0.38, ID 0.197, HT 0.19)
Permeability 2500
AL @ 10KHz (nH/N2) 1585 (Reference Only)
Ae (cm2) 0.11
Le (cm) 2.15
Frequency Typical Impediance
1MHz 8 Ohm
5 MHz 20 Ohm
10 MHz 20 Ohm
25 MHz 15 Ohm
https://www.amidoncorp.com
Learn More - ACME - 7-140-1 - Inductor, core. Toroid. Package of 10.$3.00Inductor, core. Toroid 0.378" (9.6mm) OD, 4.7mm ID x 3.6mm thick. With two tiny windings of 5 turns each. Over one inch long leads. ACME of Japan. Package of 10. Learn More
- !@ - 9-319 - TOROIDSpecial Price $3.71 Regular Price $4.95TOROID #12 WIRE WOUND ON A 1.5" SQUARE x 1"THICK COIL FORM. Learn More
- STEWARD - HI1206T161R-10 - Inductor, ferrite. 160 Ohm 6Amp. Package of 10.$1.50Inductor, ferrite bead/chip. Impedance: 160 Ohm. DC Current: 6000mA. DC Resistance: 0.018 Ohm. Package: 1206 (3216 metric) SMD. Operating temperature: -55 to 125 Deg C. Test frequency: 100MHz. Note: Steward/Laird Technologies. Package of 10. Learn More
- MURATA - BLM31B601SPT - Inductor, ferrite. 600 Ohm. Package of 10.$1.00Inductor, ferrite. 600 Ohm at 100MHz. DCR ohm: 0.9 Ohm. Current: 200mA. Package: 1206 bead/chip SMD. Package of 10. Learn More
- MURATA - BLM31AF700SN1L - Inductor, ferrite. 70 Ohm. Package of 10.$1.00Inductor, ferrite. 70 Ohm at 100MHz. DCR ohm: 0.15 Ohm. Current: 200mA. Package: 1206 bead/chip SMD. Package of 10. Learn More