On Sale

Cutler-Hammer / Eaton * - 8803K10 - ST42A - Switch, toggle.

Contacts: SPST.

Actuator: On-Off.

Mech: Panel, single hole mount.

Body: Threaded bushing length: 0.493".

Lever length: 0.705".

Dimensions: 1.144" long x 0.631" wide x 0.617" high.

Contacts: 2 solder terminals.

Complete with washers and nuts.

Note: Double marked ST42A.

NSN 5930-00-112-5288

New Old Stock

Applications: Aircraft Toggle Switch

Learn More

CUTLER-HAMMER - SA21GEX1 - Switch, pushbutton.

SPDT Push-ON/Push-OFF.

Alternate Action, 5A 125VAC.

Material: SS.

Panel Mount

Threaded bushing length: 0.467".

No actual actuator, but length here is: 0.196".

Dimensions: 0.518" long x 0.523" square x 0.515" high.

Contacts: 3 solder terminals.

Made in Japan

Learn More

Eaton CUTLER-HAMMER - MS35058-26 - 8804K13 - Switch, toggle.

SPDT On/ON(Mom).

Double marked 8804K13.

Maximum voltage: 220VAC/250VDC.

Threaded bushing length: 0.513".

Actuator: sealed 0.675".

Dimensions: 1.14" long x 0.647" wide x 0.618" high.

Contacts. 3 screw terminals.

Learn More

Eaton CUTLER-HAMMER - 8690K11 - Switch, Toggle.

DPDT, 2 position, 15Amp 125VAC/10Amp 250VAC.

One Hole Panel Mount.

Dimensions: 2.5" long x 1.158" wide x 1.055" high. 0.95" behind panel.

Contacts: 6 screw terminals.

New Old Stock

Alternate: TE Connectivity 8690K

Learn More

Safran Eaton CUTLER-HAMMER - 8511K7 - Switch, toggle.

DPST, Off/ON(Mom).

Threaded bushing length: 0.461".

Lever length: 0.681".

Environmentally sealed.

One hole mount.

Dimensions: 1.324" long x 0.891" wide x 1.224" high.

Contacts: 4 screw terminals.

Complete with hardware kit.

 

Learn More

Safran Eaton CUTLER-HAMMER - 8511K6 - Switch, toggle.

DPDT Center-Off, 3-position

Bushing length: 0.450".

Lever length: 0.680".

Environmentally sealed.

One hole mount.

Dimensions: 1.327" long x 0.897" wide x 1.230" high.

Contacts: 4 screw terminals.

Complete with hardware kit.

New Old Stock

Learn More

Safran Eaton CUTLER-HAMMER - 8511K1 - Switch, Toggle.

DPDT On/Off/On.

Bushing length: 0.433".

Lever length: 0.694".

Environmentally Sealed.

One Hole Mount.

Dimensions: 1.333" long x 0.900" wide x 1.230" high.

Contacts: 6 Screw Terminals.

Complete with washer and nut.

New Old stock

Learn More

Switch, toggle. SPST, 2-Position, One hole mount. Environmentally sealed. Dimensions: 1.253" wide x 0.601" deep x 1.173" high. Contacts: 2 screw terminals. Complete with hardware. Learn More

Cutler-Hammer / Eaton * - 8373K8 - Switch, Toggle.

DPST 6Amp @ 125VAC, 3Amp @ 250VDC.

Threaded bushing: 3/8" x 0.355".

Actuator: 0.50".

Dimensions: Overall 1.153" long x 0.687" wide.

Termination: 6 Solder Terminals.

Genuine Cutler Hammer - New Old Stock

Military NSN 5930-00-259-8341.

Learn More

CUTLER-HAMMER - ST40F - Switch, Toggle.

Contacts: SPDT.

Contact Ratings: 10Amp 115VAC.

Actuator: On-On (Mom).

Connection: screw.

Mech: Panel. Panel hole: 1.134" long x 0.637" wide x 0.684" high.

Standard 15/32" threaded bushing x 0.529" long (seated).

Actuator: 0.695" long.

Note: Complete with hardware.

MS P/N: MS35058-26.

Former P/N: MS35058-6.

Proudly Made in USA

 

Learn More

CADDOCK - MP821-0.050R Resistor, Power Film.

Resistance: 0.050 Ohm.

Power: 20 watt @ 25 Deg C if Heatsinked.

Tolerance: 1%.

Maximum Voltage: 300V.

Temp coef: TO-220-2,

Micronox Film Bonded to Copper.

Note: Kool-Tab, Non-inductive.

Excellent transparency for tweeter networks.

Learn More

BERGQUIST - P-1755-02 - KEYPADS 48 Switch's

Membrane touch switches are sometimes referred to as membrane switches or touch switches. Generally, a membrane touch switch is a momentary electrical on/off switch for activating and de-activating a circuit. ... An overlay is applied to the first surface of the switch as the graphic interface.

Very flexible 10-1/4" wide x 7-1/8" deep

Connection: 24-Pin (F) connector 2-7/8" long x 1/8" deep with 2.2mm lead spacing.

Learn More

PROM DIP/NEW 32X8 SCHOTTKY T/S Learn More

WOLVERINE - TAAPA0001 - Page Adapter+

Telephone Product

With HSAACC002 Power Adapter - 120VAC Input/12VAC 1A Output

Proudly Made in USA 

Learn More

Varo - H477-1 - Diode, High Voltage.

Ratings: 12KV 10mA.

Package: Axial Leads.

Size: 25.5mm (1.007") long x 6.3mm (0.251") Diameter.

Genuine Varo - New Old Stock- Slight Lead Tarnish does not impact Operation

Alternate: HL1200

Learn More

Telephone access box with (12) 4 Pin Modular Phone Jacks (Mod Packs) to a 50 Pin Male Centronics Connector.

Learn More

Sprague - 81D471M200MB5 - Capacitor, Electrolytic.

Ratings: 470uF 200V.

Snap-in.

Dimensions: 35.2mm D x 31.3mm high.

Temp Max +105 Deg C.

Lead Spacing: 10mm.

Alternates: 80D471P200MB2DE3, ALC40A471CB200, MAL215972471E3

 

Learn More

NEC Corporation - PS2505L-4 SMD - IC. Phototransistor Optically Coupled Isolator.

High isolation voltage (BV = 5 000 Vr.m.s.)

High collector to emitter voltage (VCEO = 80 V)

High-speed switching (tr = 3 µs TYP., tf = 5 µs TYP.)

Case: 16 SMD Gull-Wing.

Learn More

CUTLER-HAMMER - SA1RW20 - Switch, Pushbutton.

SPST NC. Ultra Miniature.

bushing: 0.119".

Actuator: Red 0.165".

Dimensions: Body - 0.25" D round x 0.362" high.

Contacts: 2 PCB tab/lugs.

Learn More

Philips - MKT344HQ - Capacitor, Mylar (Metalized Polyester).

Ratings: 0.1uF 250VDC.

Tolerance: 10%.

Package: Radial.

Dimensions: 17.2mm wide x 5.0mm deep x 10.4mm tall .

Lead Spacing: 14.5mm.

Package of 5.

PCB Mount.

New Old Stock

Applications: Excellent Audio Coupling Capcitor.

Alternate/Equivalent: MEPCO 719A1GD104PK251.

Learn More

NICHICON - UVR2A220MEAITD - Capacitor, Electrolytic.

Ratings: 22uF 100V.

Tolerance: 20%.

Material: Aluminum.

Package: Radial Leads.

Dimensions: 6.30mm D x 11.mm.

Lead Spacing: 0.078" (2mm).

Operating Temperature: -40 to 85 Deg C.

Package of 10.

Learn More

ELECTRO CAP - F3670K - Capacitor, Polypropylene.

The best capacitor types for audio circuits are polystyrene and polypropylene. 

Ratings: 28uF 100VDC.

Tolerance: 10%.

Package: 5 Wire Leads.

Dimensions: 2.1" x 2.2" D.

For Cross Overs.

New Old Stock

Learn More

SPC Technology / SAMAR - 4-876-R - SPC15375 - Connector, Binding Post.

Dual Binding Post with Base that is a Versatile Ideal Interconnect. 

Dual 5-way Binding Post.

Both Sides Red.

Rated for 15 Amps.

Voltage Rating: 500V

Both Posts are Electrically Insulated from Panel.

Accepts Banana Plugs, Pin Plugs, Spade Terminals, Alligator Clips and Bare Wire.

Nickel Plating Over Brass.

Accepts 16 AWG Wire

Thread Size: 6-32, Screw Size: #6

Insulators and Bases are Nylon.

Material: Red Nylon Mounts on 0.74" centers.

SPC Technology / SAMAR.

Individually Packaged

Alternates/Similar: SPC15475, Pomona 6883, 4243-2, 3760-2, 3750, 3770

Made in Taiwan

Learn More

Vishay DALE - NHL25-10R - Resistor, Ceramic.

Ayrton–Perry windings of resistance wire used to make wirewound RF resistors are used at high frequencies, where inductance and capacitance are unwanted.

The winding is made of two separate wires wound in opposing directions along an insulating form and connected in parallel at the ends. Since there are the same number of turns of wire in either direction, the magnetic fields of the two wires cancel each other out, so the coil has little inductance; and since adjacent turns of the two wires are at approximately the same voltage, there is little parasitic capacitance between the turns.

One disadvantage is that because the two lengths of resistive wire are connected in parallel, four times the length of wire (twice the length for each coil) is needed to make a given resistance, compared to when a single coil is used so they are more expensive than inductive wirewound resistors.

10 Ohm.

Power: 25 watt.

Tolerance: 5%.

Technology: Wirewound Non-Inductive with Ayrton-Perry Winding.

Dimension: 2.0"L x 0.7"D.

Weight: 1oz.

Genuine Dale - New Old Stock

Alternate: FST025-10-5%NI, FST02506E10R00JENI

Learn More