Featured Products

MT-Pulser. Learn More

Switch. Rotary contact block/ housing only. No actuator. NIB, with manufactures installation sheet. Learn More

Switch. PWP13 - Pushbutton head/actuator only. NIB, with manufactures installation sheet. Learn More

Lamps & Lights. Indicator body. No lens cover, no lamp. NIB, with manufactures installation sheet. Note: Oiltight. Learn More

Lamps & Lights. Indicator body. No lens cover, no lamp. NIB, with manufactures installation sheet. Note: Oiltight. ALT P/N: 85105. Learn More

ESSENTRA MICRO PLASTICS - 5099000 - 36440MF025 - Hardware, Standoff Spacer.

Male to Female Hexagonal Insulators, PCB Support.

Shape: Hexagonal 4/40 ID Female and 4/40 Threaded Male.

4/40 X 1/4L (0.25")

Stackable for Alterante Heights

Material: High Temperature Nylon

Temperatur: -40 C to 85 C

Package of 20.

Spacewr Length: 0.250"

Thread Length: 0.188"

Material Flamability: UL94 V-2

Note: Micro Plastics is now Essentra

Alternate: Essentra 36440MF025, Keystone 4940

Learn More

METAGRAM AMERICA INC - AM391 - 1-6006-0008-000 Power Supply.

AC adapter. Output: 7.5VDC 30mA.

Input: 120VAC 60Hz.

Mount: wall plug-in with 6' cord and 5.5" barrel connector, 2.0mm ID.

Note: Double marked AM391 and SS-75031-N.

Listed: UL.

Learn More

MDI - GB20W1000 Mechanical Float Switch, Normally Open These high quality float switches are designed for pump duty high temperature loads. The float switch is as normally open or pump down (circuit is complete when the float is elevated). The float cord is intended to be attached to a vertical pipe a band clamp, cable tie or tether clamp. As an option the float can be installed with a cable weight as the pivot point. This float has skived ends, where the insulated wire leads inside the cable are intended to be wired into other system components inside a junction box. MDI float switch was designed for extra nasty locations where there is sewage and suspended solids. Normally Open switch hanging downward from the cord closes when the float rises 45 degrees above horizontal and remains closed until the float drops 45 degrees below horizontal. High Temperature Pump Duty Mechanical Float Switch Precision Molded Float. Contacts: 13A@120/240VAC, 1/2HP. Normally Open Contacts. Sealed and approved for septic and sewage systems. Chemical Resistant Blue Non-Toxic 1010 Polycarbonate/ABS. Max. Operating Temperature: 180F/82C, 10ft/16-2 SJOW Cord. Float Body Dimensions: 4.625” Length x 2.625” Diameter Exceeds Dayton Float Switches Specifications. Alternates: GF2OW2000, PT3OT2000, HF20U4000W Applications: Sump Pump, Lift Station, pump Control, Septic Tank, Alarm. UL, CSA & CE Approved Proudly Made in USA. Retails for over $60 Learn More

IC. Micropower comparator +1.0V. Package: SMD SOT-23. Rohs compliant. Learn More

Oscillator. 4MHz. Operating voltage: 2.7 to 5.5V. Package: SMD SC70-3, 3 pin. Note: Silicon. Operating temperature: -40 to 125 Deg C. Learn More

IC, DC/DC charge pump converter. Primary input voltage:5.5V. Number of outputs:1, Output voltage:11V. Output current:100mA. Operating temperature range:-40�C to +85�C. Input voltage primary max:5.5V. Package: 8 Dip. Learn More

MAXIM - MAX6350CSA - Voltage Reference.

MAX6350 are low-noise, precision voltage references with extremely low, 0.5ppm/°C typical temperature coefficients and excellent, ±0.02% initial accuracy. These devices feature buried-zener technology for lowest noise performance. Load-regulation specifications are guaranteed for source and sink currents up to 15mA. Excellent line and load regulation and low output impedance at high frequencies make them ideal for high-resolution data-conversion systems up to 16 bits.

♦ Ultra Low, 1ppm/°C Max Tempco
♦ ±0.02% Initial Accuracy (MAX6350)
♦ ±15mA Output Source and Sink Current
♦ Industry-Standard Pinout
♦ Optional Noise Reduction and Voltage Trim
♦ Excellent Transient Response
♦ 8-Pin SO Package Available
♦ Low, 30ppm/1000hr Long-Term Stability
♦ Stable for All Capacitive Loads

Precision 1ppm/C

Low-Noise

+2.5V/+4.096V/+5V.

Operating Temperature: 0 to 70 Deg C.

Package: SOIC 8.

Applications: High-Resolution Analog-to-Digital, Digital-to-Analog Converters,High-Accuracy Reference Standard,High-Accuracy Industrial and Process Control,Digital Voltmeters,ATE Equipment, Precision Current Sources.

Learn More

IC. 6 I/O Ports. Low-capacitance, 2/3/4/6-channel, 15kV ESD protection arrays for high-speed data interfaces. Package: SMD. Learn More

Vacuum gauge. 2" Fig 22 30" 1/8" Bott conn. Black steel case, 2-1/8" D x 1" deep. NIB. Learn More

Switch, pushbutton, operator housing only. Contact Ratings: 120VAC. Actuator: illuminated. Mech: Panel. NIB, with installation instructions. Learn More

HONEYWELL MICROSWITCH - LSF3K4 - Switch, Limit with Roller.

Status: Discontinued

Contact Ratings: 600VAC 10Amp (600VAC pilot duty).

Current Rating: 10 A

Differential Travel: 635 µm

Operating Temperature: -12 °C to 93 °C

Orientation: Right Angle

Overtravel: 4.826 mm

Pretravel: 2.54 mm

Switch Function: On-Mom

Termination: Screw

Throw Configuration: SPDT

Voltage Rating (AC): 120 V

Voltage Rating (DC): 115 V

Dimensions; Depth 65.8 mm, Length 39.6 mm

RoHS: Compliant

Mech: Panel, with two #10 screws from front or two #10/32UNF screws from the back.

Note: Heavy duty LS limit switch

NEMA A600.

New in Box with installation instructions.

Alternate: 3LS5

Proudly Made in USA

Learn More

MICROSWITCH - 3LS5 - Switch, Limit, Precision with roller/actuator head.

Contact Ratings: 10Amp 120, 240 or 480VAC.

Mech: Panel.

Note: Compact "LS" type. NIB, with installation instructions.

Alternate: LSF3K4

Proudly Made in USA

Learn More

IC, microcontroller. 8 Bit CMOS. Package: 40 Dip. New. Learn More

IC. Single/Dual low-voltage, low-power �P reset circuits. Package: SC70 (SOT-343) SMD. Learn More

MAXIM - MAX3233ECWP - IC. Dual RS-232 Transceiver.

5kV ESD-Protected, 1A,

Data Rate: 250kbps,

Operating Voltage: 3.3V/5V,

with Internal capacitors.

Package: 20 SOIC SMD, Wide. (0.295", 7.50mm width).

Learn More

MAXIM - MAX333CWP - IC. Quad SPDT CMOS Analog Switch.

Package: 20 SMD wide.

Learn More

Crystal. 6.00MHz. Tolerance: 0.5%. Ceramic resonator. Package: SMD. Learn More

Relay, electromechanical. DPDT 1Amp 4.5VDC, 145 Ohm. Coil current: 31mA. Coil power: 140mW. Package: 8 pin Dip. Note: Electromechanical. Learn More

Power Supply. Output: 0 to 1.1V(kV), 12mA 15 watt. Mount: PCB or Panel. Enclosed. Package/ case: C6. Dimensions: 4.75" long x 4" wide x 1.353" high, with four mount feet at 5-13/16" centers. Note: High Voltage. Learn More