Cable Clamps

Hardware, cable clamp. 3/8". Single hole mount. Material: plastic. Dimensions: 0.482" OD. Overall 1.022" long x 0.376" wide. Color: black. Package of 30. Learn More

Hardware, cable clamp. 5/16". Single hole mount. Material: plastic. Dimensions: 0.394" OD. Overall 0.919" long x 0.373" wide. Color: black. Package of 40. Learn More

Hardware, cable clamp. Ferrule split-ring. Diameter: 7.87 mm. Shell size: 2, 3. Learn More

Hardware, cable clamp. 5/8" ID, rubber covered with a 1/4" mounting hole. Learn More

Hardware, cable clamp. 1/4" D. Material: nylon, black. With 13/64" mount hole. Package of 100. Learn More

Connector, cable. Package of 5. Learn More

Connector, cable. Package of 5. Learn More

TE Connectivity Amp Inc - 745134-1 - Connector, D-Sub Hood / Connector Cover.

Mounting Type: Cable. 

Straight (180°) cable exit.

Cable insulation diameter: 11.68mm.

Shell Size: 3. 

Material: Thermoplastic

Number of Positions: 25

Shielding: Unshielded

Wire/Cable Type: Round

Dimensions: Height 21 mm, Length 53.1 mm, Width 44.5 mm

Note: Hardware, cable clamp backshell. Clam Shell Will fit D-Sub connectors such as Amp Inc 745496-5, not included.

Learn More

Cable Clamps. 1 1/8" Vinyl Coated Steel Clamp. 

Vinyl coated loom clamps are the go-to protection from loom, wire, and cable runs. Each vinyl coated loom clamp is created with a molded vinyl coat that acts as a cushion to further assist in reducing vibration. These clamps are ideal for general wire fastening applications, such as fastening wire harnesses, hydraulic hoses, and cables.

Diameter: 1 1/8".

Material: Vinyl Over Steel.

With 1/4" slot mounting.

Note: New, older stock.

Package of 10.

Learn More

Umpco - MS-921333-71 - 5340-00-057-2904 -Hardware, Cable Clamp. 1/2" - 13/64".

Cushioned Metal, Synthetic Rubber Jacketed.

Mount: 5.0mm hole.Diameter: 0.203"

Material Thickness: 0.032"

Center to Center Distance Between Loop and Mounting Hole: 0.656 inches nominal

Distance from Loop Center to Tongue End: 0.875 inches nominal

Loop Inside Diameter: 0.500 inches nominal

Note: Clamp is actually marked MS21333.

Military bags are double marked 5340-00-057-2904.

Applications: Commerical, Industrial, Engine Wiring Harness

 

Learn More

Hardware, cable clamp. 3/8" (0.375") (9.9mm) D x 3/8" (0.375") (9.7mm) wide. Mount: screw, single hole 0.140" (3.5mm). Color: white. Lead free. Rohs compliant. Made in the USA. Package of 50. Learn More

ICO Rally - CLE3/16 Hardware, Cable Clamp.

A low cost clamp with excellent shock resistance in a temperature range from -40°F (-40°C) to 185°F (85°C).

0.188" (3/16")(4.78mm) ID x 0.484" wide x overall 0.797" long.

Single hole mount, 0.204" (5.18mm).

Color: Amber / Translucent Yellow.

Manufacture: ICO/Rally Corp.

Package of 100.

More info: www.icorally.com/pdf/WAC/page5.pdf

Learn More

Hardware, cable clamp. 1/2" ID x 1/3" wide. Material: Nylon/plastic. Color: black. Package of 50. More info: http://www.hellermanntyton.co.za/Download_Catalogue/Cable%20Securing%20Systems/Cable%20and%20Wire%20Mounts/hp_and_nx_plastic_p_clips.pdf Learn More

Hardware, cable clamp. 3/8" (0.375"). Material: polypropylene. Color: clear. Package of 50. Learn More

Hardware, cable clamp. 1/4" (0.275"). Material: polypropylene. Color: clear. Package of 50. Learn More

Hardware, cable clamp. 5/16" ID x 3/8" wide. Single mount hole. Color: black. Note: insuloid. Package of 100. Learn More

Hardware, cable clamp. 7/16" ID x 1/3" (0.377)") wide. Single hole mount. Color: black. Note: insuloid. Package of 100. Learn More

Hellerman Tyton - NX4 - 211-00235 - Hardware, Cable Clamp, HP Series.

For permanent or semi-permanent cable fixings this range of plastic P-Clamps can be used in many industries. Their light weight makes them particularly suitable for use in areas such as aircraft and aerospace where minimising weight, but retaining a strong fixing, is vitally important.

3/8" ID x 3/8" Wide.

Single Mount Hole

Fixation: Screw Hole.

Color: Black.

Material: Polymide 6.6 (PA66)

Temperature: -40 C to 85 C

Note: Insuloid.

Alternate: 211-00235

Package of 100.

Learn More

Hardware, cable clamp. 1.812-2.0" ID x 0.877" wide x 3" long (46.1mm - 50.8mm). Four seperate mount holes. Color: black. Note: insuloid. Learn More

Hellerman Tyton - NX14 - 221-10140  - Hardware, Cable Clamp.

For permanent or semi-permanent cable fixings this range of plastic P-Clamps can be used in many industries. Their light weight makes them particularly suitable for use in areas such as aircraft and aerospace where minimising weight, but retaining a strong fixing, is vitally important.

Product Family: HP Series

• Manufactured from Polyamide
• Good temperature resistance and high strength
• Wide range of sizes for every application
• Can be used without cable ties

Diameter minimun 22.2mm (0.875")

Diameter Maximum: 25.4mm (1.00") ID

Width: 5/8" (0.0625").

Four Seperate Mount Holes.

Color: Black.

Material: Polyamide 6.6 (PA66)

Note: insuloid.

Package of 5.

Made in England

NSN 5340-12-183-1678

Learn More

Hardware, cable clamp. 1/2" D x 3/8" wide. Material: polypropylene. Color: beige. Package of 50. Learn More

Hardware, cable clamp. 7/16" ID x 1/3" wide. Material: polypropylene. Color: clear. Package of 50. Learn More

Hellerman Tyton - 4-1305 Hardware, cable clamp.

5/16" ID x 3/8" wide.

Material: polypropylene.

Color: clear.

Package of 50.

Learn More

Hardware, cable clamp. 3/4" ID x 1/2" wide (Actual 0.687 - 0.812")(17.4 - 20.6mm). Four hole mount. Color: black. Note: insuloid. Package of 50. Learn More