On Sale

Resistor, network. Resistance: 390 Ohm. Power: 2.25 watt, 100V. Tolerance: 2%. Temp coef: 100ppm/Deg C. Technology: thick film molded. Number of resistors: 8 isolated (1 circuit). Package: 16 Dip. Learn More

Resistor, network. 22K Ohm 2% 2.25W 100V. Temp coef: +/-100ppm. Technology: thick film. Number of resistors: 16. Package: 16 dip. RoHS compliant. Package of 4. Learn More

Resistor, network. Resistance: 10K Ohm. Power: 2.25 watt, 100V. Tolerance: 2%. Temp coef: 100ppm/Deg C. Technology: thick film molded. Number of resistors: 8 isolated (1 circuit). Package: 16 Dip. Learn More

TELEDYNE - U1899 - N-Channel JFET Switch

MOSFET 40V 8mA

New Old Stock

TO-18 Gold Leads.

Learn More

OMRON - LC1-C-E-JT-UA-AC24 - Relay, Power.

Input: AC.

Contacts: SPDT.

Contact Ratings: 5Amp.

Coil Voltage: 24VAC.

Mech Mtg: PCB 5 Pin.

Genuine Omron, New Old Stock

Learn More

MAXIM - MAX809SEUR-T - IC.

MPU Supervisor.

Threshold voltage: 2.93V.

Monitors: 1.

Supply voltage: 1.2 to 5.5V.

Reset type: active low.

Supply current: 17uA.

Delay time: 240ms.

Package: SOT-23-2 SMD.

Rohs compliant.

Pckage of 10

Learn More

Connector, D-Sub. DB25 Male to 10 Position Female IDC.

On a 9 Conductor Flat Ribbon Cable.

Overall Length: 10".

Note: Used / As removed from Equipment

Learn More

Ungar - PL824 - Soldering tools. Soldering Tip.

Soldering tools. Soldering tip.

Iron clad 3/16" thread in. New.

UNGAR - PL824 - Soldering Tools.

For general - purpose work.

Use with 4045 element thread into end.

Silver -plated ironclad copper.

3/16" O.D. for High Heat Transfer.

1" Unthreaded length

 

 

Learn More

UNGAR - PL332 - Soldering Tools.

1/8" Thread-In Offset Pencil Plated Tip.

PL Series: Iron Clad

Point: Cone

Tip Reach: .62" (15.74 mm)

1/8" Threaded-in Tips for use with standard line " UTC100" and Princess Heaters.

Applications: Use with heater # 535S, 1235S, 4035S.

With #100 adapter, can use with heaters 537S, 1237S, 4037S, 37 & UTC131 iron.

With #9054 adapter, can use with 9100, 9300, 9911AS, & UTC231 iron.

Tip Condition: New Old Stock

Alternate: Weller / Ungar PL 332

Package of 2.

Learn More

Ungar - PL834 - Soldering Tools. Offset Chisel Tip.

3/16" Threaded

This Soldering Tip is a designed for use with 3/16" Thread-In Heaters.

PL834 series tip for 3/16" Threaded Heaters

Precision Ground, Iron·Clad Silver Plated Copper Alloy Tip

Angled Chisel Tip

This tip is New Old Stock (N.O.S.) from a bulk case, with no retail packaging.

Package of 2.

Learn More

UNGAR - PL340 - Soldering Tools, Tapered Needle Tip. Iron clad.

1/8" Thread-In Plated Tip.

PL Series: Iron Clad

Point: 0.06"

1/8" Threaded-in Tips for use with standard line " UTC100" and Princess Heaters.

Applications: Use with heater # 535S, 1235S, 4035S.

With #100 adapter, can use with heaters 537S, 1237S, 4037S, 37 & UTC131 iron.

With #9054 adapter, can use with 9100, 9300, 9911AS, & UTC231 iron.

Tip Condition: New Old Stock

Alternate: Weller / Ungar PL 340

Package of 2.

 

Learn More

Ungar - PL138 - Soldering Tools. Tapered Needle Tip. Iron clad.

PL Series Tapered Needle Conical Solder Tip

1.27 x 16.7mm

Thread-On for Standard & DI Line Heaters

1.27mm x 16.7mm Tip Diameter

Solid copper, plated with iron all over

Nickel and chromium behind the working surface

Use with heaters 360, 362, 363, 537S, 1237S, 4037S, 37UG

Designed to provide maximum heat transfer from the heater to the tip

Applications: use with SL series, 3125, 3140, UTC100, DI and standard line heaters

Learn More

UNGAR - PL331 - Soldering Tools.

1/8" Thread-In Pencil Plated Tip.

PL Series: Iron Clad

Point: Cone

1/8" Threaded-in Tips for use with standard line " UTC100" and Princess Heaters.

Applications: Use with heater # 535S, 1235S, 4035S.

With #100 adapter, can use with heaters 537S, 1237S, 4037S, 37 & UTC131 iron.

With #9054 adapter, can use with 9100, 9300, 9911AS, & UTC231 iron.

Tip Condition: New Old Stock

Alternate: Weller / Ungar PL 331

Package of 2.

Learn More

Sprague - 500D/250/25V -

Series: 500D

Capacitor, Electrolytic. 250uF 25V.

Material: Aluminum.

Package: Axial Leaded.

Operating Temperature: 85 Deg C.

Dimensions: 0.433" D x 1.26" long.

Learn More

Teikoku Tsushin Kogyo - SINGAPORE NOBLE - V12M4-1S - 12M4-1(PH)S(SJ)13FB20K - Potentiometer.

Resistance: 20K Ohm.

With SPST Switch rated at 12VDC, 0.5A

Rated Power: 150V

Rotational Angle: 230 degrees +/-10

Mount: Panel or PCB, 3 leads.

Dimensions: 0.514" D x 0.302" high (Overall with shaft 0.864" high). 

Threaded Bushing Length: 0.234" long.

Shaft: Half 1/8" D x 0.301" Long.

SINGAPORE NOBLE - V12M4-1(PH)S(SJ)13FB20K

Alternate: RV-120

Applications: Audio/Visual, Industrial Controls, Medical Equipment.

 

Learn More

National Semiconductor - 2N4036 - Transistor, PNP.

Voltage: -65VCEO, -90VCBO.

Current: -1 Amp.

Dissipation: 5 watt.

perating temperature: -65 to 200 Deg C.

Package: TO-39,

Note: New but Cut 3/16" leads.

Note: Silicon.

Learn More

Motorola - JAN2N5109 - Transistor, NPN.

Max voltage: 20VCEO 40VCBO.

Max current: 400mA.

Dissipation: 2.5 watt @ 75 Deg C, 1 watt @ 25 Deg C.

Package: TO-39.

New. P/N: JAN2N5109.

Note: Silicon. RF & Microwave.

VHF/UHF. 1.2GHz

Current-Gain Bandwidth Product @ 50mA.

Maximum Unilateral Gain = 12dB (typ) @ 200 MHz.

Military NSN 5961-00-252-1331.

Learn More

MICRO PLASTICS - MPS0100-22DS4X9 - Connector, PCB Edge.

Housing Gender: Receptacle.

Contact Gender: Female.

Circuit Count: 22 Position, 44 Pin (double row).

Mount: PCB, w/o Mounting Ears.

Dimensions: 2.521" Long x 0.327" Wide x 0.430" above board.

Learn More

AMP INC - 67556-4 - Connector, PCB Edge. 22 Position / 44 Pin.

Connector, PCB Edge.

Housing Gender: Receptacle.

Contact Gender: Female.

Contact Plating: Gold Plated.

Circuit Count: 22 Position / 44 Pin.

Housing Material: Thermalplastic, Black.

Mounting Type: PCB.

Pin Spacing: 3.5mm.

Connection: PC Leads.

Insert configuration: 95.6mm long x 8.8mm wide x 18.3mm high.

Overall 108.8mm long including mount ears.

Learn More

Ungar - PL136 - Soldering tools. Tip.

Iron clad.

New.

Learn More

Ungar - PL116 - Soldering tools. 1/4" Chisle Tip, Iron clad. 

New Ungar PL116 1/4" Chisel Soldering Tip for Thread on Irons.

This Soldering Tip is a designed for use with SP80 Soldering Iron.

New Ungar PL116 1/4" Chisel Soldering Tip for Thread on Irons.

This Soldering Tip is a designed for use with SP80 Soldering Iron.

Applications: Models: 360, 361, 362, 537S, 1237S, 4037S, 37, 3125, 3140, 3180, DI, SL Series and UTC 100. 

 

Learn More

BOURNS - 3852Z-B44-502A - Potentiometer, Linear.

Resistance: 5K Ohm.

Power: 2 watt.

Tolerance: 10%.

Single turn.

Type: Cermet.

Mount: Panel.

Dimensions: 3/4" D round x 6.4mm high.

Threaded bushing: 3/8" D x 9.0mm long.

Shaft: Slotted 1/4" D x 2.5mm long.

Contacts: Solder.

More info: http://www.bourns.com/data/global/pdfs/385126.pdf#search=%223856a%22

Learn More

Vishay/Sprague - 715P10394J - Capacitor.

Capacitance: 0.01 PPF. 400V.

Tolerance: 10%.

Type: Orange Drop.

Material: Polypropylene film.

Package: Radial leads.

Dimensions: 18.2mm wide x 9.7mm tall x 9.0mm deep.

Lead spacing: 9.5mm.

Note: Case J.

Applications: Restoration of vintage equipment.

 

Learn More

Vishay/BC Components - FC246816335 - MKT468 - Capacitor, MPF.

Orange Drop are designed and manufactured for operation in a wide range of demanding environments and applications. They are wound from the most reliable polyester film and aluminum foil available and are protected by a rugged conformal coating of orange epoxy. They may be operated up to +125 °C with proper derating.

Rating: 3.3uf 250VDC.

Tolerance: 10%.

Package: Radial.

Dimensions: 24mm wide x 9.0mm deep x 16.5mm.

Operating temp: 85 DegC.

Lead Spacing: 20mm.

Orange, Epoxy Coated.

Alternates: Newark 35M0634, Mouser 594-2222-468-16335

 

Learn More