Bestsellers

OSLO Switch - RTP1A9C9 - Rocker Switch, SPST, 2 Position.

20AMP-125VAC 15AMP-250VAC, 3/4 HP 125/250 VAC

Color: Black, Gloss

Contact Ratings: 16Amp 125VAC/10Amp 250VAC.

Connection: 0.25" Quick Connect or Solder Terminals.

Mech: Panel Mount, Snap-In.

Contacts: Fine Silver for Long Life Dependability.

Dielectric Strength: 1250 volts (live parts to ground).

Electrical Life: 35,000 operations at maximum rating.

Mechanical Life: 100,000 Mechanical Operations.

Insulation resistance: 5 megohms.

UL Listed, CSA Approved.

Proudly Made in USA

 

Learn More

Vishay - WY0102MCMBRAKR - Capacitor, Ceramic Suppression X1/Y1.

Epoxy, Dipped Insulating, Flame Retarding to UL 94V-O 

1000pF (0.001uF) 250/440VAC

Tolerance: 20%.

Dielectric strength: 2500 VAC Between Leads, 2000 VAC Body Insulation.

Dimensions: 6.5mm Diameter X 4.5 mm Thick

Lead Spacing Separation: 5.0mm

Alternates: DE1E3KX102MN4AN01F, C907U102MYWDBA7317, 25YD10-R, 30LVSD10-R, DE2E3KY102MA3BM02F, C901U102MYVDBA7317, C901U102MUVDBA7317, DE1E3RA102MN4AN01F, C901U102MYWDBA7317, WYO102MCMBF0KR

Note: Alternates have same rating but in some instances a larger package. Check spec requirments before substituting. 

 

Learn More

GEMCO - 404S32121YAA33 - Stock One Switch, Rotary.

Commercial Industrial Quality Switch

Contacts: 2P3T.

Maximum Voltage: 300

Actuator: Momentary to Right and Left.

Mechanical: 2 Panels, 8 Contacts Sets.

Mounts in a 0.85" hole, complete with 4 metal washers, one cork and one locating pin.

Note: Selector switch with adjustable cam.

Each Switch consists of End Plate, Cover, Two Contact Blocks, Deten Mechanism, Operator, and Switch Body.

Genuine Vintage GEMCO - New Old Stock

In Manufactures Original Packaging with Instruction Sheet.

Alternate: GE 404S32121YAA33

Proudly Made in USA

Learn More

WEHO - S-400-24 - Power Supply, DC, Switching. 400 Watt, 24 VDC, 17 Amp

Connect this unit to 110 or 220 Volts AC household power, and it will supply 400 Watts at 24 Volts DC and 17 Amps.

This power supply has been engineered specifically for use with DC motors. Most power supplies designed for use with LED lighting or other electronics will simply shut down when exposed to the high current demands of motors. Built-in current limiting protects the unit from overloads and short circuits. The current limiting feature enables these power supplies to keep functioning through the high-current start-up surges from motors. AmpFlow power supplies will just limit the current to the rated maximum even when a larger load is called for, (like when a DC motor starts up). Also, inductive loads (like motors) can cause damage to power supplies that are not designed for them.

These power supplies also work well in any application where AC line voltage needs to be converted to DC voltage. Other uses include LED lighting, HAM radio, battery charging, and replacing plug-in AC adapters when more power is required.

Short-circuit and overload protections help these units survive harsh operating conditions. The power supply shuts down temporarily if the temperature, current, or voltage goes beyond the safe operating range, and it starts up again automatically when the condition goes away – no rebooting is necessary.

This high-efficiency power supply has an output voltage that is adjustable by plus or minus 10%. It includes an EMI filter to minimize interference with radio signals and a soft-start circuit that reduces the AC inrush current peaks. Every power supply goes through a full-load burn-in test, so no defective unit leaves the factory.

DC output voltage: 24V

DC output current: 17A

DC output voltage error: ±1%

Ripple & noise: 150mV

Efficiency: 86%

AC input voltage range: 85-132VAC/170-264vac 47-63HZ 

Input current: 6.5A/115V 4A/230V

AC inrush current: Soft-Start Current 25A/115V 50A/230V

Leakage current: 3.5mA/240VAC

DC adjustable range: ±10% rated output voltage

Over load protection: 105-135% cut off the output auto -recovery

Over-voltage protection: 115-135 cut off the output auto -recovery

Setup rise hold up time: 200ms 50ms 20ms

Withstand voltage: I/P-O/P:1.5KVAC 1minute, I/P-FG:1.5KVAC 1minute, O/P-O/P:0.5KVAC 1minute

Withstand temperature: -10°C~+60°C,20%-90% RH

Dimensions: 8.5" X 4.5" X 2.0"

Weight: 1.05kg (2 Pounds)

This unit meets all the following safety and EMC standards: UL 1950, EN60950, EN55022, IEC100-3-2, CE, ROHS

Applications: Motor Controllers, CNC, Industrial Automation, LED Strip Lights, CCTV Power Supply , AC/DC Adapter.

Alternates: AmpFlow S-400-24, Meanwell 2-400-24, Mulview S-400-24, Mingwei S-400-24

Factory New

 

Learn More

Trompeter Electronics - TAI-000 Rev C - BJ27 - 14949 - Connector, coaxialConnector, BNC.

Housing gender: Female.

BNC 50 Ohm.

Mounting type: Panel.

Made in USA. 

Alternate P/N: 14949 TAI000 REV C

Learn More

Eaton Cooper Bussmann - HKT - 20Amp 13-22V Amber Lens Indicating Fuse Holder.

Eaton/Cooper/Bussmann HKT 13-22V Amber Lens panel mounting indicating fuse holder mounts in a 0.63" hole with supplied nut. Holds standard 3AG size fuses up to 20Amp. The built in lamp operates from 13 to 22VAC. Fuse holder automatically lights up when fuse blows.

Fuse Holder Type: Indicating Fuse Holder

Fuse Current: 20A Fuse

Voltage Rating: 13 -22 VAC 

Size Held: 1/4" x 1-1/4" (6.3 X 32 mm)

Hole Diameter: 16 mm

Holder Terminals: Solder Lug

Indicating: Incandescent/Amber

Shaft Type: Bayonet Knob

No. of Fuses: 1

Fuses Product Range: HK Series

 

Learn More

CINCH JONES - S-310-CCT-K Connectors, Cinch, Series 300.

Status: Discontinued

Housing for 10 Position connector not included.

Mounting hardware: Cable clamp top with latch. 

Side Clips plus a 180 Deg cable exit complete with cable clamp/hardware.

Dimensions: 1-1/2" x 5.8" ID.

Please see our P/N S-310-LAB for 10 Position Female connector, not included.

Also see mating hood and connector: P/N P-310-LAB & P-310-CCT-L, not included. 

Proudly Made in USA

New Old Stock

Learn More

WIMA - MKS0D024700B00 -MKS2-0.047uF63V Metalized Polyester Capacitor. 0.047uF 63V. 

Tolerance: 10%.

Material: Metalized Polyester (PET).

Package: Radial Leads.

Dimensions: 4.6mm long x 2.5mm wide x 7.0mm high.

Lead spacing: 5.0mm.

Package of 50.

Learn More

Westinghouse - T80J17 - SCR. Large Stud, Used/RFE. The Westinghouse T80J17 is a Silicon Controlled Rectifier (SCR) / Thyristor. While specific voltage and current ratings for the "T80J17" string are not explicitly listed in detail on a single datasheet in the search results, similar parts from that series indicate these are generally high-current, stud-mount power semiconductors. General Specifications • Device Type: Silicon Controlled Rectifier (SCR) / Thyristor. • Package Style: Stud mount (typically requiring a heat sink for thermal management). • Primary Function: Unidirectional high-speed switching and phase control for industrial power applications. Typical Applications • SCRs of this class were commonly used in: • Motor Speed Controls: Regulating power for industrial machinery. • Controlled Rectifiers: Converting AC to DC in battery chargers and welding equipment. • Phase Control: Managing heating elements or high-power lighting systems. Genuine Westinghouse – Used - Removed from Equipment w/Hardware – Rare Learn More

Western Electric - 2-Y - SWBD - Panel / Switchboard Lamp

Slide Base Indicator Lamp, Carbon Filament

Miniature Telephone Light Bulb

Voltage/Current: 48V, 30-42mA

Lamp Diameter: 0.3075"

Used with Nos. 12, 13, 30, 34, 49, 50 or similar type lamp sockets

Genuine Western Electric - Factory Vintage New Old Stock

Made in USA

Priced per Bulb

Learn More

Resistor, ceramic. Resistance: 600 Ohm. Power: 100 Watt. Technology: wirewound. Enamel coated. Dimensions: 1.217" D x 6.5" long with an ID of 0.731". Learn More

WARD LEONARD - RWO20S1500 - 20S1500 - Resistor, Ceramic.

Stripohm resistors utilize a flat, oval-shaped, ceramic base on which the resistive conductor is wound, they are practically identical in construction with Vitrohm tubular resistors. The core or base has a smooth surface with no sharp edges. This design precaution is taken to guard against wire breakage during manufacture. The fact that the core is slightly elliptical shape that increases the radiating surface slightly and provides a core considerably stronger than an ordinary flat rectangular base, and insures that the wire lies flat against the entire winding surface. Stripohm resistors are equipped with metal strip (spring clip type) mounting brackets. Stripohm resistor can be chassis mounted or stacked.

Resistance: 1500 Ohm.

Power: 20 Watt.

Technology: Wirewound, Stripohm.

Terminals: Solder Lugs

Viteous Enamel Coated.

Dimensions: Overall 2.632" Long x 0.868" Wide, including contacts x 0.343" High.

New Old Stock

Additional Information: https://worldradiohistory.com/BOOKSHELF-ARH/Handbooks/Ward-Leonard-Electric-Handbook-Of-Power-Resistors-1959.pdf

 

Learn More

Resistor, ceramic. Resistance: 10K Ohm. Power: 20 watt. Technology: wirewound. Enamel coated. Dimensions: 0.633" D x 3-1/8" long. Radial lug. Note: Alt P/N: T3 1/8-WFV-219-2-10000. Learn More

Kemet - R76PD1330J - Capacitor, Metalized Polypropylene Film.

3300pF 630VDC.

Tolerance: 5%.

Package: Radial.

Dimensions: 10.4mm wide x 3.4mm deep x 8.5mm tall.

Lead Spacing: 6.8mm.

Package of 2.

Learn More

Unidentified MFG - Micrometer Head - Micrometer Head, 0-25mm Metric. Precision Gauge Micrometer Head, 0-25mm Metric. Resolution: 0.01mm, with Locknut. Length: Approximately 4" Long. Spherical Tip. Possible Mitutoyo 148 Series. New Old Stock Learn More

Sanyo - STK439 - IC, Audio.

2 Channel AF Power Amplifier.

VCC 39V, 56V max.

15 Watts Minimum.

Package: Thick Film Hybrid 15 Sip.

Original Sanyo - New Old Stock

Removed from Manufacture Pkg's.

Similar to ECG1219

Additional Forum Information: https://www.diyaudio.com/community/threads/stk439-internal-component-values.383906/

Learn More

VSQ0055 - VFH Matching Box, Coaxial Transformer

Transformer, coaxial.

Input 75 Ohm to output 300 Ohm. 

VHF/UHF/FM & Any Video

Made in Japan

Quality Constructed Vintage - New Old Stock

Learn More

IC, sockets. Machined 144 pin grid array. Gold contacts, 38mm square. Learn More

CUI Devices – PJ-003A - 2.5x6.5mm, DC Power Receptacle, 2.5mm X 6.5PCB Mount Right Angle UI Devices – PJ-003B - Power Barrel Connector Jack 2.10 mm ID (0.098") Through Hole, Right Angle Status: Discontinued 2 Conductors, 3 Contacts Single Switch, Normally Closed Voltage Rating: 24 VDC Current Rating: 2.5 Amps Operating Temperature: -25 C to 85 C Housing Material: Polybutylene Terephthalate (PBT) Contact Material: Brass, Copper Alloy Single Switch, Normally Closed Inner Diameter: 2.1mm Insertion Depth: 6.5mm Dimensions 12.3 x 10.8 x 8.4 mm PCB Mount RA. Mating Length/Depth: 0.256 (6.50mm) Material Flammability Rating: UL94 V-0 Additional Information: https://www.mouser.com/datasheet/2/670/pj-003a-1312568.pdf?srsltid=AfmBOopi9vkktnym_y66T92tZv8EjUB9Ck1SbGUb1dDHDlFLDaqMVT4- or https://www.alldatasheet.com/datasheet-pdf/pdf/889339/CUI/PJ-003A.html Learn More

RJ12 Input to 2 Way Outlet RJ11 Phone Modular Jack Line Splitter Adapter 6P4C Beige.

Easy to Connect telephone adapter is used to connect the line or the single jack of the telephone socket, with accurate signal transmission and clear sound quality for 2 way Outlet.

Durable High quality phone line splitter made of ABS material, non-toxic and harmless, Long Life.

Short length eliminates unnecessary clutter behind the phone and improves signal strength. 

1 Male Plug RJ12 to 2 Female Duplex Sockets, 6P4C RJ11 plug.

Single socket used to connect to line or telephone outlet

Double socket end used to connect 2 devices (Telephone, Fax, etc.)

Durable construction with ABS UL 94-V2 housing and thick gold plating on contacts

Approximate Dimensions: 165X26X21mm / 6.5”x 1.0”x 0.83”

Telephone, Splitter. "Y", Male 6 pin phone connector to 4 pin female out on a 4" pigtail.

Applications: Telephone, Fax Machine, Ooma VOIP telephony unit, Office Equipment.

Alternates: a14122900ux0039, 9SIA623HZ28791, SPM7921066923, a14062600ux0566

RJ11 is an older version of RJ12, and they are the same size. The difference is that RJ11 uses four internal wires (called conductors) while RJ12 uses six. RJ12 is backwards compatible with RJ11, but RJ11 will not work with RJ12.

Learn More

Philips - 222280832809 - Film Dielectric Trimmer Capacitor.

150V 10mm

Capacitance: 6 - 80pF.

Mount: PCB 3 Leads, Top Adjustable. 

Learn More

This solenoid has a T-shaped laminated design plunger and laminated steel frame. It has the unique ability to hold an exceptionally heavy load with a minium of humming or vibration. To minimize the humming or chattering of most solenoids, the contact surfaces of the laminated frame and plunger are machined to provide a smooth and flush contact surface.

Laminate solenoids consist of a laminated steel frame, a coil, and a movable plunger in the center of the coil. When the coil is energized the plunger is pulled into the coil

E120-87 - Linear Solenoid,

AC. Operation: Pull.

Load force: >48 oz.

Stroke length: 0.75"

Duty cycle: Continuous.

Coil: 115VAC 0.24A 475 Ohms.

Plunger Config: Rectangular w/u-brkt.

Mech: 8 holes on base.

Body dim: 1.2"x1.5"x2.5".

Connection: solder lugs on coil.

Weight: 0.4 lbs.

New Old Stock

 

Learn More

American Wire & Cable - BA15s - Lamp Socket with 2 Hole Flange Mounting, 9.5” Leads, Single Contact Bayonet. Heavy Duty Lamp Socket for Single Pin Single Contact Bayonet. Ideal for surface mount either screwing or bolting Base Type: BA15s Standard Type with 2 parallel clip points in 180∘ Wattage: 100 W Mounting Type: Screw Mount Base Plate, Steel Snap-In Twist Bulb Mounting Base Dimensions: Flange 43.3mm (1.70") Long x 15.8mm (0.625") Wide x 0.83mm (0.035") 1.3mm Thick with 27.0 mm (1.0") Centers. Socket Dimensions: 16.7mm (0.66”) OD (15.5mm ID), x 25.0 mm (0.98”) High. Lamp Sits 13.4mm Wire Lead Length 9-1/2". 105 C, Two Wires w/One Soldered to mounting Base. Bulb Types: 1073, 1093, 7506, 1156, 1141, 67 Alternates: Leviton LH1158, LH0707, 905-72808 Applications: Car Boat Truck Marine Light Bulb Socket Holder Alternates: BAY15D-SW, Approvals: CSA, UL Made in USA Learn More

Transformer, Video.

Matching. 75 Ohm to 300 Ohm.

Frequency: 5-900 MHz UHF/VHF/FM

Plastic Case.

Dimensions: 1.328" long x 0.917" wide x 0.945" high.

Alternate: UMT-7-4.

Learn More