Featured Products

C & K Components - 3U0210L02 - Switch, BCD.

Pushbutton 0-9,

1 Amp,

Two Tiny Pushbuttons: Up or Down

Snap-in front mount.

Gold-plated contacts & PC board.

More info: http://www.ck-components.com/3/thumbwheel,10595,en.html

Learn More

IC, D/A Converter. Monolithic 16-Bit, +/-1mA +/-10V Out, pin compatible with DAC70,71,72 series. Used/socket pulls. Case: 24-Cdip gold leads. Learn More

Switch, toggle. Contacts: DPDT. Contact Ratings: 5Amp 120VAC, 2Amp 250VAC. Actuator: On-On-On. Connection: PC terminals. Mech: PCB or panel, RA leads. Note: Miniature. Learn More

Switch, rocker. Contacts: 4PDT. Contact Ratings: 5Amp 120VAC, 2Amp 250VAC. Actuator: On-None-On. Connection: solder terminals. Mech: PCB or Panel, with mount flange. Note: Miniature. Complete with hardware. Learn More

Switch, slide. Contacts: SPDT. Contact Ratings: 6Amp 120VAC/3Amp 250VAC. Actuator: On-None-On. Connection: PC leads. Body: 12.9mm long x 6.8mm wide x 7.8mm high, with mount flange at 17.5mm centers. Note: Sealed contacts. Made in the USA. Learn More

C & K Components - SP-ITI - 7000 Series Switch, Toggle.

Contacts: SPDT.

Contact Ratings: 0.4VA, 20V Max.

Actuator: ON-On.

Connection: Right Angle PCB leads.

Mech: Through hole - PCB.

Note: Non-threaded bushing.

Short bat.

Sealed Miniature switch.

Listed: UL/CSA.

Color: Red.

Learn More

C & K Components - 7211J2ZLE22 - Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 0.4VA 20V max.

Actuator: Paddle, On-On-On.

Connection: Solder.

Mech: PCB.

Body: Snap in mount frame 24.1mm long x 15.5mm wide.

Miniature.

New Old Stock

Made in the USA.

Learn More

C & K Components - 7201J2ZQE2 Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 5Amp 125V.

Actuator: On-On.

Elect config: Gold/Solder Terminals.

Mech: PCB.

Additional Information: https://www.ckswitches.com/products/switches/product-details/Rocker/7000/

Note: Mini flat paddle. Panel Mount Flange Attachment is not included.

Learn More

C & K Components - 8161-J86-C-G-226 Switch, Illuminated Pushbutton.

Contacts: SPDT.

Contact Ratings: 0.4VA.

Actuator, P/B latching.

Illumination: Green LED on side.

Connection: PCB terminals, Gold Plated.

Mech: Snap-in. Panel hole: 0.5 x 0.75" hole.

Weight: 0.2 oz.

Note: Push On / Push Off 

Snap Action with Frame & LED.

(Note: Outer bezel dimensions: 0.779" (19.7mm) long x 0.620" (15.7mm) wide x 7.1mm high including actuator).

New Old Stock

Learn More

C & K Components - 3-374 - Switch, Rotary.

Contacts: 2P 3 Position.

Contact Ratings: 12Amp 125VAC, 6A 250VAC, 1A 125VDC.

Note: Bushing: 3/8: threaded.

H Series.

Note: The nature of the switch is inherently non-shorting and operates according to the table below. It cannot emulate the identical operation of a 2-wiper, 3-position switch. This design was necessary to achieve the current ratings of the switch. Pair

LeftCenterRight 1-2 Open Open Closed 1-8OpenClosed Open 7-8ClosedOpenOpen 3-4ClosedOpenOpen 4-5OpenClosedOpen 5-6OpenOpenClosed

Similar to R20307RN02Q

Learn More

C & K Components - 7207KC Switch, toggle.

Contacts: DPDT. Series 7000

Contact Ratings: 120VAC 5Amp (0.4VA).

Actuator: 3 Position, Pull to switch. On-Off-Momentary.

Each side On can be locked into place.

Mech: PCB, 6 pin.

Note: Miniature.

Threaded Bushing length 0.377".

Actuator length: 0.581".

Additional Information: https://www.ckswitches.com/media/1394/7000toggle.pdf

Learn More

Burndy - DILB40P-11T Connector, IC sockets.

40 Dip, low profile.

Package of 10, one manufactures new tube.

Learn More

Burndy - DILB28P-11T - Connector, IC Low Profile Socket. 28 DIP. Package of 15. Exclusive GTH contacts for low cost, high reliability, and good as gold performance. Exceeds the performance requirements of MIL-S-83734. Self-aligning contacts with tapered tails for faster assembly to P.C.board. Automatic machine insertable with state of the art insertion equipment. Supplied in antistatic plastic tubes. Accepts gold, tin or silver plated I.C.'s. High temperature UL94V-0 rated thermoplastic body. Packaging: Tube Part Status: Active Type: DIP SOCKET Positions: 28 CONTACTS 28 PIN DIP SOCKET Terminal Pitch: 0.100” (2.54mm) Row Spacing: 0.600” (15.24mm) Number of Positions or Pins (Grid): 28 (2 x 14) Contact Finish – Mating: Tin Contact Finish Thickness – Mating: 100.0µin (2.54µm) Contact Material – Mating: Phosphor Bronze Mounting Type: Through Hole Features: Open Frame Termination: Solder Contact Finish – Post: Tin Contact Material – Post: Brass, Copper Housing Material: Thermoplastic Polyester, Glass Reinforced. Operating Temperature: -40°C ~ 105°C Material Flammability Rating: UL94 V-0 Current Rating (Amps): 1 A Contact Resistance: 30mOhm Package of 15, one new full manufacture tube. New Old Stock Learn More

Burndy - DILB24P-11T Connector, IC Socket.

24 Dip, Low Profile, Wide.

0.100" Termainal Pitch

0.600" Row Spacing

PC Tail Terminals

Package of 10. 

Alternates: T01-24, C9324-02, 2-641604-3

Learn More

C & K Components - 7201SYCGE - Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 5Amp 120VAC, 2Amp 250VAC.

Actuator: On-On.

Connection: PC leads.

Mech: PCB.

Panel hole: 0.502" long x 0.453" wide x 0.377" high.

Threaded bushing 0.350" long.

Actuator 0.412" long.

Note: Miniature. Hardware required, not included.

Made in the USA.

Learn More

True RMS-TO-DC converter 14-dip module new gold leads Learn More

Cooper Bussmann No 616 Fuse Holders. Buss Reducers, Adapters, 100 - 60Amp, Class H & K.

Fuse reducers install in fuse clips to permit the installation of smaller size fuses than those for which the clips are designed. UPC 051712331111

• Fits into most panels/switches, including the dead-front type
• Strong contact is maintained both mechanically and electrically
• 100 Amp to 60 Amp, 600 Volts AC
• Fuse Reducer
• UL Class H & K
• Fits into most panels/switches, including the dead-front type
• Strong contact is maintained both mechanically and electrically
• UL Listed (GUIDE # IZZR, FILE #E12853)
• CSA Certified (CLASS 6225-01, FILE #47235)

One pair (2) per box.

UL/CSA Listed.

UPC 051712331111

Alternates: Newark 02B5127, Mouser 504-NO.616, Digi-Key NO.616.ND 

Genuine Cooper Busmann - New Old Stock

 

Learn More

28VDC 3-Pole Normally Open contacts Hermetically Sealed - Large can approx 2.35" dia x 4.6" Tall - 3 mounting screws - Eight wire solder hooks - Bet they can't afford to make 'em like this anymore - Schematic on can - New, old stock 19oz Learn More

Rotary Optical Encoder. Incremental. Insta-Mount. Learn More

Coaxial attenuator, 20dB 15 watt. "N" male to "N" female connectors. Dimensions: 0.995 (25.2mm) D x 4.311" (109.5mm) long. Learn More

BIRD - 2080-025 - Meter, Panel.

Bird® offers a wide selection of portable insertion-type instruments for measuring forward and reflected power in coaxial transmission lines.

High Quality Bird Meter.

Wattmeter 0-1000 Watts, +/-1dB

Full Scale = 100 uADC.

Phaostron Sealed.

Dimensions: 1.5" D Round with Mount Face 1-3/4" Square.

Phaostron Sealed

Boxes are Marker: 618-20193.

New Old Stock

Proudly Made in USA

 

Learn More

ABB / Bailey Controls Co. - 6635291A2-15 - FLAMON Sensor Cable, 15', New The ABB / Bailey Controls Co. FLAMON Sensor Cable, model 6635291A2-15, is a new electrical equipment and supply product made in the United States. This sensor cable is designed to provide accurate and reliable flammability monitoring capabilities for industrial and commercial applications. With ABB's reputation for quality and durability, this product is sure to meet the needs of businesses in various industries looking to ensure safety and compliance in their operations. Bailey Controls now ABB Coax Cable with One BNC & One 2 Pin Amphenol Female MS3108B-10SL-4S Connector. Lewngth : 15 Feet New Very High Quality Industrial Braided Shielded Cable with Clear Protective Jacket. Made in USA Learn More

BIMBA Flat 1 - FS-090.125-1 - Pneumatic Cylinder 

Bimba Double Acting, single End Rod

Bore: 1-1/16"

Stroke: 0.125"

Mount Type: Basic

Bumper Type: None

Rod Thread: Standard Female

Temperature Option: Standard

Hollow Rod: NO

Rod Wiper: NO

Excellent Slightly Used Condition

Learn More

BIRD - 5-702-2 - Connector, SMA. Female RF Connector, Spin-in/Solder Type. SMA (SubMiniature version A) connectors are semi-precision coaxial RF connectors developed in the 1960s as a minimal connector interface for coaxial cable with a screw-type coupling mechanism. Specifically designed for RF applications needing secure, durable connections. These connectors feature gold-plated bodies with gold-plated center contacts to ensure low signal loss and high conductivity. SMA RP – Female (Male Pin), Spin-In An SMA Female "Spin-in" type connector (often referred to as a "spin-in" or "drop-in" adapter/connector in specialized, sometimes older or proprietary RF documentation) is a specific configuration of a SubMiniature version A (SMA) connector where the connector body or a portion of it is designed to be threaded or screwed directly into a prepared housing, panel, or device chassis rather than being soldered or crimped to the outside. They are commonly used in RF, microwave, and test equipment for a secure, mechanically robust connection. Material: Gold Plated Machined Brass Construction, PTFE Fluorocarbon Dielectric. Contact: Gold Plated Beryllium Copper (BeCu) Connection A: SMA Female, Connection B: Solder Cup Coupling Mechanism: Threaded (1/4″ - 36 UNS) for secure, low-attenuation connections. Impedance: 50 Ohms Mounting Method: 0.2485" OD Panel / Bulkhead by Spin-In, Swedging, Soldering or Crimping. Rare - Genuine Bird – No Counterfeits – No China – No Delays – No Disappointments Applications: The SMA connector is most commonly used in microwave systems, hand-held radio and mobile telephone antennas and, more recently, with WiFi antenna systems and USB software defined radio dongles. It is also commonly used in radio astronomy, particularly at higher frequencies (5 GHz+ up to 18GHz). Industries: Aerospace, defense (radar), and medical devices. These were Overstock High End Medical Instrumentation Connectors. Proudly Made in USA Learn More