Featured Products

SCR, silicon controlled rectifier. Gate turn-off thyristor. 250Amp 1200V. Package: DO-200AA, outline code E hockey puck, double sided cooling. Used/Removed from equipment. Learn More

Video sync seperator. Complete with operator's manual.

Learn More

Diode. 100V 300mA. Dissipation: 400mW. Fast switching. Material: molded plastic. Package: SOD-123 SMD. Learn More

DII - 1N4150 - Diode.

Ratings: 50V 200mA.

Dissipation: 500mW.

Package: DO-35 axial leads.

Note: Silicon epitaxial planar.

Switching.

Package of 5.

Learn More

Connector, IDC. Housing gender: receptacle. Contact gender: female. Circuit count: 40 (2 Rows). Mounting type: panel, free hanging. Pin spacing: 0.1" pitch. Connection: Wire: Discrete or Ribbon Cable, 24-22AWG. Contact plating: gold. Note: Closed End, Polarizing Key. Lead free. Rohs compliant. Learn More

Die-Cut Products Co - CorkOne Hardware, Washer. Cork.

Aerospace Quality manufactured by the premiere US based manufacturer of specialty die cut products.

Solid cork is the cost effective, easy choice for many applications. 

Dimensions: 1" D x 0.063" thick, with an ID of 0.191" D.

Package of 30.

Learn More

Relay, electro-mechanical. Mark II. 6PDT, Coil: 26.5VDC, 200 Ohms. Connections: solder hooks, Packaging: hermetically sealed. Learn More

EDAC - 322-044-524-258 - Connector, Edge Card.

22 position/44 Pin (2 Rows).

Pitch: 0.156". With Card guide

Contact Plating: Gold.

Card Thickness 0.062" (1.57mm).

Pitch: 0.156" (3.96mm).

Mount: PCB.

Termination: Solder.

Genuine EDAC - Difficult Edge Connector to Find

Alternates: Newark 88F1095, Mouser 587-322-044-524-259

Learn More

Crystal. 24.000MHZ. Package: SMD. Learn More

Diodes Inc - DII - SMAZ15-13 - Diode, Zener.

15V 1 watt.

Tolerance: 5%.

Package: DO-214AC SMD.

Package of 25.

Learn More

Diode, zener. 10V 1 watt. Tolerance: 5%. Package: DO-214AC SMD. Package of 25. Learn More

DII - S1D-13 - Diode.

Ratings: 1Amp 200V.

Ultra Fast.

Package: DO-214AC SMD.

Package of 10.

Learn More

DII - DL4005-13-F Diode.

Status: Discontinued

1Amp 600V.

Package MELF SMD.

Rohs Compliant.

Package of 10.

Learn More

DII - B240A-13-F -Diode, 2Amp 40V.

Average Rectified Current: 2 A

Capacitance: 200 pF

Current Rating: 2 A

Element Configuration: Single

Forward Current: 2 A

Forward Voltage: 500 mV

Max Forward Surge Current (Ifsm): 50 A

Operating Temperature: -65 °C to 150 °C

Max Repetitive Reverse Voltage (Vrrm): 40 V

Max Reverse Voltage (DC): 40 V

Packaging: Cut Tape

Peak Non-Repetitive Surge Current: 50 A

Peak Reverse Current: 500 µA

Schottky, Fast Recovery.

Package: DO-214AC SMD.

Package of 10.

Learn More

EMPRO - MLB-300-50 - MSB301 - NSN: 6625-00-166-1005 - Shunt - Shunt. 300Amp 50mV. These shunts are used when size and weight are a major design consideration. They comply with MIL-S61-B and commercial item description AA55524. A commercial shunt designated by Empro as Type MLB. These shunts are used when size and weight are a major design consideration. These shunts comply with MIL-S61-B and commercial item description AA55524. • Accuracy: 1/4% • Recommended continuous operation: <2/3 rated current • Amp300 • Type: MLB, 50 mV • NSN: 6625-00-166-1005 • Dimensions: Length (in)3.25 Width (in)1.75 Removed from Equipment Learn More

EMPRO - MLB-250-50 - MSB 251 – Shunt, Used / Removed From Equipment. The EMPRO MLB-250-50 is a commercial-grade DC ammeter shunt designed for applications where size and weight are critical considerations. It is the commercial equivalent of military-standard shunts like the MS91587-2 or MSB251 and complies with the AA55524 commercial item description. A commercial shunt designated by Empro as Type MLB. These shunts are used when size and weight are a major design consideration. Technical Specifications • Current Rating: 250 Amperes. • Voltage Drop: 50 Millivolts (at full rated current). • Accuracy: (0.25%) under standard conditions. • Shunt Resistance: 0.0002 Ohms. • Continuous Operation: Recommended at less than 2/3 of the rated current to prevent overheating. Physical Dimensions • Overall Length: Approximately 3.25 inches. • Overall Width: Approximately 1.75 inches. • Overall Height: Between 1.720 and 1.780 inches. • Mounting: Features two unthreaded mounting holes, typically 0.190 to 0.220 inches in diameter, with a center-to-center distance of approximately 1.25 inches. Made in USA Learn More

EMPRO - MLB 170-50 Shunt. MSB171

A commercial shunt designated by Empro as Type MLB. These shunts are used when size and weight are a major design consideration. These shunts comply with MIL-S61-B and commercial item description AA55524.

170Amp 50mV.

0.00029411 Ohms

Learn More

Connector, IDC. Housing gender: receptacle. Contact gender: female. Circuit count: 96 Position (32 x 3). Mounting type: PCB RA. Pin spacing: 0.1" (2.54mm). Note: Style R. Din 41612. Learn More

Crystal. 18.432MHz. Package: SMD. Learn More

Crystal. 3.6864MHz 18pF. Marked 3.68ECSXR. Package: HC49U/S metal can. Learn More

Switch, pushbutton. Contact Ratings: 10Amp 600VAC. Actuator: momentary. Mech: panel, 0.885" (22.5mm) diameter hole. Note: P/B switch actuator Only, for series 04 oil and watertight switches. Diffuser: white. Learn More

E F JOHNSON CO - 115-254 - Hardware.

Flexible Drive Shaft.

Description: copper, brass and phosphor bronze shaft 

Dimensions: 1/4" D x 6" long.

Military NSN 3040-00-816-5586.

Alternate Part : 115-254 Viking Technologies Ltd.

Learn More

Diode, zener. 7.5V 500mW. Tolerance: 5%. Case: SMD. Package of 50. Learn More

Diode, zener. 5.6V 20mA 500mW. Package: MiniMELF leadless SMD. Note: Silicon planar. Learn More