Featured Products

MATRIX SCIENCE - M39029/59-366 Connector, pins.

Coax, STK 8 GA.

Dimensions: overall 0.035" D x 1.193" long.

Pin length: 0.219".

Material: gold.

Military: 5700-012-0000, NSN 5999-01-032-0123.

Supercedes MS27535

Unit Weight 0.5 Oz

NSN 5999-01-032-0123 TECHNICAL CHARACTERISTICS

Learn More

MICRO PLASTICS - MPS0100-22DS4X9 - Connector, PCB Edge.

Housing Gender: Receptacle.

Contact Gender: Female.

Circuit Count: 22 Position, 44 Pin (double row).

Mount: PCB, w/o Mounting Ears.

Dimensions: 2.521" Long x 0.327" Wide x 0.430" above board.

Learn More

MELTRIC CORP - 63-14073 - Connector.

DSN1 Receptacle, Female. 3 Phase.

250VAC 20Amp, 60Hz.

Item Number:  63-14073-NC

Series: DSN20

Aux/Pilot Contacts: None

Wire Size Range:12 AWG~14 AWG

Terminal Type: Screw

Case Material: Non-Metallic

Voltage Color Code: Orange

Temperature Range (F): -40 to 140 Degrees F

NEMA Rating: NEMA 4X

IP Rating: IP66/IP67 

Approvals: cUL; CSAus

Dimensions: H x W x D:3.1 in x 2.3 in x 3.15 in

 Net Weight: 6 oz

Deconactor. Lightweight Fiberglass Housing.

Can be disconnected under full motor load safely.

Note: Waterproof.

Alternate: 63-14073-NC

Proudly Made in USA

Learn More

MARQUARDT GMbH - 1821 1101 Switch, Toggle with 343.001.023 Weatherproof Boot.

Marquardt 1820 series toggle switches are suitable for use in Class II appliances. A black Neoprene® lever cover which simply screws onto the toggle switch M12x0.75mm bush is available to protect the actuator from dust and water ingression.

Contacts: SPST ON/OFF.

Contact Ratings: 6Amp 125/250VAC.

Connection: Two 3/16" Male Quick Connect Terminals, or maybe soldered.

Mech: Panel, Snap-in.

Body: ThermoPlastic Glass Fiber Reinforced

Color: Black.

Overall 0.943" Long x 0.648" wide.

Behind Panel 0.808" Long x 0.476" wide.

Note: With Weatherproof Neoprene® Boot.

Threaded Bushing Length: 0.308".

Operating Temperature: -20 C to 55 C

Life Cycles: 50,000

Actuator Length: 0.542".

Rohs Compliant

Alternate: Mouser  979-1934-3114 Switch 

MARQUARDT GMbH - 1821 1101 Switch, Toggle with 343.001.023 Weatherproof Boot.

Marquardt 1820 series toggle switches are suitable for use in Class II appliances. A black Neoprene® lever cover which simply screws onto the toggle switch M12x0.75mm bush is available to protect the actuator from dust and water ingression.

Contacts: SPST ON/OFF.

Contact Ratings: 6Amp 125/250VAC.

Connection: Two 3/16" Male Quick Connect Terminals, or maybe soldered.

Mech: Panel, Snap-in.

Body: ThermoPlastic Glass Fiber Reinforced

Color: Black.

Overall 0.943" Long x 0.648" wide.

Behind Panel 0.808" Long x 0.476" wide.

Note: With Weatherproof Neoprene® Boot.

Threaded Bushing Length: 0.308".

Operating Temperature: -20 C to 55 C

Life Cycles: 50,000

Actuator Length: 0.542".

Rohs Compliant

Alternate: Mouser  979-1934-3114 Switch 343.001.023 Boot

Approvals: UL; CSA; ENEC

Made in Germany

Approvals: UL; CSA; ENEC

Made in Germany

Learn More

Honeywell - Micro Switch - 1PB871 Switch, SPST Mechanical Push Button Keyboard /Keypad Switch. 

The 1PB871 "One-Shot" keyboard switch containing an internal 311SM29 microswitch. The microswitch has hysteresis, with a release point around 0.3 to 0.4 mm higher. 

Contacts: SPDT One Shot.

Contact Ratings: 5Amp.

Total Travel: 5 mm

Actuation of the internal 311SM29 microswitch occurs at approximately 2.0 to 2.5 mm into switch travel.

Note: Depressing the actuator actuates the contacts for just milliseconds.

Application: Univac Keyboard 4118511-01 and others.  

NO Knobs or Keycap included.

 

Learn More

IC, operational amplifier. Chopper stabilized, +/-15V. Package: TO-99 gold with lead protectors. Spec sheet available.

Learn More

MICROMETRICS - 1N79 Microwave Diode, High Frequency.

A two electrode semiconductor device having an asymmetrical voltage - current characteristic.

Microwave S Band. f(test) test frequency = 3.0GHz (3,000 MHz)

Meter Rectifier 100V, 10A

Semiconductor Material: Silicon Crystal Diode

Enclosure: Glass and Metal 

Mounting Method: Press-Fit

Features: Hermetically Sealed DO-22 Gold Stud

Terminal Type: 1 Ferrule and 1 Flange.

Genuine Micrometrics - New Old Stock - Rare

Bird P/N: 2500-180.

NSN: 5961-00617-4983

Learn More

MAXCONN Mill-Max - 5-418-2 – PLCC IC Sockets, Thru-Hole 0.100”, 84 Position Gold. Plastic leaded chip carriers (PLCC) sockets are a type of chip carrier used to form connections between integrated circuits (ICs) and printed circuit boards (PCBs). Internal standoffs ensure proper positioning of chip carrier in socket Standoffs provide clearance for heat dissipation and cleaning Insulator material is glass reinforced PPS Standard: 0.100" (2,540mm) Pitch Accepts JEDEC PLCCs MS-016 & MS-018 leaded plastic substrates Mounting Type: Through Hole Solder Mount 84 PLCC Leadless Chip Carrier. 84 (4 x 21) Pos PLCC Through Hole Contacts: Gold Inlay. Alternates: 3M 8484-11B1-RK-TP, Mill-Max 940-44-084-24-000000 Note: Due to cost, Mill-Max no longer makes 84 pin sockets with Gold Inlay. Current production is limited to P/N 940-44-084-24-000000 having less expensive Beryllium Copper contact material. New Old Stock Made in USA Learn More

MICRO DEVICES - LL61501 Switch, Temperature.

A Thermal Fuse or Fusable Link is a cutoff which uses a one-time fusible link. ... Unlike electrical fuses or circuit breakers, thermal fuses only react to excessive temperature and not to excessive current (unless the excessive current is sufficient to cause the thermal fuse itself to heat up to the trigger temperature). This fuse breaks the circuit when the temperature exceeds 150C.

Micro Thermal fuse, 150 Deg C. (300 F)

Package: Epoxy Molded, Radial Leads.

Dimensions: 6.8mm wide x 2.5mm deep x 11.2mm high.

Lead spacing: 4.2mm.

Alternates: G4AO1152C, D150-002, 4300A1, LL61501, WP3392519

Learn More

Meproelectric - 8311000 AC/DC Power Supply, Adapter. Input 120VAC 60Hz 11VA Wall Mount Output 12VDC 300mA ( 0.3A) Class 2 Barrel Connector Center Positive (+) with a 5.5/2.4mm female plug at end of cord. Enclosed, White. UL Approved Learn More

Relay, time delay. Contactor: 240VAC 10A. Coil: 24VDC. Connection: Octal. Electrical conf: DPDT. Body: 1.75 x 2.4 x 3.6" above socket. Weight: 5 oz. Time delay: 0.1 sec - 2 hrs. 16-Ranges via four top-mounted DIP switches. Min/max Control pot on top. Upon application of the control voltage (24) the relay contacts transfer for the preset time, then switch back. Input voltage must be removed and reapplied to reset the time delay . Learn More

Register File (Static RAM) - 5 Port Reg File. Number of Words = 8, Bits Per Word = 8, t(acc) Max. (S) = 35n, tW Min (S) = 45n, P(D) Max.(W) Power Dissipation = 60m, Nom. Supp (V) = 5.0,Package = 64-PGA New ceramic gold Learn More

Relay, power. Input: DC. Contacts: 3PDT. Contact Ratings: 11Amp. Coil Voltage: 110VDC (120VAC/28VDC, 11A 240Vac UL, 6A 240VAC CSA, 1/3HP 120VAC, 1/2HP 240VAC). Connections: 3/16" male QC terminals, socket or solder. Mech Mtg: PCB or socket. Packaging: Plastic enclosed. Note: Made in the USA. Learn More

Relay, control. Input: DC. Contacts: 2 (NC) 1 (NO) 1 (SPST). Contact Ratings: 10Amp. Coil Voltage: 125VDC. Coil Current: 20 mA (latch) /15mA (reset). Coil Resistance: 6250 Ohms (latch) /8400 Ohms (reset). Pickup/Dropout: Maximum pick-up 100VDC. Connections: 12 Pin base Plug-In. Packaging: Enclosed. Note: B255 Series, 219 style, 2 Coil latching. Factory new, each NIB. Made in the USA. Coil marked 45570-43C. Learn More

MAGNECRAFT/S&D - A314XCX48P-125D Relay, Power.

Status: Discontinued

Input: DC, General Purpose

Contacts: 3PDT.

Contact Ratings: 10Amp.

Coil Voltage: 125VDC.

Coil Resistance: 1K Ohm.

Connections: 11 octal plug-in.

Packaging: Enclosed.

Note: (10Amp 120VAC, 10Amp 240VAC, 1/3HP 120V, 1/2HP 240V, 10Amp 28VDC).

Alternate: KRPA14DG-125, KRPA14GF-125D

New Old Stock

Learn More

Relay, control. Input: AC. Contacts: 4PDT. Contact Ratings: 1Amp. Coil Voltage: 24VAC (1Amp 120/240VAC, 30VDC). Connections: solder terminals. Mech Mtg: PCB. Packaging: Hermetically sealed case. Note: Contacts: Bifurcated. Qualified for Class 1, Division 2 hazardous locations. NIB. Learn More

Relay, control. Input: AC. Contacts: 4PDT. Contact Ratings: 1Amp. Coil Voltage: 240VAC (1Amp 120/240VAC, 30VDC). Connections: solder terminals. Mech Mtg: PCB. Packaging: Hermetically sealed case. Note: Contacts: Bifurcated. Qualified for Class 1, Division 2 hazardous locations. NIB. Learn More

Relay, control. Input: DC. Contacts: 4PDT. Contact Ratings: 1Amp. Coil Voltage: 12VDC (1Amp 120/240VAC, 30VDC). Connections: solder terminals. Mech Mtg: PCB. Packaging: Hermetically sealed case. Note: Contacts: Bifurcated. Qualified for Class 1, Division 2 hazardous locations. NIB. Learn More

LUCIDYNE - 1022A - AUTOMATIC VOLTAGE CONTROL BOARDS

900619-101 PC BD 900619

Rwmote Front Panel

Note: Lucidyne acquird by Microtec

Learn More

Board. Military assembly with Burndy connector M55302/7-03, NSN 5935-00-530-4650. Learn More

Board. Military assembly with Burndy connector M55302/7-03, NSN 5935-00-530-4650. Learn More

Threaded TNC F receptacle to Right Angle RG58 COAX - appears to be Black anodizing over heavy Copper - highest quality Learn More

MAJOR - NE-2 with Resistor Lamps, Neon.

A neon lamp (also neon glow lamp) is a miniature gas discharge lamp. The lamp typically consists of a small glass capsule that contains a mixture of neon and other gases at a low pressure and two electrodes (an anode and a cathode). When sufficient voltage is applied and sufficient current is supplied between the electrodes, the lamp produces an orange glow discharge. The glowing portion in the lamp is a thin region near the cathode; the larger and much longer neon signs are also glow discharges, but they use the positive column which is not present in the ordinary neon lamp. Neon glow lamps were widely used as indicator lamps in the displays of electronic instruments and appliances. They are still sometimes used for their electrical simplicity in high-voltage circuits.

Glow Lamps, 2 Electrodes that Glow Orange when 115VAC is applied.

Has a 30K ohm resistor in series with one lead and both wire leads are insulated with tubing.

Case: 0.24" D x 0.64" long, glass envelope with wire leads, 2" + 3.5" wire leads.

Shape: T2

Power: 0.25 W

Voltage: 105 to 125 V

Life: > 25,000 Hours

Proudly Made in USA

 

Learn More

Rollers, 14mmD. Work rollers, material: CPM REX 76. Tips 4.4mm thick with 3.0mm flat top. Lonero Engineering - Deep Rolling Tool Specialists. Learn More