On Sale

Harris - V130LA2 - MOV, Metal Oxide Varistor.

The LA Varistor Series of transient voltage surge suppressors are radial leaded varistors (MOVs) that are designed to be operated continuously across AC power lines. These UL recognised varistors require very little mounting space, and are offered in various standard lead form options.

Working Harris - V130LA2 - oltage: 130VAC, 175VDC. 11 Joules.

Dimensions: 7mm disc.

Note: Device Branding 1302.

Transient Surge Suppressor.

Note: Harris Semi is GE Semi.

General Electric - V18ZA3 - MOV, Metal Oxide Varistor.

A resistor specifically designed so that its ohms value decreases with increasing applied voltage over at least a portion of its rated ohmic range.

Voltage Rating: 10V RMS, 14VAC/VDC

Peak, 0.4 watt 3.5 Joules.

Mount: Through Hole

Temperature: -55 c to 85 C

Package: 14mm D, Radial Leads.

Alternate: V18ZA3P

NSN 5905-01-267-2306

General Electric - V130LA1 - MOV, Metal Oxide Varistor, LA Series.

The LA Varistor Series of transient voltage surge suppressors are radial leaded varistors (MOVs) that are designed to be operated continuously across AC power lines. These UL recognised varistors require very little mounting space, and are offered in various standard lead form options.

Working Voltage: 130VAC, 175VDC. 11 Joules.

Dimensions: 7mm Disc.

Note: Device Branding 1301.

Transient Surge Suppressor.

Alternate: V130LA1P

General Electric - V250LA20A - MOV, Metal Oxide Varistor.

LA Series Varistors Are Listed Under UL File No. E75961 and E56529 as a UL Recognized Component.

Voltage: 250VAC 330VDC 72 Joules.

Transient voltage Surge Suppressor.

Package: 14mm Disc, Radial Leads.

Note: Line Voltage Operation.

Device numbering 250L20.

Alternate:V250LA20AP

Unidentified MFG - H79-55924-A2+4 - Inductor, Choke.

Inductance: 126uH

Hi Current. Toroidal.

Current: 13 Amp

Wire Size: 16AWG, 23 turns.

Connections: Quick Connect

Dimensions: 1.204" OD x 0.258" thick with an ID of 0.443".

New Old Stock

THOMPSON - 1N5239B - Diode, Zener.

9.1V 500mW.

Tolerance 5%.

Case: DO-35 Axial Leads.

Package of 20.

SANYO - CR2430 - Batteries & Accessories.

SANYO CR2430 3V Lithium Cell Battery wit two radial leads, see the pictures.

Lithium 3V Battery.

Package: Coin Type 2 Tab Leads.

Made in Japan

Application: Spare part for Pioneer and other devices.

New.

RAM - RAM1811 - Inductor, Coil.

Type Toroid, Low Radiation

Inductance: 150uH.

Current Rating: 3.6 Amp

Forty Five Turns of 20AWG magnet wire.

Mount: PCB.

Operating Temperature: -55 to 105 °C

Dimensions: 0.833" D x 0.423" deep x 0.849" high.

Lead spacing: 0.261" - 0.275".

Note: Batch 93-27.

Alternates: Uxcell a13071500ux0195, Bourns 2114-RC

Motorola - 1N5239B - Diode, zener.

9.1V 500mW.

Tolerance 5%.

Case: DO-35 axial leads.

Note: Leads are tarnishing.

New OLD Stock

Package of 50.

General Electric - 44A399746-G01 - REG8C Power Supply Board.

Status: Discontinued

REG8 1050 BATTERY CHARGE

3N8100PS102A1

FAB# 44B399267-001

BD# 442B399855-002/7

CNC/ PLC Controller

Note: Commercial Fixed Repair cost is as high as $1568

Removed from Working Controller.

Cinch Jones - 20-140 - 71785-20-140 - Connector, Terminal Block.

Type: Wire to Board, Series 140

Circuit Count: 20 Position (Dual Double Row).

Voltage Rating: 250V

Contact Ampacity: 15Amp.

Insulation Material: Solid Construction, Phenolic, Black.

Mounting Type: PCB or Panel, Flush.

Density : Pin Spacing: Center to center distance between terminals 0.375".

Distance between row centers 0.313".

Connection: 5-40 X 3/16" Screw.

Contact Material: Nickel Plated Brass Contacts and Hardware

Outside Dimensions: 8.157" Length x 0.875" wide x 0.406" High.

With four unthreaded mount holes at approximately 7-15/16" centers.

Mounting Holes are 0.160" D.

NSN 5940-00-088-2566.

New Old Stock

BUSSMANN - LPJ3 - Fuse.

3Amp 600VAC.

Dual Time, Delay Element, Current Limiting.

Class J.

New Old Stock

BUSSMANN - LPJ200SP - Fuse.

200Amp 600VAC.

Dual time

Delay element

Current limiting.

Class J.

New

TE Connectivity AMP INC - 206322-9 - Hardware, Cable Clamp.

For Amp Inc circular connector.

Type: Backshell, Cable Clamp

Cable Opening: 0.703" (17.86mm)

Diameter – Outside: 1.131" (28.73mm)

Shell Size – Insert: 17

Thread Size: 15/16-20 UNEF

Cable Exit: 180°

Size 17.

Bundle diameter: 17.86mm.

hermoplastic.

Kit.

MAGNECRAFT/S&D - W101VMPCX-1 - Relay, Reed.

6VDC, 130VAC/200VDC

50 Ohm Coil

10VA NO, In-Line Dry Reed. Relay

Dimensions: PCB Mount 4 pin.

Case: 1.137" x 0.613" x 0.373 High.

New Old Stock

MAGNECRAFT/S&D - 11PCX-44B - DPDT-5Amp 110VDC

Open Frame

Coil Resistance: 14500-Ohm

7MA Plate Relays 14.5K-Ohm

New Old Stock

EAO SWITCH - 704.01-1892BX - Pushbutton Momentary Actuator for Series 4 Oil & Watertight switches.

Operation: SPST (On)

Voltage: 250V

Power: 2.4 Watt.

Mount: Single Hole 22.5mm (0.885") Diameter.

Terminals: Screws

Cap Color: Red.

Note: Body Marked 704.950.0

Protection: IP65

Approvals: UL, CSA

More info: http://www.eao.com/eus/en/products/condensedcatalogue/byseries//series_04.pdf

Made in Switzerland

BALDOR - 35B11-372 - 1.5 HP Motor, AC.

Supply Voltage: 208-220/440V 60 Cycle

3-Phase, Class A.

N/P Current: 5.0-4.6A/2.4A.

Speed: 1725 RPM.

Frame Size: 56,  520M.

Catalog: 143154 

Temperature: 40 C Ambient

Excellent Condition - Made in USA

CSA

RBM CONTROLS - KU93-4030 - HN61KL030B Relay, power.

Status: Discontinued

Input: AC.

Contacts: 3PDT.

Contact Ratings: 10Amp.

Coil Voltage: 24VAC 50/60Hz (10FLA 30LRA 125V 60Hz, 5FLA 15LRA 250V 60Hz).

Connections: 3/16" male QC terminals.

Mech Mtg: PCB or can be socketed.

Packaging: Plastic enclosed.

Note: Used/Removed from equipment.

Applications: HVAC Systems (Carrier Products HN61KL030)

Made in USA

Honeywell / Klockner-Moeller - 620-0038 VR1.0 - Control Network Module VR1.0, PLC Module 

Status: Discontinued

New Sealed Box.

Honeywell / Klockner-Moeller

New Old Stock

EAGLE SIGNAL / DANAHER - 191-11B601 B82 - 0-8 HOUR TIMER

For over 70 years, Eagle Signal has been the leading supplier of timer solutions for a range of industrial applications all over the world.The Model 191 is a push-button start, motor driven timer with cycle progress pointer, double make-double break snap action switch and is used to energize a load for a preset time period. The pushbutton is located in the center of the time set pointer knob on the panel mounted dial. When depressed momentarily, a mechanical latch and switch is engaged, starting the motor and timing period. After completion of timing, switch 3 and 4 open, 1 and 2 close, motor stops, and timer resets to setpoint. Timer is now ready for another timing operation.

Voltage: 120/240VAC 60Hz, 1/2hP 125VAC, 3/4HP 250VAC 

Current Rating: 10A

Repeat Accuracy: 1.5% of Full Scale

Termination: Motor - Loose Leads, 20 Ga., 6" long stripped 5/8"

Termination Switch: .188 x .250 x .020 Quick Connect Tabs

LR27967

PUSH BUTTON AUTO-RESET TIMERDANAHER 

GW-EAGLE SIGNAL INDUSTRIAL CONTROLS

Approvals: UL, CSA

Made in USA

Manufacturer's Specification In Package.

New Old Stock

CUTLER-HAMMER - 47A4446G36 - Hardware.

Shaft assembly for Molded Case Circuit Breaker Accessory Handle Mechanism.

Amperage Rating: 30-60-100-200 Amp switches.

Series: Series C

Shaft Length: 6.5 in

UPC 786679-65180.

Style 47A4446G36.

C & K Components - 8125SD9AB - 8125SD9AB8E - Switch, Pushbutton.

Contacts: SPDT, Sealed.

Contact Ratings: 0.4VA 125VAC.

Contact Material: Gold

Actuator: On-Momentary Plunger.

Connection: PC leads.

Mech: PCB Right Angle

Body: 12.9mm long x 6.8mm wide x 10.6mm high.

Miniature, Sealed Contacts.

Bushing: 7.3mm long.

Actuator: 5.7mm long.

Alternate: 8125-SD9-AB-E

Made in USA

AIRPAX - M55629/4-UNED -  Circuit Breaker.

2P 20Amp 240V. 60Hz.

Mount: Panel, 4 holes at 2.2" centers

Dimensions: 1.490" wide x 2.513" high x 1.850" deep.

With SPDT aux switch.