Featured Products

Overload heater coil element. Learn More

Overload heater coil element. Learn More

Overload heater coil element. More info: page 13 http://www.eaton.com/ecm/groups/public/@pub/@electrical/documents/content/tb03305001e.pdf Learn More

Heating element. For overload relays/contactors. 1.13 - 2.55Amp. Note: Alt P/N: 25-107-671-018. Note: Maybe replaced with equal by Allis-Chalmers. Learn More

Overload heater coil element. Learn More

Overload heater coil element. Learn More

Overload heater coil element. Learn More

Overload heater coil element. Learn More

IC, memory. 128K x 8 SRAM. Package: 32 SOJ/TSOPII SMD, Used/Removed from equipment. Learn More

Relay, timer. Contacts: DPDT. Contact Ratings: 10Amp. Coil Voltage: 115VAC. Connections: 8 solder hooks. Mech Mtg: Panel, flange 2.699" (68.5mm) square with 3" centers. Packaging: Enclosed, hermetically sealed. Size: 2.546" (65mm) D x 4.193" (106mm) high. Note: Probably 30 minutes. Motor 60 cycles. Time delay relay. Learn More

Relay, timer. Contacts: SPDT. Contact Ratings: 5Amp. Coil Voltage: 115VAC. Connections: 8 solder hooks. Mech Mtg: Panel, flange 2.699" (68.5mm) square with 3" centers. Packaging: Enclosed, hermetically sealed. Size: 2.546" (65mm) D x 4.193" (106mm) high. Note: 3 Second set. Motor and clutch 60 cycles. Time delay relay. Learn More

Package of 20 - Hammer / Eaton - 30-5632-4 - ON/OFF Vertical Legend Indicating Plate for 15/32" Toggle Switches. ON/OFF Silver Vertical Legend Plate for Standard 15/32" Bushing Toggle Switches. Material: Steel Finish: Burnished Nickel Finish ON-OFF Marking (Stamped) Keyway by OFF (Bottom). Alternates: Newark P/N 23F248 Dimensions: 1.0" x 0.625” x 0.032”. New Old Stock Learn More

Cutler-Hammer / Eaton - E59RP1A2 - iProx Remote Programmer

iProx Sensors are programmed through a remote programming device. This is the device, attached magnetically to the black face cap of the iProx sensor allowing you to teach base level and application parameters to the sensor.

Magnetic Remote Programmer Cable, E59 Series. Connects to computer via a RS-232 connection. Required for Programming Iprox E59 Series Sensors.

The iProx Proximity Sensor represents the highest performance, most versatile tubular inductive sensor offered by Eaton's electrical sector. By utilizing an embedded microprocessor and exclusive SmartSense technology, iProx can sense up to three times farther than typical sensors of its class, while providing an unheard-of level of customization.

Both shielded and unshielded versions of iProx feature extended sensing ranges. This allows the sensor to be mounted farther from the target, thereby reducing the potential for target impacts and increasing the sensing reliability of your application.

The iProx also includes a wide range of advanced features that can be enabled via optional programming tools. Using the ProxView Windows-based software package, an entirely custom sensor can be programmed to perfectly fit an application.

Sensor characteristics, such as sensing range, can be customized down to the nearest tenth of a millimeter. Outputs can be changed from NO to NC. The iProx even features built-in timing delays and speed detection logic. No PLC programming is necessary.

With extended sensing range, quality construction and the ability to adapt to its environment, iProx is the ideal choice for even the most demanding inductive sensing applications.

iProx Proximity Sensor Features:

• Reliably detect metal targets at up to three times the range of conventional shielded or unshielded tubular inductive sensors
• Auto-configure technology automatically detects a sinking (NPN) or sourcing (PNP) connection and switches the sensor accordingly, without any user intervention
• Exclusive SmartSense embedded microprocessor technology allows for customizable range, band sensing, nuisance metal rejection, timing delays and over/under speed detection
• Optional computer programming cable and Windows-based ProxView configuration software makes it easy to customize sensors
• Quality construction using a stainless steel barrel, 360-degree dual-color LED indicator, Ryton impact-resistant face cap and vibration-absorbing potting compound
• Withstands high electrical noise (up to 20 V/m)

 E59RP1 Series A2.

Note: Softward Dics purchased separately.

UPC: 782113761760

Learn More

Cutler-Hammer / Eaton - E52-18RU04-B1 - Switch, Proximity. Inductive 4mm N.C. PNP. Type: Inductive Proximity Sensor Contact Rating: 100 mA Cable Type: PVC Contact Configuration: NC PNP Open Collector Cord Length: 2 M Enclosure Material: PBT Composition Environmental Rating: NEMA 1, 2, 3, 3S, 4, 12, IP66l Input Voltage: 10-30 Vdc Led Indicators: LED Indicator Operating Mode: Unshielded Operating Temperature: -13° to 130°Fl Protection: S/Cl, Series: E52 UPC: 782114013229 Dimensions: Height: 0.39” X Length: 1.18” X Width: .71” Weight:.15 LB Learn More

Panel operator, green pushbutton, flush mount 25mm. Set of green operator, sealing washer & mounting nut, mounting adaptor. Requires E22B contact blocks.

Learn More

Rapid mounting tool RK254. Material: plastic, black. Learn More

Terminal block. Pull apart, sectional, end. Learn More

Contactors. Clear plastic cover, snap on/locking. Learn More

Circuit breakers. Hardware, padlockable. Learn More

Circuit breaker. 1P 5Amp 277VAC. Supplementary Protector. Learn More

D100CRA20 I/O PLC, 13 AC-Inputs/8 Relay Contact Outputs, 1440VA per Output Contact. No memory cartridge in location. Dimensions: 9.5 x 5 x 4.5"H. Weight: 3 lbs. Learn More

CTI AUDIO INC / Omnitronics - 41543-03-00 - Microphone Square Grille Mesh Cover Replacement, Audio, Microphones. Windscreen. The CTI Audio Inc / Omnitronics 41543-03-00 Microphone Square Grille Mesh Cover is a lightweight accessory designed to cover the microphone. With a weight of 2.88 ounces, this square grille mesh cover is durable and reliable for use in various musical instruments and gear. The brand CTI Audio / Omnitronics ensures quality and compatibility with the product. The sleek design and mesh cover provide a stylish and functional addition to any microphone setup, enhancing both the sound quality and aesthetic appeal. CTI Audio, Inc. is the previous name formerly related to Astatic/ Omnitronics and today known as CTI (Custom Technology Integration), and which provides audio-visual and event production services. Audio, Microphone Grille Manufactured by Millcreek Metal Finishing, Erie PA.. Rugged double mesh grill for high RF immunity but unaffected acoustics. Grille Material: Steel Mesh Windscreen Dimensions: 1.75" square. Professional Vintage - New Old Stock - Genuine CTI / Omnitronics Microphone Grille - Rare Proudly Made in USA Learn More

KEPWARE OPC A-B SUITE SOFTWARE Learn More

Proximity module, Thru beam emitter. Series A1. Learn More