Fittings

TOMCO - 3472R5 - Valved Flareless Tube Plug Fitting 

Tomco's precision line of couplers are ideally suited for instrumentation and chemical processing applications.

316 Stainless Steel Construction

Positive roller lock latching mechanism allows 360 degree swivel action

One hand required to connect or disconnect

Viton seals 

Smallest possible dimensions with maximum orifice size.

Integral flareless tube port fitting

Temperature range +20F to 400 F

Vacuum Data - connected 29.50 in. Hg

1/4" Tube

Packaged in factory reusable clear protective plastic tube

Note: Valved plug P/N 3472R5 must be used with valved coupler P/N 3452R5

Made in USA 

Southco - 84-29-101-10 - Coupler.

1/4 Turn

Knurled Type Head 

Lock Nut Fractional Turn Fastener

1-set contins 3-pieces

2-Plastic 1-Rubber

0.3'' long x 0.4" D x Expandable 0.20" ID.

Alternate: SOU84-29-101-10

RoHS Compliant

WAXMAN INDUSTRIES - 01-800 - Hardware, Pipe Adapter to Hose Barb.

Hose Barb x Male

Male 1/2", will Accept a 1/2" Rubber or Plastic Tube on one end and a 1/2" NPT ID fitting on opposite end.

Material: Galvanized Zinc Coated Steel for Corrosion Resistance.

Rated at 400 psi at 73 degrees or 100 psi at 180 degrees Fahrenheit

Overall Length: 3 Inch.

Type: ID 1/2" X 1/2"

Alternates: JMF Stel Male Adpter Blain 166019, 3111018089702, LDR Industries FIM MA-12

WATTS REGULATOR CO - 27-P3 Pattern Water Strainer.

One way. Two Output, Strainer 3/8".

Material: Brass

Proudly Made in the USA.

Alternate: Ecolab #92581004

New Old Stock

International Components Inc - PGME-13RB - Hardware, Straight Strain Relief Fitting.

Time Saving Installation: Simply push the cable through the strain relief fitting - tighten dome - done!

Dome Fitting, Black 

Thread Type: PG13.5 European Straight

Liquid Tight, New.

Made in USA

RoHS Compliant

Alternate: Sealcon 59-3011

Applications: Appliances

Conbraco Industries - 38-104-01 Atmosphere type vacuum breaker.

Application: Designed to prevent back-siphonage of polluted water into a potable water system. It should only be installed in areas where spillage of water could not cause damage and where it can be accessible for periodic maintenance. This device is not designed for continuous pressure application.

CAST BODY VACUUM BREAKER, 3/4" NPT, CHROME

125PSI @ 212 Deg F,

125 PSI @ 180 DEGREES

REPAIR KIT # 51-1339

3/4"NPT, Brass

Note: ALT P/N: ASSE 1001.

PLASTILINE - PVC1 - Schedule 80 PVC Union, Female 3/4" NPT to 3/4" NPT Coupling.

Material: Polyethylene

EPDM O-Ring Seal

Female 3/4" Threaed NPT

Schedule 80

Dark grey pipe and Fittings

Material: PVC Maximum Working Temperature (F): 140°

Alternates: Grainger 898-375-007, 9898-007, 511-14-34-34B, 164-104

Made In USA - New Old Stock

In-line fixed orifice air choke, 0.0075� Nice & New brass fittings - Many CLIPPARD pieces available

#10-32 �X� Coupling New Brass Pipe Fittings x coupling.15002-5 with (3) 10/32 ID threaded holes Unit measures13.5mm long x 9.5mm square.

Cooper Crouse-Hinds - LT50 - Fitting.

1/2" Liquid tight straight male connector without insulated throat bushing.

Note: Conduit.

CUSTOM - 8-629 - 1/4" Nylon Shaft Extenders, Attenuator Shaft Extension.

Fits 1/4" ID "D" Shape (Half Round) Shaft,

Durable Nylon Extender is Approximately 3" long.

Provides 2.5" Extension. 

Universal Audio or Industrial Applications. 

Great for Recessed Potentiometers, Rotary Switches, Thermostates.

Vintage - New Old Stock - Difficult to Find Hardware