Featured Products

Switch, toggle. Contacts: SPST-NO. Contact Ratings: 115VAC 10Amp. Actuator: ON(Mom)-Off-None. Connection: screw terminals #6-32. Mech: Panel, Bushing 15/32" - 32 thread. Body: 1.140" long x 0.635" wide x 1.014" deep including terminals. Note: Threaded bushing length: 0.508". Actuator length: 0.675". Double marked AN3021-11. Complete with hardware. Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 10Amp 115VAC. Actuator: On - Off (Mom). Connection: solder. Mech: Panel. Panel hole: 1.134" long x 0.637" wide x 0.684" high. Standard 15/32" threaded bushing x 0.517" long (seated). Actuator: 0.690" long. Note: Complete with hardware. MS35058-29. Former MS35058-10. Learn More

CUTLER-HAMMER - ST40F - Switch, Toggle.

Contacts: SPDT.

Contact Ratings: 10Amp 115VAC.

Actuator: On-On (Mom).

Connection: screw.

Mech: Panel. Panel hole: 1.134" long x 0.637" wide x 0.684" high.

Standard 15/32" threaded bushing x 0.529" long (seated).

Actuator: 0.695" long.

Note: Complete with hardware.

MS P/N: MS35058-26.

Former P/N: MS35058-6.

Proudly Made in USA

 

Learn More

CUTLER-HAMMER - ST12B - Switch, Toggle.

Contacts: SPST.

Actuator: On-Off (Momentary).

Connection: Solder, Terminals

Current Rating: 125 VAC 6A, 250VAC 3A

Mech: Panel.

Body Dimensions: 1.152" long x 0.675" wide x 0.564" behind panel.

Standard 15/32" threaded bushing x 0.520" (seated) long.

Note: Complete with hardware.

Learn More

EATON CUTLER-HAMMER - 8785K6 - Toggle. SPDT Aircraft Flange Mount

SPDT Aircraft Flange Mount

See Attached Mil Specifications

NSN 5930-00-989-4285, MS25072-23

New Old Stock - Made in USA

Learn More

Cutler-Hammer / Eaton - 7692K63 - Switch, Toggle.

Contacts: 4PDT.

Contact Ratings: 15Amp 125VAC / 10Amp 250VAC, 3/4HP 250VAC.

Actuator: On-Off-On, no bat.

Connection: 12 screw terminals.

Panel hole: 1.436" x 1.331" x 0.971" high plus threaded bushing 0.5".

Note: Center off.

New Old Stock - Made in USA

Learn More

Crouzet Corp - PB-24Q-1 - Relay Board.

Status: Discontinued

For I/O Relays, Quad Socket Board.

Learn More

Cutler-Hammer / Eaton - 8887K5 - AN3227-5 - Switch, Toggle.

Mil spec series of switches made by both Cutler-Hammer and also Arrow Hart. These switches were used in military spec equipment and aircraft from the 1940's, 1950's up to the 1960's.

Contacts: 4PDT.

Contact Ratings: 15A 125VAC/10A 250VAC.

Actuator: On-Off-Mom.

Connection: 12 Screw Terminals.

Mech: Panel, Aircraft Flange with 1.8" centers.

Flange: 1.008" wide x 2.214" high.

Body: 1.445" long x 1.338" wide x 1.338" behind panel.

Insulation Resistance: 100 MegOhms

Note: Rubber gasket/Environmentally sealed.

Double marked AN3227-5.

Alternate: 8884K5

Genuine Cutler Hammer - New Old Stock - Made in USA

Application: Aviation, Vintage World War 2 Military Grade

Learn More

Cutler-Hammer Eaton - 8811K18 -  Switch, Toggle.

Contacts: SPST. None/Off/On

Contact Ratings: 115VAC 10Amp. 28VDC

Contact Plating: Silver

Actuator: Off - ON(Mom).

Connection: screw terminals #6-32.

Mech: Panel, Bushing 15/32" thread.

Body: 1.140" long x 0.635" wide x 1.014" deep including terminals.

Note: Threaded bushing length: 0.480".

Actuator length: 0.675".

Double marked MS35058-28.

Complete with hardware.

Learn More

Cutler-Hammer Eaton - 7566K83/84 Switch, Toggle.

Contacts: SPST-NO.

Contact Ratings: 15Amp@125VAC, 10Amp@250VAC.

Actuator: Momentary.

Connection: Screw Terminals.

Mech: Panel. Body: 1.328" long x 0.750" wide x 1.014" deep including terminals.

Note: Threaded Bushing Length: 0.457".

Actuator Length: 0.324".

No knob.

Learn More

Cutler-Hammer / Eaton - SA32SETI Switch, Pushbutton.

Contacts: SPDT.

Contact Ratings: 3Amp 125VAC.

Actuator: NO - NC. Momentary.

Connection: Solder Terminals.

Mech: PCB.

Body: 0.416" long x 0.279" wide x 0.522" behind board plus connections.

Terminals: Solder.

Note: Miniature. No knob.

Threaded bushing 0.268" plus seat (overall 0.315").

Actuator length: 0.398" long.

Made in Japan

Learn More

EATON  CUTLER-HAMMER - 7570K4 Switch, toggle.

Contacts: DPDT.

Contact Ratings: 15Amp 125VAC/10Amp 250VAC/1/2HP 250VAC.

Actuator: Off - ON(Mom).

Connection: solder terminals.

Mech: panel. Body: 1.325" long x 0.750" wide x 0.994" behind panel.

Note: Threaded bushing length: 0.470".

Actuator length: 0.560".

Learn More

Cutler-Hammer Eaton - 1555A-6507 Series A2 Fiber-Optic Sensor

Eaton Cutler-Hammer 55 Series Photoelectric Sensors are identical to Eaton Cutler-Hammer's 50 Series except without the interchangeable outputs or logic functions. They offer durability and high optical performance in a cost effective, self-contained package. The 55 Series features sensors with AC and DC operation in a single unit. A relay option is available on these models that provides a 3 Amp SPDT relay output for high current switching.

Eaton Cutler Hammer, 1555A-6507, Eaton 55 Series Photoelectric Sensor, Photoelectric, Sensor distance depends on the fiberoptic cables used, 50 mA max DC, NPN and PNP Open Collector, 50 mA at 30 Vdc, 4 Pin Mini Connector, 10-30 Vdc input, Auto reset short circuit

Features:

• High optical performance includes 100-foot (30.5m) thru-beam range and 6-foot (1.8m) diffuse reflective range
• Both AC and DC operation in a single unit
• Short circuit protected solid-state outputs on AC/DC and DC-only versions (except thru-beam)
• Relay output option provides 3 Amp current switching on AC/DC models
• Thru-beam models feature an infrared sensing beam along with a visible red LED behind the lens in the source unit to aid in sensor alignment
• Fiber optic sensors operate in thru-beam or diffuse reflective mode depending on the fiber optic cable selected
• Glass fiber optic cables plug into NEMA 4 rated sockets on the front of the sensor. Sockets are leakproof even when the fiber optic cables are not plugged in
• Fully potted construction for use in areas subject to washdown, high shock and/or vibration
• Choice of pre-wired power cable or built-in mini-connector versions. Standard pre-wired cable length is 6 feet (1.8m)
• Built-in, patented, 360 degrees rotation 10 degrees tilt ball-swivel base

SELF-CONTAINED,BARE BONES, 30VDC,CONN,W/FIBEROPTIC ADA

10-30VDC / Con.

 

Learn More

Glass fiber steel covered straight threaded 1/16" bundle, 3 ft long. Learn More

Crouzet Corp - PB-24 - Relay, Circuit Board.

The PB24 I/O mounting rack can accommodate up to 24 single-channel Opto 22 standard
(Generation 1) I/O modules. The PB24 I/O mounting rack uses a 50-pin card edge connector for interface to computer parallel I/O ports via a 50-conductor ribbon cable.

I/O Board Module Rack

24 Position. (24-Channel).

LED Status Indicator for Each Channel

Dimensions: 476.3mm Length, 114.3mm Width, 55.9mm External Depth

50 Pin, 6-32 Screw Terminals  

Note: Double marked 57-105 Rev W and CPX-70.

New Old Stock.

Learn More

Custom Component Switches CCS - 642VH18 – Dual Snap Vacuum Switch, 15Amp 125 PSIG New. CCS Vacuum/Pressure Switches are high quality maintenance free instruments. They are designed by using the Dual-Snap Belleville Principle. Status: Discontinued Switch, Vacuum. Increase Vacuum: 25 IN HG Decrease Vacuum: 20 IN HG Electrical: 15 Amp 125/250/480 VAC 0.4Amp 125 VDC 0.2Amp 250 VDC New Old Stock – Rare - Difficult Component to Find Made in USA Learn More

CRAMER - 632E-A20S Meter, Hour.

4 Hour digits plus 1 tenths.

50 Cycle, 120VAC or 115VAC

Elapsed time. 9999.9 Hour.

Non-resettable.

Mount: 2.5" hole.

Body Diameter: 2.203"

Mounting Flange Width: 2.969" 

Body Depth: 2.850"

Mounting Method: Semiflush

Note: Cramer / Giannini Controls Corp.

NSN 6645-01-361-8947

Made in the USA.

New

Learn More

Crystal oscillator. 31.578MHz. Learn More

40.0MHZ CRY OSC NEW Learn More

CRYDOM - M5060TB1400 – Power Module, 60 Amp 1400VAC M50 Series High Surge Current Rectifier Circuit Diode. 60 Amp 1400VAC (530VAC). M50 diode series. Operating temperature: -40 to 125 Deg C. Package: Power Module Dimensions: 1.80” 1.750” X 1.140” UL E72445 New. Learn More

Relay, SSR. Input: 3-6VDC. Output: 3Amp 240VAC. I/O module. Note: Double marked OAC5A. Listed: UL/CSA. Learn More

Audio amplifier. 120VAC 50/60Hz 20Amp. Max input 2400 watt. Learn More

Connector, terminal block. Circuit count: 20 position. Connection: turret pins. Outside dimensions: Overall: 9-9/16" long x 0.74" wide. Note: Curtis Milwaukee. Learn More

Connector, terminal block. Circuit count: 5 Position. Mounting type: PCB feed-thru. Connection: #6 screw. Outside dimensions: 2.25" long x 0.73" wide x 0.544" high. Learn More