On Sale

Resistor, carbon composition. Resistance: 2 Meg Ohm. Power: 1/4 watt. Tolerance: 5%. Package: axial lead. Note: Color code: Red Black Green Gold. Package of 50.

AAVID Thermalloy - 5759 - 575903800000G - Hardware, Heatsink.

For Use with TO-3 Components.

Aluminum With Black Anodized Coating

Thermal Resistance: 9.80

Overall Dimenasions: 1.630" X 1.290" X 1.250"

12 Fins, 0.092" thick.

Two mounting holes 1.187" (30.15mm)  centers.

Overall dimensions: W 1.290" x L 1.630" x H 1.250" (32.77mm X 41.40mm X 31.75mm)

CENTRAL Electronics - 2N5366 Transistor, PNP. Bipolar Transistors - BJT PNP Switch Amp

Max voltage: 40V.

Max current: 500mA.

Dissipation: 625mW.

Package: TO-92 plastic, formed leads.

Operating temperature: -55 to 150 Deg C.

Application: Designed for general purpose amplifiers applications at collector currents to 300mA.

Note: Central Semiconductor Corp.

Texas Instruments - TIP145 Transistor, PNP.

Voltage: 60V.

Current: 10Amp.

Dissipation: 125 watt.

Operating temperature: -65 to 150 Deg C.

Package: TO-218,

Note: Silicon darlington.

TECCOR - T106D1 SCR, Silicon Controlled Rectifier.

The Teccor line of sensitive SCR semiconductors are half-wave unidirectional, gate-controlled rectifiers (SCR-thyristor) which complement Teccor's line of power SCRs.

Voltage: 400V.

Current: 4Amp.

Mount: PCB.

Package: 3-Lead Compact. Two leads one side, one lead opposite side.

Note: Sensitive gate.

House numbered 375.

Manufactures box is labeled T106D1.

Alternate: SOT-223

Motorola - MMBT3906LT1 Transistor, PNP.

Max voltage: 40V.

Max current: 200mA.

Dissipation: 300mW.

Package: SOT-23 SMD molded plastic.

Operating temperature: -55 to 150 Deg C.

Package of 50.

Note: Small Signal. Epitaxial planar.

Alternate / Equivalent: Infineon BC807-25E6433

Vishay HEI - FST10/10K NI Resistor, Tubular Ceramic. 10K Ohm.

Marked NI: Non-inductive style (special “NI”) with Ayrton-Perry winding. Ayrton–Perry windings of resistance wire are used to make wirewound RF resistors that are used at high frequencies, where inductance and capacitance are unwanted.The winding is made of two separate wires wound in opposing directions along an insulating form and connected in parallel at the ends. Since there are the same number of turns of wire in either direction, the magnetic fields of the two wires cancel each other out, so the coil has little inductance; and since adjacent turns of the two wires are at approximately the same voltage, there is little parasitic capacitance between the turns.

Resistance: 10K Ohm (10,000)

Power: 12 watt.

High Temperature Silicone Coating

Complete Welded Construction

Technology: Ayrton-Perry winding Wirewound Non-inductive.

Operating Temperature: -55 °C to 350°C

Dimensions: 1.761" (44.7mm) Long x 0.394" (10mm) Diameter

Two 3/16 Quick Connect Terminals.

Element:  Copper-nickel alloy or nickel-chrome alloy, depending on resistance value

Core: Cordierite, steatite

More info: https://www.vishay.com/search?searchChoice=part&query=FST10%2F10K

Huntington Electric Inc. - New Old Stock

Alternates: MILLS-71928, FST010

Made in USA

TE Connectivity AMP INC - 206044-1 Connector, Circular.

206044-1 is a plug with UL94V-0 flame-rated thermoplastic housing and free-hanging mounting.

14 Position Plug.

Shell Size: 17.

15/16-20 UNEF-2A Thread

Operating Voltage is 600VAC/DC

Operating temperature range from -55 to 105°C

Material: Thermoplastic, Black.

Mount: Cable Mount, Free Hanging.

No Contacts.

Note: Will mate to Amp Inc 206043-1, not included.

Alternate: Newark 94X3368, Mouser 571-206044-1

Equivalent: ITT Cannon DL2-J/S

TE Connectivity AMP INC - 206043-1 Connector, Circular.

14 Position receptacle/female.

Shell size: 17.

Material: Thermoplastic, Black.

Mount: panel/flange.

No contacts.

Note: Mates to Amp inc 206044-1 not included.

TE Connectivity AMP INC - 206070-1 Hardware.

Cable Clamp Kit #17.

Shell Size 17.

Circular T Black.

Note: Will mate AMP INC connector 206044-1, 206043-1, not included.

(See SKUs 139588 & 139589)

U.S. Tsubaki 48666 20AWG/7C Shielded Cable, 600 Volt, PVC Jacket, Continuous Flex.

Cables for Motion - Continuous Bending, Hi-Flex Electrical Cable. Continuous Flex for Dynamic Applications

20-12C. shielded Cable (20 AWG 7 Conductor).

Conductor type: Copper

Operating Temperature: -5 to 80 C.

Voltage Rating: 600 Volt

Max. OD: 9.3mm

Weight kg/m: 0.137

Cu index kg/m: 0.066 

Insulation: PVC Jacket

UV-resistant, RoHS compliant, CFC-free, Silicone free, flame-retardant, ozone resistant

Approvals: UL, cUL

Applications: Crane and conveyor equipment, Monitoring , measuring and controls, Medium to Heavy Loads.

Priced by the Foot, Minimum Order Length: 25'.

EATON - Heinemann - AM2-B3-A - AM2-Z74-1 - Circuit Breaker, 2 Pole, 0.625A Trip, 65VDC, TD #2.

Hydraulic Magnetic Circuit Breaker

2Pole 0.625 Amp Trip, 0.5 Amp Hold.

Time Delay: 2.

Mount: Panel.

Dimensions: 1.509" wide x 2.508" high.

Note: Double marked AM2-Z74-1, P/N 1942404A10.

Listed: UL/CSA.

Eaton / Heinemann.

90061A005 - PT-015 - Hardware.  Fibre Shoulder Insulating Washer

Shoulder washers, sleeve bushings or flanged bushings are designed for a variety of applications. A shoulder washer insulates a screw, rivet or wire from a chassis or assembly. ... The flange on the bushing is used to positively locate the bushing when it is installed or to provide a thrust bearing surface.

Size: 4 Screws /Fasteners,

OD: 0.385" 

Material: Hard Fiber

Max. Temperature: 230F

Material: Fibre, Commercial Grade per ASTM D710

Alternate: 90061A005, WAF265 

Package of 100.

Cable. Single 20AWG Stranded Hook-Up Wire with one Female 3/16" Quick Connect Terminal.

Hook up wire is an insulated conductor wire used in many electronic applications. It can be used in electronic equipment, automotive and marine applications, ovens, control panels, building construction, appliances, and many other open and enclosed electronic applications.

Length 8 feet Black.

Voltage Rating: 300 Volt

UL1007 Stranded Copper Wire

Temperature: -40C to 105C

Bundle of 4.

Hardware. Shoulder / Insulating Spacer / Washer

Shoulder washers, sleeve bushings or flanged bushings are designed for a variety of applications. A shoulder washer insulates a screw, rivet or wire from a chassis or assembly. ... The flange on the bushing is used to positively locate the bushing when it is installed or to provide a thrust bearing surface.

Shoulder Washers are designed to provide electric and heat insulation in assemblies where this is a crucial requirement. These products are self-lubricating and corrosion- and abrasion-resistant.

Size: # 8 Screws,

Dimensions: 0.560" OD  x 0.170" ID x 0.260" Overall Thickness

Material: Hard Fiber, Nylon

Max. Temperature: 230F

Package of 40.

Hardware. Shoulder / Insulating Washer

Shoulder washers, sleeve bushings or flanged bushings are designed for a variety of applications. A shoulder washer insulates a screw, rivet or wire from a chassis or assembly. ... The flange on the bushing is used to positively locate the bushing when it is installed or to provide a thrust bearing surface.

Size: Shoulder 8/32" 

Material: Nylon

Temperature: -40 to 185F

Package of 25.

Hardware. Shoulder / Insulating Washer

Shoulder washers, sleeve bushings or flanged bushings are designed for a variety of applications. A shoulder washer insulates a screw, rivet or wire from a chassis or assembly. ... The flange on the bushing is used to positively locate the bushing when it is installed or to provide a thrust bearing surface.

Material: Nylon Plastic

Temperature: -40 to 180F

Package of 40.

Texas Instruments - TMS4016-25NL - IC, Memory. 

Status: Discontinued

SRAM 2048-word bt 8 Bit.

Package: 24 Dip, Tarnished Leads.

Note: Used/Removed from equipment.

Vintage, Rare & Old.

Vishay Milwaukee Resistor Corporation - MRC 12/04 Resistor, Ceramic Brake Bracking.

Dynamic Braking Systems are used in applications such as: centrifuges, pumps, fans, certain conveyor belts, rapid/ continuous braking, and applications that require rapid slow down and reversing. The braking resistors market can be categorized into energy, oil & gas, mining, marine, automobile, and others.

Advantages - Dynamic braking resistors versus Friction braking

• Lower wear of components.

• Control motor voltage within safe levels.

• Faster braking of AC and DC motors.

• Less service required and higher reliability.

Resistance: 10 Ohm. Ribbed, Ribwound Enamel Coated.

Technology: Wirewound. 500 Watt

Ribbed construction aids in rapid cooling

Designed for equipment requiring low resistance
loads at low ohmic values and high current capacity.

Dimensions: 10-1/2" long x 1-3/4" D OD with 1-1/8" ID.

Color: Brown.

Global Model Number RBEF0500B

Alternate: Ohmite E500K10R

Used, As Removed

Proudly Made in USA

NAMCO CONTROLS - EE230-30421 Rotatable Cylindicator Proximity Switch.

Weld Field and Electrical Noise Immunity

3000 PSI Pressure Rating

Standard Latching Short Circuit Protection

Predictable, Consistent Electrical Performance

100% Tested and Burned-in

Purpose-Designed Housings and Materials

Internally Short Circuit Protected

1.0" Plastic Probe

20-140VAC/VDC 0.5A Continuous . - 3Amp inrush.

1.7mA Leakage Current Off State

8 foot 2 Conductor 18AWG SJO Power Cord.

Ready & SCP LED Indicators 

Replacement for EE220-30421.

New Old Stock

Note: Snap-Lock, Mill-Pack, Hard-Coat, and Dura-Prox are all trade names of NAMCO - Specialty Product Technologies. 

Proudly Made in USA

Herman Smith Inc - BP24-02 Hardware, Washer.

Dress washer for installing flathead type screws in non-countersunk holes.

1/4" hole and 1/2" outside diameter.

Package of 50.

Engineering Components Co EC2- WS-2060 - Passive Delay Line, SIP.

Wee SIP Passive Delay Lines manufactured by Engineered Components Company are designed to provide precise and stable delays for analog delay line applications. These untapped delay lines are provided in a small 4-pin SIP packages. These delay lines are designed and tested in accordance with MIL-D-23859 and they are capable of meeting the environmental requirements of MIL-STD-202 for moisture resistance, vibration, temperature cycling, humidity, and life.

Delay Time (nS): 60 +/- 2.5

Rise Time (nS): 22.0

Impedance (Ohms): 200

DCR (Ohms) 3.0

Working Voltage: 25 VDC

Dimensions: 0.400" X 0.200" X 0.180" 

Package: SIP.

New Old Stock

Proudly Made in USA

TE Connectivity AMP TYCO ELECTRONICS - 205089-1 - M39029/64-869 - Connector, Pins.

Size 20 D-Subminiature Contact Pin (Family HD-20)

Male Tri-Band Pins.

Wire size: 24-20AWG.

Length: 9/16".

Contact Plating: Gold

Contact Material: Coppy Alloy

Mounting Type: Crimp

Note: AMPLIMITE Series 109.

Package of 10.

AMP INC - 745370-1 Connector, D-Sub.

HDF DB15 Standard Plug.

Gender: Male

Number Positions: 15