On Sale

Motorola MJE1100 Transistor, NPN. Power BiPolar

Status: Discontinued

Voltage: 60V.

Current: 5 Amp.

Dissipation: 70 watt.

Dc Gain (Minimum) : 750.0

Operating Temperature: -55 to 150 Deg C.

Case: 90-05 3Pin Gold Plated Leads and Pad

Package: TO-127.

Note: Silicon Darlington.

New Old Stock

ST MICROELECTRONICS - MJE181 Transistor, NPN.

Status: Discontinued

Voltage: 80V.

Current: 3 Amp.

Dissipation: 2.5 watt.

Package: TO-225AA.

Note Silicon.

STERLING MANU. CO. - 22-10-2121 - Connector, Header.

Contact Gender: Male, unshrouded.

Circuit Count: 12 Position (each side).

Mounting Type: PCB, vertical.

Pin Spacing: 0.100".

Contact Plating: Gold.

ST Microelectronics - MJE2955T - Transistor, PNP.

Voltage: 60VCEO, 70VCBO.

Current: 10Amp.

Dissipation: 75 watt.

Operating Temperature: -55 to 150 Deg C.

Package: TO-220.

Note: Silicon bipolar.

Panasonic - MJE13005 - Transistor, NPN.

Voltage: 400VCEO, 700VCEV.

Current: 4Amp.

Dissipation: 75 watt.

Package: TO-220.

Note: Silicon.

Operating temperature: - 65 to 150 Deg C.

Switchmode.

Alternate: NTE51

PANASONIC/MATSUSHITA - ECEV1VA470P - Capacitor, Electrolytic.

Ratings: 47uF 35V.

Tolerance: 20%.

Material: Aluminum.

Package: SMD.

Height: 5.0mm.

Package of 10.

NICHICON - 518D105M050HX7S - UWX1H010MCr1GB - Capacitor, Electrolytic.

1uF 50V.

Tolerance: 20%.

Material: Aluminum.

Package: SMD.

Dimensions: 4 x 4.5mm.

Note: Type: UWX1H010MCr1GB.

From: Manufacture new T/R.

Alternate: UUT1H010MCL1GS

Package of 10.

Motorola - MJE802 HOUSE#  6547 - Transistor, NPN.

Voltage: 80V.

Current: 4Amp.

Dissipation: 40 watt.

Operating temperature: -55 to 150 Deg C.

Package: TO-225. Gold Plated Leads and Pad

Note: Silicon Darlington.

House numbered 533 6574.

Motorola - MJE13005 - Transistor, NPN.

Voltage: 400VCEO, 700VCEV.

Current: 4Amp.

Dissipation: 75 watt.

Package: TO-220.

Note: Silicon.

Operating temperature: - 65 to 150 Deg C.

Switchmode.

Alternate: NTE51

Motorola - SJE5115 - Transistor, PNP.

Voltage: 300V.

Current: 500mADC.

Dissipation: 20 watt.

Operating temperature: - 65 to 150 Deg C.

Package: TO-225.

Note: Silicon.

Alternate: MJE350.

Transistor, PNP. Voltage: 300V. Current: 500mAdc. Dissipation: 20 watt. Operating temperature: - 65 to 150 Deg C. Package: TO-225. Note: Silicon.

Motorola - MJE200 - Transistor, NPN.

Voltage: 25VCEO, 40VCB.

Current: 5Amp.

Dissipation: 15 watt.

Operating temperature: - 65 to 150 Deg C.

Package: TO-225AA.

Note: Silicon.

Motorola - MJE15031 - Transistor, PNP Silicon.

Max voltage: 150V.

Max current: 8 Amp.

Dissipation: 50 watt.

Gain: DC Current gain specified to 4 Amperes.

Package: TO-220.

Note: High Current Gain - Bandwidth product. 

Motorola - MJE2955T - Transistor, PNP.

Voltage: 60VCEO, 70VCBO.

Current: 10Amp.

Dissipation: 75 watt.

Operating Temperature: -55 to 150 Deg C.

Package: TO-220.

Note: Silicon bipolar.

Mersen GOULD/SHAWMUT - 69132 - Connector, Power Distributiuon Block, terminal Block. PDB 2Pole.

Versatile Power Distribution Blocks for cable terminations Mersen Power Distribution Blocks afford a safe, convenient way of splicing cables, splitting primary power into a variety of secondary circuits or providing a fixed junction tap-off point. Power block options include single or dual primary connections
with up to 30 secondary connections.

Connector, terminal block. PDB 2P. (2) 350MCM-#6 x (6)2/0-#14. Note: 2-P, 620A, BX/BX LINE: (2)350MCM-6AWG BOX LUG LOAD: (6)2/0-14AWG BOX LUG.

No. of Poles: 2

Amps (AC): 620 Amps

No. of Inputs per Pole: 2

No. of Outputs per Pole: 6

Line/Load Connection: Box Lug/Box Lug

Mounting Type: Panel Mount

Input Wire Range: 350 kcmil~6 AWG

Output Wire Range: 2/0~14 AWG

Includes Cover: No

Voltage (AC):600 Volts AC

Composition: Glass-Fill Polycarbonate

Color: Black

Approvals: UR; CSA

H x W x D:5.35 in x 7.81 in x 3.91 in

UPC:  782001655815

Alternate: MPDB69132

Note: Mersen, formerly Ferraz Shawmut

Mersen GOULD/SHAWMUT - 69082 - Connector, Power Distribution Block, Terminal Block 380A.

The Next Generation Power Distribution Block (PDB). Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. All blocks are UL and CSA approved while meeting spacing requirements for feeder and branch circuits in conjunction with UL508A and the National Electrical Code®.

This efficient aluminum block splices cables or splits primary power into a wide range of secondary circuits and provides a fixed tap-off point. It accepts aluminum or copper wire, and saves splicing and taping time for contractor rework.

PDB 2P. (1) 500MCM-#4 X (12) #4-#14. 600V CU9AL.

No. of Poles: 2

Amps (AC): 380 Amps

No. of Inputs per Pole: 1

No. of Outputs per Pole: 12

Line/Load Connection: Box Lug/Box Lug

Mounting Type: Panel Mount

Input Wire Range: 500 kcmil~4 AWG

Output Wire Range: 4~14 AWG

Includes Cover: No

Voltage (AC):600 Volts AC

Composition: Glass-Fill Polycarbonate

Color: Black

Approvals: UR; CSA

Dimensions: H x W x D:5.35 in x 5.31 in x 3.91 in

UPC 782001655655

Mersen, formerly Ferraz Shawmut

Applications: Splicing cables, Splitting primary power into secondary circuits, Fixed junction tap-off points

Mersen GOULD/SHAWMUT - 69002 - Connector, Power Distribution Block, 545Amps, PDB 2Pole.

PDB 2P 1000-250MCM

MPDB69 Series 

600V CU9AL.

Note: Splicer Block

2-Pole, 545Amp

Bx/Bx Line:(1)1000MCM-250MCM Box Lug

CuAl Load:(1)1000MCM-250MCM Box Lug

CuAl. UL, CSA

Mersen, formerly Ferraz Shawmut

Applications: Splicing cables, Splitting primary power into secondary circuits, Fixed junction tap-off points.

Mersen GOULD/SHAWMUT - A70P150-4 - Fuse.

A70P Amp-Trap® Form 101 Semiconductor Protection fuses were developed for higher voltage AC and DC drives, UPS systems, reduced voltage motor starters and similar applications where lower l2t and superior reliability are needed. A70P is a very popular fuse, available in a wide range of ratings. Typically used for replacement.

150Amp 700VAC.

Fast Acting Semiconductor Fuse.

Type 4 Form 101.

AmpTrap.

Operating temperature: 150Deg C.

Blade type.

Dimensions: body 1.502" D x 2.855" long.

Overall with blades 5.116" long.

Blades are 1.124" long x 1.011" wide x 0.251" deep. 

Applications: Protection of 700V or less DC drives, UPS, inverters, reduced voltage starters, etc.

Mersen GOULD/SHAWMUT - A70P50 - Fuses.

A70P Amp-Trap® Form 101 Semiconductor Protection fuses were developed for higher voltage AC and DC drives, UPS systems, reduced voltage motor starters and similar applications where lower l2
t and superior reliability are needed. A70P is a very popular fuse, available in a wide range of ratings. Typically used for replacement.

700VAC 50Amp

Very Fast Acting Semiconductor fuse.

Type 4 Form 1

150DegC Max.

Mersen, formerly Ferraz Shawmut

Applications: Protection of 700V or less DC drives, UPS, inverters, reduced voltage starters, etc.

Norte Removed from equipment/Used.

Mersen GOULD/SHAWMUT - TRS10R - Fuse.

The industry’s most popular fuse for motor circuit protection With advanced material technology added to the existing product, the Tri-Onic® TR and TRS current-limiting time-delay fuses are engineered for overcurrent protection of motors and transformers, service entrance equipment, feeder and branch circuits. TriOnic fuse’s proven time-delay characteristic safely handles harmless starting currents and inrush currents associated with today’s motors and transformers. Now available with optional SmartSpot® blown fuse indication technology.

10Amp 600VAC.

Time Delay.

Class H.

Dimensions: 2.0" x 9/16" (51mm X 14mm)

Mersen Gould/Shawmut - A13X70-4 - Fuse.

A13X AMP-TRAP FORM 101 SEMICONDUCTOR PROTECTION FUSES WERE DESIGNED FOR THE SPECIFIC PROTECTION OF DIODES AND OTHER SEMICONDUCTOR DEVICES RATED 130VAC. THE A13X PRODUCT LINE'S COMPACT DESIGN IS PERFECT FOR THOSE APPLICATIONS THAT HAVE LIMITATIONS ON AVAILABLE SPACE. 130 VOLTS 70 AMPS TYPE 4 CONNECTION.

Status: Discontinued

70 Amp 130V.

Fast acting semiconductor protection fuse, amp Trap.

Class: Semiconductor

Note: Type 4. Blade.

Dimensions: 0.996" D x 1.178" long, plus blades overall 2.679" long.

Each blade is 0.883" wide x 0.757" long, from fuse body.

New Older Stock.

Note: Silver blade tarnish doesw not affect operation.

Mersen Gould/Shawmut - AJT110 -  Fuse.

SmartSpot® with maximum circuit protection Amp-Trap 2000® SmartSpot AJT fuses now provide a visual open fuse indicator. With advanced material technology the AJT fuse provides IEC Type 2 No Damage
protection to main, feeder, and branch circuits, for all types of loads — yet, they require only half the mounting space needed for 600VAC Class RK fuses. AJT’s time-delay characteristics are ideal for handling typical motor and transformer inrush currents, while also providing superior current-limiting ability.

600VAC 110Amp.

Time Delay Fuse

Current Limiting Class J

HRCI-J. Blade.

Amp-Trap.

Dimensions: 1.635" D x 3.017" long x 0.195" thick.

New in Manufactures Packaing.

Applications: Motor circuits, Mains, Feeders, Branch circuits, Lighting, heating & general loads, Transformers, Control panels, Circuit breaker back-up, Bus duct, Load centers

Mersen Gould/Shawmut - A70P20 - Fuse.

A100P Amp-Trap® Form 101 Semiconductor Protection fuses are rated 1000V, extending the range of protection for UPS systems, AC and DC drives, reduced voltage motor starters and similar applications where lower I2t and superior reliability are needed. With ratings from 15 through 1000 amperes, a wide range of high voltage applications can be served.

700VAC 20Amp.

High Speed Fast Acting Semiconductor Fuse Type1.

Operating temperature: 150 Degree C.

Dimensions: 0.584" D x 2.002" long.

Amp-Trap.

New Old Stock

Applications: Protection of UPS systems AC/DC drives, reduced voltage motor starters and other 1000V or less semiconductor devices

Mersen Gould/Shawmut - A25X25 - Fuse.

300VAC 25Amp.

Form 101 Type 1

Mounting Type: Surface

Fast Acting, Current Limiting, Semiconductor Fuse.

Dimensions: 0.584" D x 2.002" long.

Alternate: M214325

UPC 616469728791

New Old Stock

Mersen, formerly Ferraz Shawmut

APPLICATIONS: Protection of 300 volt heavy duty rectifiers and similar heavy power supplies

Mersen Gould/Shawmut - A100P25 - Fuse.

A100P Amp-Trap® Form 101 Semiconductor Protection fuses are rated 1000V, extending the range of protection for UPS systems, AC and DC drives, reduced voltage motor starters and similar applications where lower I2t and superior reliability are needed. With ratings from 15 through 1000 amperes, a wide
range of high voltage applications can be served.

1000VAC 25Amp.

Fast acting Semiconductor Fuse

Type1 Form 101.

Operating Temperature: 150 Degree C.

Dimensions: 0.572" D x 2.636" long.

New Old Stock

Applications: Protection of UPS systems AC/DC drives, reduced voltage motor starters and other 1000V or less semiconductor devices