DC Fans

Comair Rotron -  032942 - ST12B3QDNX - Fans, Axial.

Sprint 12VDC 0.28 Amp, 3.4 watt (Operates with 6 to14 VDC) 

3400RPM, 34CFM.

Plastic blades & housing, ball bearings.

Noise 41dB 

Connections: Red + Positive, Black - Minus, Blue Stall

PTC and Polarity Protected - 10sec. Delay from stall until output goes Low

Dimensions: (80 x 32mm).

Fan Stall Output: Open Collector (Requires Pull-Up Resistor) 15mA max Sinking

OverallDimensions: 3.15" x 3.15" x 1.3".

3.15" (80mm) square with four 6-32 threaded inserts on strut side at 2.81"centers.

Weight: 0.45 lb

Newark Stock No. 91B3081

UL, CSA Listed

 

Learn More

Delta Electronics - EFB1548XHG - 5L58 -48VDC 1.65A DC Brushless Tubeaxial Cooling Fan

Rectangular/Rounded 150mm x 172mm x 50mm, (5.9" x 5.7" X 2")

Operating voltage 48 VDC (24 to 60 VDC)

Operating speed 6000/6500 RPM 

Operating Temperature -10C to +70C

Bearing Type - Ball Bearing Permanently Lubricated

Material -- Housing Die Cast Aluminum, Impeller Thermoplastic, Air Flow at 0 in (mm) H2O 415 CFM (11.75 M3/min)

Noise Level 74.5 dBa

Solid State Brushless DC Motor

Polarity & Lock rotor Protected

Tachometer - Open Collector 28VMax. 2 Pulse/Rev. 

Tachometer Output 5Ma Max VCE 0.5V Max

Lead Wires: - UL 1007 AWG #24 OR Equivalent

Red Wire Positive (+) Black Wire Negative (-)

UL Certified, CSA, TUV or VDE, RoHs Compliant 

EFB Series fans are low air resistant fans featuring over 25mm thickness for a 3-blade design. This standard DC axial fan has a maintenance-free ball bearing system and plastic impeller and aluminum frame.

Slightly Used in Excellent condition.

Made in Thailand

Learn More

SHICOH IC FAN - 0610-12 -  0610-12HHV - 12VDC 2 Wire Brushless Fan, Axial.

In Japanese Shicoh means “thinking” it is the working philosophy of everyone at Shicoh Engineering.

12VDC 0.15A. (230mW) 3.5".

Termination: 2 Wire,  22 AWG Female Connector

11 Plastic Blade Ultra Quiet Server Square Fan.

Brushless Ball Bearing Motor

4 hole 2" Spacing.

Overall Dimensions: 2.35" x 2.35" X 0.425". (60mm X 60mm X 10.3mm)

Opening: 2.3".

Mounting: 4 Hole 2" (50mm) Spacing

Weight: 0.9 oz.

Silent at 6VDC, Lots of air Flow at 12VDC

Air Flow @ 12VDC: 12.7 CFM (m3/min)

RPM: 3300

Very Thin, Silent on 6V, Lots of Air at 12V.

Number Fan Blades: 11

Material-Venturi / Propeller: UL94V-0 Plastic

Static Pressure (Max): 12.7 / 0.33(m3/min) 

Noise: 16.7 (dBA)

Weight: 0.9 Ounce

Life Expectancy-MTBF: 50,000 Hours @ 25C

Applications: Computer/Server/IC/CPU Cooling

Quality Made in Japan prior to current product line transfer to China.

New Old Stock.

Approval: UL/CSA

Alternates: Dynatron F6010AP-12LCWDF126010BL, Quick Cool E232190, F6010AP-12LCW 

 

Learn More

MATSUSHITA - Panaflo - FBH-09A24LB  Fan, axial. 24VDC 0.10A, DC Brushless.

Dimensions: 3.6" square x 1" deep.

4.5" mount diagonal - 4 hole.

7 plastic blades.

2 wire leads.

Double marked 7BO5D4-B.

Weight: 5 oz.

Learn More

Globe - D47-B10B-04W49-00 Fan, axial.

Power: 12VDC 0.44amp, 3.6 Watt

Air flow: 88 CFM.

Ball bearing.

Material: Plastic.

Dimensions: 1" x 4.7" square (120mm x 120mm x 26mm), 7 blades.

Weight: 6 oz (218.291g)

Used/Removed from equipment.

 

Learn More

GLOBE - D47-B10A-04W2-000 Fan, Axial.

Power Input: 12VDC 0.20A. (Range: 6.0 - 13.8 VDC)

Termination/Connections: 2 Wire Leads.

Speed: 2200 RPM.

Air Flow: 80 CFM.

Lifetime Lubricated Ball Bearing.

Construction: Reinforced Polybutylene

UL-94V.

4 Mounting holes 4.13" spacing.

Dimeensions: 4.69" x 1". (120mm X 120mm X 25mm)

Opening: 4.2".

Weight: 7 oz.

Electronic locked rotor and polarity protected some leads may be short.

Made in Thailand

Life Expectancy: >75,000 Hours

Note: Used/Removed from Equipment - Sell New $26

Approvals: UL CSA VDE CE

Learn More

GLOBE - D24-B10A-04W3-000 Fan, Axial. 

Features:

• Solid State Brushless Motor Design Provides:
  - Improved Performance
  - High Efficiency
  - Auto Restart
  - Low Input Power
  - Lower Operating Voltages
• Precision Ball Bearing System Provides:
  - Longer Life
  - Higher Temperature Extremes
  - Lower Noise Over Time
  - Maximum Shock and Vibration Resistance
• Designed to Meet the Rigid Standards of UL, CSA, VDE, and CE
• Electronic Locked Rotor Protection
• 12VDC 0.13Amp, 3600 RPM, 17CFM, 1.44 Watt.
• Efficient extra low current draw.
• Low noise, ball bearing, 28dBA.
• Dimensions: 2.36" x 2.36"x 1" (60mm X 60mm x 25mm),
• Maximum Operating Temperature 70C
• Minimum Operating Temperature -10C
• Rotation CW
• 2.3 Oz.
• 5 blade. Material: Plastic. 2 Wire leads.
• RoHS Compliant

Used/RFE.

 

 

Learn More

COMAIR ROTRON - MC12B7X - 12VDC Muffin Fan 0.66Amp

Voltage Range: 6 VDC to 14 VDC

Power: 7.9Watt

Nominal Speed: 3700 RPM

Airflow: 102 CFM

PTC & Polarity Protected

Three (3) wire - The 3rd is a 5 Volt TTL Tachometer Output - Two Pulses per Revolution

Blades: 5-Blade Plastic

Dimensions: 4.72" Square X 1.26"  (120mm x 120mm X 30mm)

Mounting Holes  4.125" Square

Weight: 0.85 Pounds

Excellent Condition - Lightly Used - Removed from Equipment.

Alternate: 031414

Note: Newer Production Comair Rotron Fans are inferior and made in China.

 

Learn More

NIDEC-TORIN - TA225DC - A31390-10 Fan, Axial.

Input Power: 12VDC 0.08A. 2 Wire/Pin.

Speed: 2600 RPM.

Air Flow:12 CFM.

Construction: 9 plastic blades metal frame.

Mounting: 2 hole 2.78" spacing.

Dimensions: 2.37" x 2.71" x 0.8".

Opening: 2.25".

Ball Bearings.

Weight: 3.6 oz.

Terminals Out Top, Solder or Small Quick Connect

Model A31390-10.

Made in Japan

Learn More

NMB Minebea - 2410ML-04W-B20 Micro Boxer Axial Fan 

Auto restart/Polarity Protection

3600 RPM

12VDC 0.16A,

16.9 CFM,

Ball Bearing construction

7 plastic blades, 4 hole 2" spacing.

Dimensions: 2.36" x 1", 2 wire.

Operating Temperature -10C to +70C

Opening: 2.25".

Weight: 2.2 oz.

Low noise, 28 dB

Used/Removed from equipment, some may have short 1" leads. 

Made in Thailand

Learn More

COMAIR ROTRON - ST12G6X - 031504 - Fan, Axial, Sprint DC.

12VDC 0.12Amp 1.4 watt,

Airflow: 33 CFM.

Sprint DC.

Plastic 5 blades.

PTC & Polarity Protected

Mount: Panel 4 holes with 2.82" centers.

Dimensions: 80mm Square x 32mm wide.

Note: Alt P/N: 031504.

UL, CSA Listed 

Condition: LN Used/Removed from equipment.

Mixed length on lead wires. Some slightly dusty/dirty.

Weight 7 oz.

Learn More

Miniebea NMB - 4710NL-05W-B50 - 24 VDC Axial Fan, 119X119X25.5mm, Case/Server Cooling Fan 

Brand: NMB-Minibea DC Brushless Fan Motor

Dual Ball Bearing

Size: 120*120*25mm

Air Flow: 114.7 CFM

Speed: 2800 RPM   Noise: 41.3 dB

Power: 6.96 Watts

Operating Temperature: 14 to 140F (-10 to 60C)

Mean Time to Failure (MTTF): 180,000 hours

Rated voltage: 24 VDC - 2 Wire, 0.31 Amps

Approvals: CE, CSA, UL, VDE

Learn More

12VDC Fan 0.35A brushless (RFE/Used) mixed manuf JMC/DA-TECH 0825-12HBT, etc 3.155" (80.1mm) x 3.155" (80.1mm) x 0.982" (24.9mm) deep with one finger guard attached and a 3-cond 4" wire Learn More

TRW GLOBE - 19A2689 Fan, Axial. Xerox 127P1668 

A Vaneaxial fan consisting of a disk-type wheel within a cylinder with a set of air guide vanes. It has a higher efficiency than any other type of axial-flow fans and more expensive to manufacture.

24VDC.

Vaneaxial.

Dimensions: Round 2.620" D x 2.577" deep.

Mounts in hole with instrument-style flange front, four holes 2.111" apart, 3" centers.

Four plastic blade.

Two wire, 5" long with a 2 position Molex connector.

Made in USA

Learn More

COOLTRON - FD4010B12W7-81-2N Fan, Axial.

12VDC 130mA 2.16 watt, 9 blade.

Operating Voltage: 6.0 to 13.8 VDC

Ball Bearing.

Air Flow: 5.5 to 8.6 CFM.

Static Pressure: 3.7 (mmH20).

Noise: 28.60 dBA.

Material: Thermoplastic, PBT, UL 94V-0

Operation Temp: -20℃~70℃ (Humidity 15%-90%RH)

Storage Temp: -40℃~85℃ (Humidity 15%-90%RH)

Insulation Resistance: 10MΩ, 500VDC/min between bare wire and frame

Dielectric Strength: 5mA max. 500VAC/min between bare wire and frame

Dimensions: 1.6" square x 0.412" deep, (40 x 40mm x 10.5mm deep).

Mount: 4 hole, 1.77" (32.0mm) Centers. 

With 2 conductor #28 AWG wire leads.

Life Expectancy: 80,000 Hours @ 40C

Alternate: FD4010-81 Series

UL, CUL, TUL Approvals

Applications: Server and General Equiment Cooling

Additional information: http://www.cooltron.com/uploads/soft/20150811/1439267854.pdf

https://www.datasheetarchive.com/whats_new/669a1639db195bddfc0eef380b68db3d.html

http://www.cooltron.com/stockshow/pdf/FD4010B12W7-81-2N2.pdf

https://www.youtube.com/watch?v=fH_2Jjzqzxg

 

 

 

Learn More

Protechnic Magic - MGT8024HB-O25 - IP68 Waterproof Fan

DC Brushless Fan, Axial with Lock Rotor Protection.

28VDC 0.16 Amp. 3 Wire

Dual Ball Bearing

3000 RPM +/- 10%

Airflow: 41.34 CFM

Noise: 33.2dB (A), Max. 36.2 dB(A)

Life Expectancy: 70,000 hrs at continuous 40C 

Mount: 4 hole with 4" centers and 18" wire leads of which 8" is Watertight.

Housing material: Plastic with 7 plastic blades.

Dimensions: 80X80X25mm

Ingress Protection Rating: IP68 

Operating Temp. -10 to 70C, Storage Temp. -40 to 70C

 

Learn More

TOYO - TFDD8024RXA - Fan, Axial.

Supply Voltage: 24VDC

Supply Current:0.145 Amp.

DC Brushless, Ball Bearing.

Mount: 4 hole with 4" centers and (2) 10' wire leads.

Housing material: plastic with 7 plastic blades.

Dimensions: 3.17" Square x 0.91" (23.1mm) deep. (80 X 80 X 25 mm)

Note: Ball bearing.

Made in Japan

Learn More

Thermalloy/Aavid - 2325B-TCM45S - Heatsink with 5V Cooling Fan

Cooling performance approaches recirculating liquid

Dimensions: 2.1[53.5mm] x 2"[51mm] x 0.8"[20mm] high mount with epoxy

5VDC Cooling Modules for Microprocessors

5VDC Fan plastic 9-Blades with a 2x 6-Inch leads.

Factory New.

Learn More

EBM Papst - W2G076-BD01-13 - Fan, Axial, Ball Bearing.

Voltage:  12VDC

Nominal Voltage Rating: 6 -16 VDC

Power: 4.0 watt

Air Flow: 67 m3/h

Speed: 4200 RPM

Sound Power Level: 5.8B

Sound Pressure Level: 43

Numer of Blades:5 Blade

Construction Material: Glass-fiber reinforced PBT/PA Plastic.

Temperature: -20 C to 75 C

Connections: Quick Connect

Dimensions: 3.15" square x 1.26" deep (80mm x 32mm).

Service Life: 62500 Hours

Protection: IP54 / IP68

Approvals: VDE, CSA, UL, CE

Used/Removed from equipment.

EBM Papst.

Learn More

EG&G-ROTRON - SD24B1 - Fan, Axial.

Rotron DC fans feature outstanding airflow performance in high pressure systems and all include a permanent split capacitor motor. An extended ball bearing life ensures fault-free use for a significant period of time and ensures Rotron DC fans provide a flexible and dependable cooling solution.

24VDC 0.12Amp, 35CFM. 2 wire 12".

Metal housing, 7 plastic blades.

Mount: 4 hole 4" centers.

Dimensions: 80 x 80 x 38mm (3-1/4" square x 1-5/8" deep).

Ball bearing. DC Brushless.

Air Flow: 59m³/h (35CFM)

Noise Level: 47.6dB

Fan Speed: 3500rpm

Bearing Type: Ball

Polarity protected. Sprite.

Approvals: UL, CSA, TUV.

New Old Stock

Made in USA

Learn More

DC CENTAUR - CNDC24K4-601 Fans, Axial.

24VDC 11 Watt.

Brushless, Ball Bearing, 5 Plastic blade.

Dimensions: 120 x 39mm.

Bearng Type: Ball Bearing

Housing: Aluminum Cast.

Used/removed from Equipment.  Old Stock

Dimensions: Width: 1 in, Height: 4.7 in, Length: 4.7 in (36mm X 120 mm X 120Mm)

[Note: These fans have three wires, the Red and White wires connect to +24VDC, the Black wire connects to the negative side of the 24VDC source.

Made in Japan

Retail for $75

Learn More

Intel / Nidec - F07R-12B4S1 - Fan, Axial A50933-003.

3 Pin CPU Cooling Fan

Voltage/Current: 12VDC 0.17Amp.

Socket Compatibility: Socket 370

Fan DIameter: 75mm

Ball Bearing

Material: Thermoplastic

Color: Black

Plastic, 7 blade.

Complete with (unattached) heatsink 2.909" long x 2.525" wide x 1.003" high.

New in Blister Pack. 

Note: Double marked A50933-003 and 03AC1.

Applications: Pentium 3 and others.

Learn More

Comair Rotron - PD26H6VRDN Fan, Axial.

26VDC 1Amp.

Metal, 5 plastic blades.

Round 6-3/4" x 2" deep.

New.

Note: Double marked 032440.

Learn More

EBM PAPST - RG90-18/12N/19 - Fan, Radial Centrifical Blower.

EBM Papst Radial Fan, Blower. RG90DC Series

12VDC (7 - 15VDC Range) 580mA 7 watt. 32.4 CFM, 55db, Ball bearing.

Dimensions: 5-5/16" square x 1-1/2" deep (135mm x 135mm x 38mm).

Galvanised Sheet Steel Housing.

Operating Temerature --30 to 75C,

Oxidation on metal housing from damp storage. Excellent for spot cooling.

DC Radial blower with electronically commutated external rotor motor.

Electronic protection against reverse polarity, blocking and overloading by PTC-resistor, partially impediance protected.

Spiral housing and blower of fiberglass reinforced plastic. 

Radial air exhaust through housing port.

Electrical connection via 2 leads AWG22, TR64.

UL, CSA, VDE Approved, Rohs Compliant. 

Used/As Removed from Equipment.

Made in Germany

Learn More