Featured Products

LAMPS 2pin BAYONET BASE. App. 5V @ 1.5A. Learn More

5V 3.8 AMPS IP # 0071003 Learn More

Chicago Miniature Lab - 1696 - Lamps & Lights.

Description: Incandescent, Clear, 500 Hours, 2" (50.8mm) MOL.

Voltage: 28V

Current: 0.42 Amp.

Power: 11.8 Watts

Candle Power: 10 MSCP.

Filament Type: C-2V

Shape: S8

Base: BA15d, DC Bayonet, Double Contact Bayonet

Genuine Chicago Miniature - New Old Stock

Applications: Medical, Marine, Commercial, Military

Alternates: Military 15584-11, BW.1696

Learn More

Cherry Electrical Products - HE645004 Sensor, Hall Effect.

Package: 3 pin.

Note: Cross VN101501.

Digital Heat Staked Vane Sswitch.

Learn More

Cherry Electrical Products - ZF Electronics - HE61-5001 Tranducer, Sensor.

Gear tooth speed sensors are Hall Effect devices designed for use in applications where ferrous edge detection/near zero speed sensing is needed. They provide a sinking current output.

Hall Effect Speed Sensor.

Applications:  Speedometers, Anti-lock braking systems, Exercise equipment, CNC machine tools

Note: Cherry Electrical has since been acquired by ZF Electronics. 

Power Supply:  Vcc 24V

Output On Current: Isink 20mA

Temp. Range:  -40 to 150 C

Operating Frequency: 15KHz.

Dimensions: 15/32" - 32 Diameter Threaded Bushing 1" long with two nuts and three 36" long 120 AWG leads.

Air Gap 2.032mm: Output Digital 

 

 

Learn More

Switch, toggle. Contacts: 3PST. Contact Ratings: 15Amp 125VAC, 10A 250V (3/4HP, 250VAC. 1,2 or 3-Phase). Actuator: On-(Mom). Connection: 1/4" QC terminals. Mech: Panel, bushing 3/8". Panel hole: 1.332" (33.8mm) long x 1.095" (27.8mm) wide x 0.773" (19.6mm) high, plus contacts. Note: Both positions maintained. Bushing length: 11.5mm. Actuator length: 17.2mm long. Complete with hardware. Learn More

CHROMALOX - MF3300058V224A Heating Element, Immersion.

High Watt Density 

Power: 120V 3000W.

Mounting: Top Mouting Plate 2-1/2"sq.

Element is 10-1/2" Long.

Alternate: 8-935, TG1303L.

Applications: Injection Molding Machine and Coffee Maker Heater Element.

Learn More

Chicago Miniature Lab - CM2157-201

Type: Miniature Incandescent.

Connection: Wire Terminals

Voltage: 6.3V

Current: 150mA

Candle Power: 1/3CP

Size: T3-1/4 with bare wire leads.

Bulb dimensions: 0.391" (9.9mm) D x 1.0" (25.4mm) high.

Package of 5.

Learn More

CHROMALOX - 393-115472-013 3471P Heater Coil.

Power: 240V 750 watt.

Curved (36" overall) into a 7 x 3 x 3" space.

Note: TI-38X982 0C-260-4981, Asbestos Covered Leads.

Applications: Coffee Maker Heater

Learn More

CHALLENGER - 889-84198-0 Intermediate E17 Porcelain Lamp Socket.

Simple, Classic and appealing - these Vintage Marquee Bulb Sockets are absolutely the highest quality available. A two-piece porcelain assembly that screws together. There are 2 recessed areas on the bottom side for wire routing. Simply unscrew the top porcelain piece to remove base. Wire these vintage holders in parallel and use Standard E17 size bulbs. Numerous ways to incorporate these into your DIY lighting project. This is a slightly smaller bulb that is an ideal size for efficiency. 

E17 Intermediate Socket, 250V 75 Watt. PO9550-T

Keyless Porcelain Sign Receptacles, 2 Piece Unit.

Top Quality Electrical Supply For Your Restoration or Custom Lighting

Perfect for Restoration of Lighted Advertisement Signs.

Create your design for Bars, Arcade, Business, or Holiday display.

Overall Dimensions: 1.40" Diameter X 1.40" High

Mounts in a 1.0"  Diameter Hole   

Price is for 1 Socket consisting of Base, Screw-on Mounting Cap and Gasket 

Genuine Challenger New-Old-Stock - High Quality - Vintage Marquee Signs

UL Listed

Proudly Made in USA

 

 

Learn More

Centronix - BT-4B - Beaded, Cable Ties. 4" Long. Blue Package of 1K. Features: • Easy to install and release • Beaded design keeps wires from shifting or slipping • Polypropylene material is very flexible Beaded, Cable Ties. 4" Long Type: Beaded, Resealable Material: Polypropylene (PP) Color: Blue. Mounting Type: Free Hanging Package of 1000. Alternate: BT-4-10-BL Manufactures Sealed Bag. Learn More

Central Semi - 1N5401 - Diode. 100V 3Amp. Package: axial leads.

The CENTRAL SEMICONDUCTOR 1N5400 series types are axial lead silicon power rectifiers designed for power supply and general purpose rectifier applications.

Repetitive Reverse Voltage: 100V

DC Blocking Voltage: 100V

RMS reverse Voltage: 70

 

Learn More

Relay, power. Input: DC. Contacts: SPDT. Coil Voltage: 24VDC. Coil Resistance: 2.5K Ohm. Connections: 8 Octal plug-in. Mech Mtg: PCB. Packaging: Plastic enclosed. Note: New, older stock. Learn More

DC/DC Converter. 3 Watt. 4 Channel dual output unregulated. Quad +/-15V. 4 Isolated plus and minus outputs. Input: 10-18VDC. Output current: 25mA each output, 200mA for all outputs. Used/Removed from equipment. Learn More

C & K Components - KC11P4CQ Switch, Pushbutton.

Contacts: SPST-Normally Open Contacts.

Contact Ratings: 12VDC or 0.6Amp 12VAC.

Actuator: Momentary.

Mech: PCB 4 pin. Body: 6.1mm square x 3.8mm high plus non-threaded actuator 3.2mm D x 5.7mm long.

Note: Tactile.

Life expectancy: 100,000 cycles.

New Old Stock 

Learn More

IC, A/D converter. Resolution (Bits):12, Sample Rate:100kSPS,Input Channel Type:Parallel, Data Interface:Parallel, Operating Temperature Range:-40�C to +85�C, DNL�:1LSB,28-SMD SOIC Learn More

IC. Unknown values & function. Case: TO-99-8 gold leads, in lead protectors. New. Very nice. Learn More

BOWMAR-HAROWE / ALI - 273B-1 - Digital Carrier Analysis Test Set

Serial Number 2426

Made in USA

Learn More

Switch, slide. Contacts: SPDT. Contact Ratings: 6Amp 125VAC or 28VDC, 3Amp 250VAC (0.4VA 20V AC/DC). Actuator: (Mom)-None-On. Connection: solder. Mech: PCB. Panel hole: 12.8mm long x 6.7mm wide x 6.0mm behind board, plus contacts. Flange mount 19.5mm long x 6.7mm wide, with two mount holes at 17.5mm centers. Learn More

C.P. Clare & Co - HG2A1001 Relay, HG-wetted.

Input: DC.

Contacts: DPDT.

Contact Ratings: 250VA.

Coil Voltage: 84VDC.

Coil Resistance: 5K Ohm.

Material: Mercury.

Connections: 8 Octal plug-in.

Packaging: 1.5" D x 3-5/16" high.

New Old Stock

Learn More

Relay, reed. Mech Mtg: PCB 4 pin. Size: 2.605" long x 0.617" deep x 0.507" high. Note: Yellow. Learn More

IC, A/D converter. 12 Bit, complete with clock and input buffer. Operating temperature: 0 to 70 Deg C. Package: 32 Cdip hermetic side braised, gold leads. Learn More

CABLES TO GO - 02771 Connector.

Quickly change the gender, or join two cables together. Save the cost and hassle of buying a new cable by just changing the gender of your port and using the cable you already have. Each changer is molded and fully shielded, preventing any unwanted EMI/RFI interference caused from office equipment.

Serial RS232 Gender changer DB9 male to male.

Converts a DB9-pin female to a DB9-pin male out.

UPC 57120 02771

 

Learn More

CABLES TO GO - 10480 - Gender Changer

Null modem serial cables allows two DTE or DCE devices to communicate with no conflict in data transmission. The transmit and receive signals are crossed to ensure proper data transmission. Each null modem cable is designed with a rugged, overmolded construction that provides added strain relief and a solid connection each time.

Plus the cable is foil shielded for EMI/RFI protection from surrounding office equipment and flourescent lights. Thumbscrew connectors provide a fast, easy connection every time.

DB9-Position, Female to Female on a 1 foot Legth Cable (Null Modem).

Product Line: C2G                           

Color: Beige

Connect two PC serial ports

Cable is foil shielded for EMI/RFI protection from surrounding office equipment and flourescent lights

Thumbscrew connectors provide a fast, easy connection every time

Null-Modem Wiring Scheme

Fully Molded Connector and Strain relief

Jacket Material: PVC (Polyvinyl Chloride)                              

Cable Type: Serial, Null Modem                

Jacket Rating: Standard Non-Rated 

Cable Length: 1 ft (.3M)

UPC Number: 757120104803

Applications: Residential, Commercial, Industrial    

Learn More