Featured Products

Hardware, Clamp / Strap For 1/2" Conduit/EMT.

One Hole Conduit Strap, Steel, Nominal Conduit/Pipe 1/2 in, For Use With EMT,

Package of 10

Learn More

Hardware. Gears and belts set, 2 plastic 14.4mm 17-tooth and 2 smaller 9.6mm 11-tooth gears. All approximately 4.7mm ID plus 3 different corresponding belts approximately 80mm, 70mm and 50mm. Outside diameter KIT - for precision timing and light-duty robotics. COG BELTS. Learn More

IC. One of eight decoder with three state outputs and polarity control. Package: 20 Cdip. Socket pulls. Clean. Used/Removed from equipment. Learn More

IC, military. Memory 1024 Bit, 1024 Word, 13 input. Military NSN 5962-01-083-1707. Case: 16 Cdip, socket pulls, trimmed leads. Learn More

IC, TTL. Octal transparent latch invert. Package: 20 dip. Used/Removed from equipment. Learn More

Advanced Micro Devices - AM9114E/BVA -IC, Memory.

Status: Discontinued

SRAM 1K x 4 200ns.

Package: 18 Cdip.

Note: FSCM 34335 Military.

Learn More

IC. Voltage comparator. Fast, manufactured with an advanced bipolar NPN, schottky-diode high frequency process. This circuit has differential analog inputs and complementary logic outputs. Package: 8 Dip, plastic. Learn More

OFC - MC794A5-047 Precision Crystal Oscillator

OFC - Oak Frequency Control Group

22.400MHz Full Size Crystal Can

Hermetically Sealed 

Additional Information: http://www.n4iqt.com/OFC-MC834X4-018W/DB_appnotes.pdf 

 

 

Learn More

Connector, IDC & D-Sub. Circuit count: D-Sub 50 Position. Mounting type: panel. Note: IDC 3448-8D50 with strain relief 125V 1A 105 Deg C. Military NSN 5935-013363250. Learn More

Connector, header. Housing gender: plug. Contact gender: male. Circuit count: 80 Position (20 x 4 = 4 Rows). Contact ampacity: 1Amp. Mounting type: PCB, RA. Pin spacing: 0.100" x 0.100". Note: Without ejector latch. Accepts board 0.062" (1.57mm). Learn More

3M - 3372-6602 - Connector, Header.

Status: Discontinued

Circuit count: 60 Position.

Mounting type: PCB, straight.

Pin spacing: 0.100 x 0.100".

Connection: solder tail.

Note: Ejector latch. Accepts 0.062" (1.57mm) board.

Alternate: 33726602UG, TE Connectivity 1-5499206-1

Learn More

Hardware, lug kit. 2-14AWG. 3P 60Amp. 3 pieces per bag. Learn More

Connector, rectangular. Male 50 Position with flange, 0.100" (2.54mm). 2 Row. Series 4600. Wire size: 26-28AWG. Learn More

Connector, rectangular. Male 16 Position with flange, 0.100" (2.54mm). 2 Row. Series 4600. Wire size: 26-28AWG. cable termination: IDC. Mount: panel. Note: Mates to 26 Position IDC socket, not included. Learn More

Connector, header. Housing gender: plug. Contact gender: male. Circuit count: 40 Position. Contact ampacity: 1Amp. Mounting type: PCB, Wire to board, straight. Pin spacing: 0.100" x 0.100". Note: With strain relief. Learn More

Connector, header. 10PS R/A Short Latch PCB Mnt RECEPT, 10 Contacts, PIN, 0.1 Pitch, PC TAIL Terminal, Latch & Eject. Learn More

3M - 3432-5002 - Connector, Header. 40 Pin Male. Right Angle, Pitch 0.100” (2.54mm), Ejector Latch Series: 3000 Connector Type: Header Contact Type: Male Pin Pitch – Mating: 0.100" (2.54mm) Number of Positions: 40, Number of Rows: 2 Row Spacing – Mating: 0.100" (2.54mm) Type: Board to Board Shrouding: Shrouded - 4 Wall Mounting Type: Through Hole, Right Angle Termination: Solder Contact Length – Mating: 0.240" (6.10mm), Contact Length – Post: 0.112" (2.84mm) Insulation Height: 0.340" (8.64mm) Contact Shape: Square Contact Finish – Mating: Gold Contact Finish Thickness – Mating: 30.0µin (0.76µm) Contact Finish – Post: Tin, Contact Material: Copper Alloy Insulation Material: Polycyclohexylenedimethylene Terephthalate (PCT), Polyester, Glass Filled Features: Keying Slot, Mounting Flange Operating Temperature: -55°C ~ 105°C Material Flammability Rating: UL94 V-0 Current Rating (Amps): 1.75A Contact Finish Thickness – Post: 200.0µin (5.08µm) Learn More

Bargraph display tube. Red 100mm. Overall glass tube is 9.2mm/0.36" D x 150mm/15cm/0.15m/6.1" long. Learn More

ABB - S272K20A - Circuit Breaker.

Double Pole

277/480VAC 20 Amp.

Mount: Din Rail.

Dimensions: 4" X 4" X 2"

Factory New

Learn More

Auxiliary contact block. 4PST 16Amp NC. For ABB contactors. 1SBN010040R1040. Learn More

ABB - A110-30 - Contactor.

3P NO 120VAC 55KW, 110A with CAL18-11 auxiliary contact block.

Maximum Contact Current:140A Coil Voltage

120VAC @60Hz, 110 VAC@50Hz.

Dimensions: 148mm long x 102mm wide x 123mm deep.

Excellent Condition.

Learn More

3M - 4737T 1/4 - Hardware, Electrical Tape.

Scotch® High Temperature Fine Line Tape 4737T should be used for masking fascia, rocker panels, two-tone and other multiple color applications where critical paint break lines are required in high value processes. For indoor use only.

Scotch High Temperature Conformable.

Material: Vinyl Fineline.

Number 3m Part Number: 4737T

Adhesion To Steel Ozin N100 Mm: 10.5 (11.5)

Adhesive Type: Rubber

Backing Material; Vinyl

Color Translucent Blue

Dimensions: Width:  ¼” (0.250), Length: 36 Yards

Elongation: 115 Percent

Industries: Automotive; Electronics; Furniture; General Industrial; Metalworking; Military & Government; Specialty Vehicle; Transportation; Woodworking

Maximum Operating Temperature: 149 C (300 F)

Tensile Strength Metric: 280

Thickness: 5.4

Size: 1/4" x 36 yards x 5.1 mil (0.13 mm).

New Old Stock

SKU: 00021200722462

Proudly Made in USA

Learn More

Cartridge heaters for plastic injection molding machines. Brass, 595watts, 220V. Case: 0.785" D x 15.00" long. Learn More

3M - 3625/44 - Cable, Ribbon, Round Conductor.

28 AWG stranded conductors on 1 mm wire spacing is designed for mass termination to metric connectors

Stranded wire provides flexibility and extended product life

28-44C. (28 AWG 44 Conductor).

Conductor type: Stranded 7/36.

Operating temp: -20 Deg C to +105 Deg C.

Material: Polyvinyl Chloride (PVC)

Voltage Rating: USA: 300V Canada: 300V EU: <50V

Insulation Resistance: (Primary Cable) > 1 × 1010 Ω/10 ft. [ 3 m ]

Characteristic Impedance: Unbalanced Balanced 89 Ω 146 Ω

Capacitance: 54.5 pF/m [ 16.6 pF/ft ] 32.2 pF/m [ 9.8 pF/ft ]

Inductance: 0.43 μH/m [ 0.14 μH/ft ] 0.68 μH/m [ 0.21 μH/ft ]

Propagation Delay: 4.86 ns/m [ 1.48 ns/ft ] 4.69 ns/m [ 1.43 ns/ft ]

Velocity of Propagation: 69% 71%

Insulation: 9 mil wall insul.

Note: Gray 1mm, with a red trace wire 300V, 105 Deg C, pitch 0.0394". Style 2651.

Priced by Foot, Minimum Order Length: 10'.

Learn More