Featured Products

Agilent Hewlett Packard - HLMP-2655 - LED. High Efficiency Red Light Bar / Graph. 

The HLMP-2XXX series light bar light source is designed for a variety of applications where a large bright source of light is required. The light bars is configured in a dual-in-line package.

Status: Discontinued

LED. Bar Graph, Wavelength: 626nm

Forward Voltage: 1.8V @ 25mA

Light Emitting Area: 0.350" x 0.350"  (8.89 x 8.89mm)

Housing Height: 0.25in

Housing Width: 0.40in

Lead Spacing: 0.10in

2V 20mA.

Luminous intensity: 45mcd.

Series: E.

Color: High Efficiency Red.

Package: 8 Dip.

RoHS Compliant.

Alternate: Broadcom HLMP-2655

 

Learn More

Hewlett Packard Agilent - HLMP-1440 - LED. 2.1V 20mA.

Technology: GaP.

Luminous intensity: 45mcd.

Wavelength: 585nm.

Viewing angle: 45 Deg.

Lens shape: round T1.

Color: Ultra bright yellow.

Rohs Compliant.

Package of 10.

Learn More

IC, optocouplers. High speed 10MBit/s logic gate. Package: 8 Dip. Learn More

IC, operational amplifier. Package: 14 Cdip, socket pulls. Learn More

GRAYHILL - 97S04SR - Switch, Dip. 4 Position SMD. The Grayhill 97S04SR is a 4-position, surface-mount (SMD) DIP switch from Grayhill's Series 97, designed with a half-pitch (0.050") footprint to save board space. Grayhill While the exact "97S" designation is often found in older inventory or specific surplus listings, it is closely related to the current Grayhill 97C04SRT and Grayhill 97R04SRT models, which share most core electrical and mechanical specifications. Technical Specifications • Circuitry: Single Pole Single Throw (SPST). • Switch Rating: 25 mA at 24 VDC (switching); 100 mA at 50 VDC (non-switching). • Mechanical Life: Rated for 1,000 cycles. • Actuator Type: Top recessed slide. • Mounting: Surface mount with gull-wing terminals. • Pitch: 0.050 inches (1.27 mm) half-pitch centers. • Operating Temperature: Ranges from -40°C to 85°C. • Environmental Protection: Features a tape seal for assembly process compatibility up to 260°C. Key Features • Compact Design: Uses approximately half the board space of a standard DIP switch due to its 0.050" pitch. • Reliability: Features gold-plated copper alloy contacts for consistent electrical performance. • Process Compatibility: The tape seal allows it to withstand standard cleaning and soldering processes. Purchasing and Availability Alternatives: The Grayhill 97C04SRT is the current active replacement The 97S04SR variant is frequently listed as "Obsolete" or "Not Recommended for New Designs" on major distributor sites like DigiKey, though it remains available through surplus and specialty retailers. Actuator: Off-On. Mech: PCB SMD gull wing. Note: T/R. Learn More

GRAYHILL - 97S08R Switch, SMD dip.

Contacts: SPST 8P.

Contact Rating: 100 mA at 50 Vdc non-switching; 25 mA at 24 Vdc, 10 mA at 50 Vdc switching.

Actuator: Top Actuated, Recessed Slide On/Off. Series 97.

Pitch spacing: 1.27mm.

Mech: SMD.

Body: overall length 0.450".

97S08R Part number w/o tape seal.

Learn More

Harris Corp - IRFF122 Transistor, N Channel MOSFET.

Max voltage: 100VGS.

Max current: 5Amp.

Dissipation: 20 watt @ 25 Deg C.

Package: TO-205AF (low profileTO-39).

Operating temperature: -55 to 150 Deg C.

Note: Enhancement mode silicon-gate power MOS. RDS on: 0.40 Ohm.

Learn More

IC, operational amplifier. 850MHz, low distortion current feedback. Package: 8 SOIC SMD. Note: Manufacture Harris / Intersil. Learn More

IC. Video buffer, 250MHz bandwidth. Unity gain monolithic. Package: TO-8-12 gold leads. Operating temperature: 0 to 75 Deg C. Note: Harris is now Intersil. Learn More

SCR. Input: 3.3-32VDC. Output: 5VDC Logic. 30VDC 50Ma. With LED. NIB. Learn More

IC, operational amplifier. Package: 14 Cdip gold leads, socket pulls. Learn More

IC, CMOS. Parallel Interface. Package: 44 PLCC. Learn More

Diode. 1Amp 200V. Package: DO-204AP axial leads. Note: Glass passivated junction rectifier. Package of 10. Learn More

Mersen GOULD/SHAWMUT - 69082 - Connector, Power Distribution Block, Terminal Block 380A.

The Next Generation Power Distribution Block (PDB). Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. All blocks are UL and CSA approved while meeting spacing requirements for feeder and branch circuits in conjunction with UL508A and the National Electrical Code®.

This efficient aluminum block splices cables or splits primary power into a wide range of secondary circuits and provides a fixed tap-off point. It accepts aluminum or copper wire, and saves splicing and taping time for contractor rework.

PDB 2P. (1) 500MCM-#4 X (12) #4-#14. 600V CU9AL.

No. of Poles: 2

Amps (AC): 380 Amps

No. of Inputs per Pole: 1

No. of Outputs per Pole: 12

Line/Load Connection: Box Lug/Box Lug

Mounting Type: Panel Mount

Input Wire Range: 500 kcmil~4 AWG

Output Wire Range: 4~14 AWG

Includes Cover: No

Voltage (AC):600 Volts AC

Composition: Glass-Fill Polycarbonate

Color: Black

Approvals: UR; CSA

Dimensions: H x W x D:5.35 in x 5.31 in x 3.91 in

UPC 782001655655

Mersen, formerly Ferraz Shawmut

Applications: Splicing cables, Splitting primary power into secondary circuits, Fixed junction tap-off points

Learn More

Mersen GOULD/SHAWMUT - 69002 - Connector, Power Distribution Block, 545Amps, PDB 2Pole.

PDB 2P 1000-250MCM

MPDB69 Series 

600V CU9AL.

Note: Splicer Block

2-Pole, 545Amp

Bx/Bx Line:(1)1000MCM-250MCM Box Lug

CuAl Load:(1)1000MCM-250MCM Box Lug

CuAl. UL, CSA

Mersen, formerly Ferraz Shawmut

Applications: Splicing cables, Splitting primary power into secondary circuits, Fixed junction tap-off points.

Learn More

Cable, replacement part. With 4 BNC males and 1 DB15 male.

Learn More

Hand-Held Remote Controller. Serial interface. 32 character LCD display arranged in 2-lines of 16 characters. It enables you to transmit and receive data in serial ASCII code using its keyboard and interface. The keyboard has 40 keys: Using the "Shift" and "Control" keys you can use it to generate all 128 ASCII codes. It communicates in either simplified RS232, RS422/3 or 20 mA current loop via a DB25F connector. Capable of transmitting and receiving all 128 ASCII codes.Complete with 60-page instruction manual and 17-foot cable DB25P to DB9P cable. Learn More

HR2000 HIGH RESOLUTION HARD COPY BOARD FOR ES2000Socketed chips: AM29368GC Ceramic - AM2130-70PC - others Learn More

PB440 Four (4) channel analog input, plug-in with cable set X52877.Has a Datel ADS-132MC 12 bit sampling analog converter IC, hermetically sealed, in a socket, 32 Cdip. Plus four pieces AD7537JN IC's. Learn More

GOULD - 23-21101-02 PB440 NEW PLUG INS with DB15S for TTL and 4 front panel BNC jacks also being sold for parts: ADS132MC + 4pc AD7537JN + AD841JN + 3 XILINX parts all in sockets

Learn More

IC, memory. SRAM 4096-Bit. Package: 18 Cdip. Learn More

Harris Corp - CD4024BE - IC, CMOS.

7 Stage Ripple-Carry Binary Counter/Divider.

Package: 14 Dip.

Note: Texas Instruments acquired Harris Corp CD4000 Series product line in 1998.

Learn More

GRAYHILL - 50CD36-01-1-AJN Switch, rotary.

Contacts: SP10T.

Contact Ratings: 200mA 125VAC (220VAC/28VDC).

Connection: Solder.

Elect config: Panel, Bushing.

Panel hole: 0.5" D. Shaft: 1/8" D, Flattened x 0.375" long.

Note: Miniature. One pole/one deck.

Non-Shorting.

Angle of throw: 36 Deg.

Learn More

Switch, rotary. Contacts: 4PDT 12 Position. Contact Ratings: 1Amp 115VAC. Connection: solder terminals. Mech: panel. Body: 1" Diameter. Note: With adjustable stop. 30 Degree indexing. More info: http://www.grayhill.com/web1/images/ProductImages/Rotary_42,43,44,54.pdf Learn More