Featured Products

IGBT. 600V 50 Amp. Module, no hardware. Used/Removed from equipment. Note: Marked 50DY-12H. Learn More

Powerex. - CD630815 – SCR / Dual Thyrister. 150Amp 800V, RFE. The Powerex CD630815 is a high-power SCR (Silicon Controlled Rectifier) module, specifically a dual thyristor POW-R-BLOK™ isolation module. It is designed for industrial applications requiring high-voltage and high-current switching. Key Specifications • Voltage Rating: 800V • Current Rating: 150 Amp • Configuration: Dual SCR (two thyristors in a single isolated package). • Package Type: POW-R-BLOK™, which provides electrical isolation between the semiconductor elements and the baseplate, simplifying heat sink mounting. Common Applications • Motor control (AC/DC drives). • Power supplies (uninterruptible power supplies, battery chargers). • Heating control (industrial ovens and furnaces). • Welding equipment. Genuine PowerEx- No Counterfeits – No China- No Delays – No Disappointments Used/Removed from equipment. Learn More

TO-8 RF AMP - cross: Spectrum Microwave TM5154 Learn More

17.1DB 5-1300Mhz TO-8 RF AMPlifier Learn More

PTC - 12736-002 Cable assembly.

Female 7 pin XLR to 25 pin S. 

15 foot 11 conductor with only two conductors used.

Learn More

Qualtek Electronics - 09450-R – Plastic Fan Guard / Retainer, Fits 120mm Square Fan, Plastic 123.5mm OD. Fan Accessory, Finger Guards, Filters & Sleeves Material: Plastic PC 2805 UL94V-2 Retention: Snap-On Maintenance: Being a snap-on plastic part, it allows for tool-free removal to clean or replace optional foam filter. Approximate Overall Dimensions: 124mm x 124mm x10mm Mounting Hole Centers: 104.7mm. Color: Black RoHS Compliant Alternate P/Ns: 6196-09450-R, Q838, 09450-R-ND Note: Filter Media Purchased Separately No need to buy 100 Pack. New Old Stock Learn More

Switch, micro pushbutton/pin plunger. Contacts: SPDT. Connection: solder. Body: 1.097" long x 0.323" wide 0.626" high, with two hole mount at 0.97" centers. Learn More

Switch, micro pushbutton/pin plunger. Contacts: SPDT. Connection: solder. Body: 1.097" long x 0.323" wide 0.626" high, with two hole mount at 0.97" centers. Learn More

Transistor, IGBT. Insulated gate bipolar. Max voltage: 1200V. Max current: 200Amp. Package: Module insulated 2-element. P/N: CM200DY-24E. Application: High power switching use. AC drive inverters. Servo controls. Learn More

TE Connectivity - Potter & Brumfield - W28XQ1D-10

Circuit breaker. 10Amp 250VAC 32VDC.

Mount: panel, snap-in with two 1/4" qc terminals.

Fact tab is 0.75" square. Dimensions: 0.612" x 0.530" behind panel.

Listed: UL/CSA.

Made in the USA.

Learn More

Housing w/ mount for Micro Video Camera. Little loudspeaker housing, but requires a warbling frequency to be heard. Has a 1" dia PZT element and an audio transformer on a pc board and a 30' two-conductor cable, but would be more useful as adjustable wall or ceiling mounts / enclosures for some of those new Micro Video Cameras. Dimensions: 2.5" long x 1.75" square in front on nice swiveling mount. Unobtrusive beige. Batteries not included. Learn More

3PDT-5A 24VDC Press-to-Test button on top. 472-ohm 51mA 24VDC coil. Enclosed, transparent plastic case with mounting flange 2.5"spacing. 0.187 QC solder terminals. 3 oz.

Learn More

Relay, DC. 24VDC 3PDT-10Amp. Plastic enclosed/dust proof. Learn More

Relay, AC. 120VAC 3PDT-10Amp. Plastic enclosed.

Learn More

SCR, inverter. 260Amp 600V. Case: TO-200AB. Learn More

Plumbicon imaging tube, 1". Military NSN 9300-849-50144. Plumbicon tubes manufactured by Narragansett Imaging. Learn More

IC, voltage reference. 5V. Input: 7V to 40V. Series: Topology. Temperature coefficient: 8.5 ppm. Operating temperature range: -0 to 70 Deg C. Package: TO-99-8. Note: Manufacture: PMI / Precision Monolithics. Note: Light Oxidation on TO-99-8 Can. Learn More

Boards. Picker replacement. Assembly with many valuable components attached and or in sockets. Example: four PK1000 SYM0380897, four PK1000 NCR0380897, three VSLI VY13066-2. Learn More

Boards. Picker replacement. CPB Assembly with many valuable components attached and or in sockets. Example: one Intel A82389-10, Motorola XC68040HRC25M, one Signetics SCC2698BC1A84 and two ATT3042-100M84 integrated circuits. Learn More

Boards. Picker replacement. Assembly with many valuable components attached and or in sockets. Example: Forty eight Toshiba TC524258BZ-80. Learn More

TE Connectivity Potter & Brumfield - JWD-171-17 - Reed Relay, SPST, 20VDC, 50mW, 8-DIP

Contact Plating: Ruthenium

Mount: PCB, Through Hole 14 Pin DIP form

Number of Terminals      8

Weight 2.299146 g

Coil Current: 10 mA

Coil Power: 100 mW

Coil Resistance: 500 Ω

Coil Type: Non-Latching

Coil Voltage (AC): 6 V

Coil Voltage (DC): 5 V

Contact Current Rating: 500 mA

Contact Resistance: 200 mΩ

Contact Voltage Rating (DC): 20 V

Current Rating: 500 mA

Insulation Resistance: 10 GΩ

Operating Temperature: -35 °C to 85 °C 

Operate Time: 1.5 ms

Power Consumption: 288 mW

Release Time: 500 µs

Switching Current: 500 mA

Switching Voltage: 28 V

Throw Configuration: SPST

Voltage Rating (DC): 100 V

Dimensions: Height 8 mm, Length 19.56 mm, Width 7.62 mm

Alternate: 1-1393771-1

Learn More

DPDT 10A gold plated contacts - 470-ohm coil - Octal base plug-in 2-available, one has missing(broken off) phenolic center locating pin, still functional) Learn More

POMONA ELECTRONICS - 4723-0

Test Clip. Mini Grabber, hook.

Black with shrouded banana jack, accepts newer moveable shrouded banana plugs or regular old fashioned banana plugs.

Rating: 30VAC / 60VDC 5Amps.

Hook max opening 0.12'' / 3mm, overall length 2.54" Hook contact:

Beryllium copper gold plated per MIL-G-45204.

Spring is stainless steel #302 - banana jack.

Nickel plated per QQ-N-290.

Glass Filled Nylon Insulating Material

Maximum Temperature 102 C (216 F)

UNSPSC Code 39121729

Learn More

Plumbicon 101XQ Video Camera Tube. Electrostatic deflection for improved corner resolution, diode gun, low output capacitancea Plumbicon XQ5002 imager tube can reproduce an image with four times the number of resolvable elements achieved previously, and when used with an associated low noise amplifier the camera produces its video output signal with a signal to noise ratio of 60 dB. USA. Learn More