Hardware

Bezel and red lens. Lens: 3.027" long x 0.899" high (Appears scratched). Black plastic bezel: 3.511" long x 1.359" high. New, older stock. Learn More

RADNOTI - 159954 - Universal Stand Clamp for the Medical Industry.

Simply hook on and tighten thumb screw.  No need to disassemble existing stand or remove and replace components to add a an additional component.

Open Sided Connector.

Medium (Red).

Learn More

RAYCHEM TE Connectivity - 222D932-4 - 222D932-4-00/42 - Cable Boot & End Cap.

Seal, Protect, and Strain-Relieve with Heat-Shrinkable Molded Parts in a Range of Shapes and Materials to Help Withstand Harsh Environments.

Heat Shrink Boots, 90 °, Size 222, Lipped, 4, 10, -55 – 135 °C [-67 – 275 °F], Occasional Fluid Exposure

Molded Part Angle (°): 90

Molded Part Shape Code : 222

Lipped : Yes

Material Code : 4

Material: Flame-retardant, Flexible Polyolefin

Temperature Range: -55°C to +135°C

Heat Shrink Boot Material Systems Code : 10

Thermofit Molded Boot 90 degree with Lip

Place over product, heat evenly until the tubing or molded part shrinks into place.

Thermofit Heat Shrinkable Polymer.

Alternate: 808472-000, Newark 45M0482 

Learn More

PULLMAN - MS-053 Band type counter balance 3 lbs.

Hardware Window Sash Balance.

Extends to approximately 3.5 feet.

Mount: Panel, vertical, flange.

Dimensions: Body 7/8" wide x 3-1/6" high.

Flange: 7/8" wide x4-1/3" high with 3-3/4" centers.

Proudly Made in USA

Learn More

PACTEC -71894-510-000 - LH64-130-000 - Universal Enclosure. LH Series

The LH series is a family of desktop enclosures with a wide range of sizes. The LH housings have robust flush panels and slightly radiused sides. Applications Include: Network Equipment, Test Equipment, Medical Devices, Scientific Instruments

Material: ABS Plastic (Acrylonitrile Butadiene Styrene)

Color: Black

Flammability Rating: UL 94 HB

Dimensions: 107 mm L x 155 mm W x 38.1 mm H (4.2" x 6.1" x 1.5")

Unit Weight: 9.439312 oz

Four (4) piece set = top, bottom, rear and front panel.

Separate panel part numbers: Top 71572-01. Bottom 71573-01. Rear and Front 71884-02-028.

Military ICN #: 92853-501000.

Internal standoffs in bottom and top for PCB-mount.

Vertical slots in top about 3/8-inch behind front and back panel slots for vertical PCB's.

Top and bottom are held together by two 4 x 1/2" sheet metal screws (included) with bottom access.

 

 

Learn More

NITTO DENKO - PERMACEL - P-221 Hardware, tape. 1-Mil Polyimide Film.

The ultimate in electrical insulation tape, our P-221 AMB. Thin and highly conformable, with outstanding puncture, tear and abrasion resistance at elevated temperatures. An ideal high performance tape for tabbing and holding Lithium Ion Battery Cells. Can also be used for for insulating mechanical parts, electronic parts, electrical insulation, fiber optics cable, insulation blankets and tubing, automotive diaphragms, sensors, and manifolds, etchings, shims, and for wave solder and solder reflow in electrical markets.

Electrical Insulating Tape.

Size: 0.256" (6.5mm) wide.

Min. Temp Tape Performance: -450 F

Application: High Temperature.

Total Tape Thickness: 2.6 mils 0.066 mm

Tensile Strength: 36 lbs/in 63 N/10mm

Elongation: 85% 85%

Adhesion to Steel: 24 oz/in 2.7 N/10mm

Dielectric Strength: 7,500 volts 7.5 kV

Color: Amber.

 

Learn More

Military - MS35338-39 - Hardware, Washer Split Helical, Locking, 5/64".

Screw Size: 2

Material: Steel.

Finish: Yellow Cadmium II

Dimensions: 4.1mm OD x tiny hole ID.

Hole dia 0.088" min and 0.094" max.

Outside diameter 0.172" max.

Material thickness 0.020" min and 0.026" max.

Note: Military.

Package of 100.

Learn More

Hardware, screw. 5/16-24 x 3/4". Military Machine Screw. Phillips / Flat Head. Thread class: 2A. Thread direction: right-hand. Thread length: 0.667" min and 0.750" max. Fastener length: 0.750". Head style: A38 flat countersunk. Head diameter: 0.556" min and 0.635" max. Nominal thread diameter: 0.312". Thread quantity per inch: 24. Countersunk angle: 99 Deg min and 101 Deg max. Material: Steel comp 302, 303 or 304. Package of 10.

Learn More

LOCKHEED - 6605-00-253-6547 - Military Strain Relief Front

Lockheed 6850059 , P/N 6846144-1

FSCM 03640

NSN 6605-00-253-6547

MAGNESIUM ALLOY,

7.090 IN. LG,0.300 IN. W,0.165 IN. THK

Learn More

Hardware, spacer. Thread size: #6. Bore size: 0.148" (3.8mm). Material: aluminum. Dimensions: 0.193" (4.9mm) OD, 3.835mm ID x 12.7mm long. Made of flat strip aluminum and rolled on precision equipment. Tight joint on outside diameter. Package of 50. Learn More

Hellerman Tyton - SNP32(E), SNP3210K2  Alt. 191-10329

Can be used as an alternative to metal hose clamps. Snapper can be used in markets as diverse as automotive, agriculture, white goods, venting systems, pumps and hydraulic systems to medical engineering.

Hardware, Hose Clamp. Snapper.

ID: 1.218 to 1.405". (30.3 mm - 33.1mm)

Operating Temp. -40C to +85C

Material: Polyacetal (POM)

Features

• Releasable and reusable plastic hose clamps
• Self-locking
• Releasable by giving a lateral movement to the 'head'
• Installation by hand possible
• Installation with processing tool for a secure tensioning
• For higher operating temperatures: Glass Filled PA66

SNP-Series is suitable for following markets and industries

•  Electronics Industry
 
•  Aerospace Industry
 
•  Defence Industry

More info: http://www.hellermanntyton.co.uk/productdetail?PRODUCTID=191-10329

Package of 10.

Learn More

HOFFMAN - MS-209 - Enclosure. Weatherproof Electrical Connector Junction Box

Seams Continuously Welded and Ground Smooth

3/4" to 1/2" Conduit Splice Adapter Box.

Complete with inside Cover Rubber Seal.

Oil-Rsistant Gasket

Screw Cover

Wall Mount

NEMA IP65

Material: Mild Steel.

Color: Metallic Gray.

Dimensions: Overall: 3.08" x 5.23".

Inside 2-3/4" x 4" x 2-1/2" deep, 0.085" thick.

Mounting Brackets have (4) slotted holes. A 0.68" hole in one end and a 0.867" hole in the Opposite end.

New Old Stock

Learn More

Golconda Screw Inc - 5-600-75 - Hardware, Wing Nut.

A nut that is installed by hand.

1/4-20 Forged Zinc Plated Steel.

Material: A low carbon steel for general use.

Thread Type: Coarse

Threads per Inch: 20

Package of 100.

Alternates: 25CNWIZ, B16250.025.0001, DY02581300, NWIN202521, TV164707

Made in the USA.

Note: Iron and steel wing nuts are conductive, magnetic, and stronger than brass or plastic wing nuts. They offer less corrosion resistance than stainless steel, brass, or plastic.

Learn More

Large split washers 3/4" Inside diameter, 1.2"OD - Ten per bag - made in USA Learn More

Hardware, nuts. Hex 3/4 x10. Chrome plated. Dimensions: 1.09" across x 0.65" ID x 0.62" thick. Package of 10. Made in the USA. Learn More

Electronic Hardware Corp - EHC - MS91528-0004B - Hardware, Knob.

0.5 x 0.655 x 0.3 x 0.177 MS91528 Series Knobs For 1/4" Shaft, with Dual Set Screws.

Skirted, with Arrow Dial.

Dimensions: 0.901" D x 0.661" High. (0.5 x 0.655 x 0.3 x 0.177)

Matte-Black Dial 

Note: Military Type.

Alternate: 212MS91528-0F4B

Learn More

ELESA. - KHR-5 – Fixed Crank Revolving Handle, Unthreaded Round Hole - Black Plastic. Reinforced Plastic Revolving Handle, Molded Fixed Straight Arm Crank. Revolving Handle - Black Plastic. Constructed of high strength reinforced plastic with reamed steel inserts. Unthreaded Round Handle mount for use in machinery and commercial product construction, Available with revolving handle or revolving fold away handle. Body Diameter: 1.060” Overall Height: 2.87” Color: Black Handle Style: Revolving Hole Type: Reamed Hole Mounting Type: Unthreaded Round Hole. Manuf in Italy. Learn More

Hardware, knob. For 1/4" shaft, with two set screws. Knurled and skirted. Dimensions: 1.828" D x 0.871" high. Note: Military MS91528-3F2B. Learn More

CAMBION - 415-1075-01-02-00 - Hardware. Equipment Handle. Material: Steel. Dimensions: Overall Width: 4.883" Long x 1.519" Wide x 0.225" Diameter Inside Depth: 1.199". Each end will accept a 10/32" Bolt. Alternate: Interconnection Products IPI 1075-01-02-00 Applications: Rack Mount Test Equipment, Made in USA Learn More

Bivar Inc - 461-440  Hardware, Spacers.

LED, 4 Pin foot-print.

Perfectly suited for in-line or grid alignment of LEDs.

For T1 (3mm) orT1-3/4 (5mm).

Material: Nylon.

Mount: PCB.

Dimensions: 0.440" (11.2mm).

Color: Natural.

Package of 50.

Learn More

Hardware, spacers. LED, tiny 6 Pin foot-print. Perfectly suited for T1 (3mm) or T1-3/4 (5mm). Material: nylon. Mount: PCB. Dimensions: 5.1mm round x 11.7mm (0.460") high. Color: black. Package of 50. Learn More

Bivar Inc - 462-600 LED Hardware spacers.

LED, 4 Pin foot-print.

Perfectly suited for in-line or grid alignment of LEDs.

For T1 (3mm) orT1-3/4 (5mm).

Material: nylon.

Mount: PCB.

Dimensions: 0.189" (4.8mm) square x 0.540" (13.7mm) high.

Lead spacing: 4.1mm centers.

Color: natural.

Package of 50.

Learn More

TE Connectivity AMP INC - 206322-9 - Hardware, Cable Clamp.

For Amp Inc circular connector.

Type: Backshell, Cable Clamp

Cable Opening: 0.703" (17.86mm)

Diameter – Outside: 1.131" (28.73mm)

Shell Size – Insert: 17

Thread Size: 15/16-20 UNEF

Cable Exit: 180°

Size 17.

Bundle diameter: 17.86mm.

hermoplastic.

Kit.

Learn More

3M - 4737T 1/4 - Hardware, Electrical Tape.

Scotch® High Temperature Fine Line Tape 4737T should be used for masking fascia, rocker panels, two-tone and other multiple color applications where critical paint break lines are required in high value processes. For indoor use only.

Scotch High Temperature Conformable.

Material: Vinyl Fineline.

Number 3m Part Number: 4737T

Adhesion To Steel Ozin N100 Mm: 10.5 (11.5)

Adhesive Type: Rubber

Backing Material; Vinyl

Color Translucent Blue

Dimensions: Width:  ¼” (0.250), Length: 36 Yards

Elongation: 115 Percent

Industries: Automotive; Electronics; Furniture; General Industrial; Metalworking; Military & Government; Specialty Vehicle; Transportation; Woodworking

Maximum Operating Temperature: 149 C (300 F)

Tensile Strength Metric: 280

Thickness: 5.4

Size: 1/4" x 36 yards x 5.1 mil (0.13 mm).

New Old Stock

SKU: 00021200722462

Proudly Made in USA

Learn More