Circuit Protection

BUSSMANN - HLQ-1-6/10 - Fuse Holder

Body Material: Thermoplastic

Mount: Through Hole

Current Rating: 1.6 A

Termination: Wire

Voltage Rating (AC): 300 V

300VAC or less HLQ carrier comes with a 6" lead of 18AWG red insul solid copper attached to the line side, non-threaded.

Learn More

EPCOS - S20K150E2 - B72220S2151K501 - SIOV Varistor, Metal Oxide.

150V RMS.

Round Varistor Element.

Maximum 150VAC.

Maximum 200VD.

Varistor Voltage: 240V.

Energy: 120 Joules.

Current Surge: 10kA.

Coating: Epoxy Resin, Flame-Retardant to 94 V-0.

Package: Disc Nominal 20mm D x 3.8mm thick x 21.1mm high with radial prepped leads 8.6mm long.

Lead spacing:11.2mm.

Alternate:JAN1N3996A

Note: Each has a Removable Heat Shrink Covering.

Learn More

General Electric - V18ZA3 - MOV, Metal Oxide Varistor.

A resistor specifically designed so that its ohms value decreases with increasing applied voltage over at least a portion of its rated ohmic range.

Voltage Rating: 10V RMS, 14VAC/VDC

Peak, 0.4 watt 3.5 Joules.

Mount: Through Hole

Temperature: -55 c to 85 C

Package: 14mm D, Radial Leads.

Alternate: V18ZA3P

NSN 5905-01-267-2306

Learn More

Circuit breaker. 3P 100A 400VAC. Rating plug type: SRPE100A. Mounted on a galvanized panel 5.7" wide. Dimensions: actual 4-1/8" wide x 6-7/16" deep x 4-1/16" high. Listed: UL/CSA. Learn More

Transient voltage suppressors. Multilayer ceramic. 18VDC, 13VAC, 1.7 Joules, Clamping voltage 42, breakdown voltage 25.5 Tolerance: +/-10%. Case: SMD T/R 1206Pkg. More info: http://www.avx.com/docs/Catalogs/tguard.pdf Learn More

Fuse holder. 5P 15Amp UL / 13Amp CSA, 300VAC. For fuses 1/4" X 1-1/4" long. Mount: Panel/Chassis. Contacts: Male 0.187" QC terminals. Rohs compliant. Note: Maybe used as 1P to 5P. Learn More