On Sale

ST Microelectronics - VN330SPTR-E Relay, SSR.

Quad high side smart power SSR.

Vcc: 36V.

Vcc / Vdemag: 55V.

0.7Amp.

RDS on: 0.32 Ohm.

Package: SO 10 SMD, exposed bottom pad.

Lead free.

RoHS compliant.

Motorola - HEP573 IC, RTL. Hex Inverter.

Case: 14 Dip.

New.

Note: Cross NTE9989.

Intel - P8253-5 IC, Timer.

Status: Discontinued

Programmable interval timer.

Case: 24 Dip.

Additional Information: http://www.datasheetcatalog.com/datasheets_pdf/P/8/2/5/P8253-5.shtml

Rare & Difficult IC to Find 

Note: Clean socket pulls. Used/Removed from equipment.

Gould AMI - S2350P IC - Transceiver Circuit. Universal Synchronous Receiver/Transmitter (USRT)

The S2350 USRT is a single chip MOS/LSI device that totally replaces the serial-to-parallel and parallel-to- serial conversion logic required to interface a word-parallel controller or data terminal to a bit-serial, synchronous communication network. The USRT consists of separate receiver and transmitter sections with independent clocks, data lines, and status. Common with the transmitter and receiver are word length and parity mode. Data is transmitted and received in a NRZ format at a rate equal to the respective input clock frequency.

500 KHz Data Rates; Internal Sync Detection

Fill Character Register; Error Status Flags

Double Buffered Input/Output

Bus Oriented Outputs

5-8 Bit Characters; Odd/Even or No Parity

Single Power Supply (+5v)

Input/Output TTL Compatible

Case: 40 DIP.

New Old Stock.

Applications: Used in varous floppy controllers including Heath H17/h88-1 and PERCOM 55-50 bus.

Advanced Micro Devices - P8253-5 IC, Timer.

Status: Discontinued

Programmable Interval Timer.

Case: 24 Dip.

Note: Clean Socket Pulls.

Used/Removed from equipment.

Rare and Difficult IC to find.

12AWG FEP ORANGE - 12 AWG Cable, Hook-up, Teflon.

FEP Insulated Cable and FEP Wire are used in applications involving high temperatures and harsh environments. FEP Insulation is inert in most chemical environments and exhibits excellent resistance to high temperatures. It displays outstanding low-temperature toughness. FEP Insulated Wire and Cable also displays very low flammability, excellent weather resistance and electrical stability. FEP Insulated Wire is commonly used in chemical, electrical, and medical applications and maintains its properties in temperatures ranging from -200° C to +200° C (or -328° F to +392° F).

12-1C. (12 AWG 1 Conductor).

Conductor Type: Stranded, Silver Coated Copper 19/25.

Jacket Color: Orange, Polytetrafluoroethylene (PTFE)

Applications: Military Harnessing, Medical Electronics, Power Supply Lead Wire, Appliance Wiring

Priced per Foot

Minimum Order Length: 50'.

Alternate: 121925 OR005

Hewlett Packard - X375A Variable Attenuator Flap, X Band

8.2 -12.4 GC

Accuracy: +/- 1dB @<10dB, +/- 2dB @>10dB

Range: 0-20dB

SWR: 1.15 Max.

Power: 2 Watts

Length 7 3/16"

weight: 5 Lbs

25 dB Max.

OFC - MC794A5-047 Precision Crystal Oscillator

OFC - Oak Frequency Control Group

22.400MHz Full Size Crystal Can

Hermetically Sealed 

Additional Information: http://www.n4iqt.com/OFC-MC834X4-018W/DB_appnotes.pdf 

RJ12 Input to 2 Way Outlet RJ11 Phone Modular Jack Line Splitter Adapter 6P4C Beige.

Easy to Connect telephone adapter is used to connect the line or the single jack of the telephone socket, with accurate signal transmission and clear sound quality for 2 way Outlet.

Durable High quality phone line splitter made of ABS material, non-toxic and harmless, Long Life.

Short length eliminates unnecessary clutter behind the phone and improves signal strength. 

1 Male Plug RJ12 to 2 Female Duplex Sockets, 6P4C RJ11 plug.

Single socket used to connect to line or telephone outlet

Double socket end used to connect 2 devices (Telephone, Fax, etc.)

Durable construction with ABS UL 94-V2 housing and thick gold plating on contacts

Approximate Dimensions: 165X26X21mm / 6.5”x 1.0”x 0.83”

Telephone, Splitter. "Y", Male 6 pin phone connector to 4 pin female out on a 4" pigtail.

Applications: Telephone, Fax Machine, Ooma VOIP telephony unit, Office Equipment.

Alternates: a14122900ux0039, 9SIA623HZ28791, SPM7921066923, a14062600ux0566

RJ11 is an older version of RJ12, and they are the same size. The difference is that RJ11 uses four internal wires (called conductors) while RJ12 uses six. RJ12 is backwards compatible with RJ11, but RJ11 will not work with RJ12.

Hardware, Control /Instrumentation Knob with Pointer Indicator.

Fits Standard 1/4" (0.250") Splined ID Shaft.

Push-on Design for Convenient Secure Attachment

Bar Skirted with Indicator Pointer.

Material: ABS Black Plastic.

Dimensions: 0.98" OD x 0.60" high.

Applications: Control Devices (potentiometer, tuner, etc.) on a Radio, Amplifier, Testing Equipment or Musical Instruments, etc.

Vintage - New Old Stock

Vishay - S102C 50K000 - High Precision Foil Resistor, 50.000K Ohms (50,000) 0.01%

The S102C 50K000 0.01% is a through-hole Foil Resistor with Bulk Metal® foil (BMF) technology for applications that require high precision and high stability. BMF technology allows us to produce customer orientated products, designed to satisfy challenging and specific technical requirements. It offers low TCR, excellent load life stability, tight tolerance, fast response time, low current noise, low thermal EMF and low voltage coefficient, all in one resistor. The S series is virtually insensitive to destabilizing factors. The resistor element is a solid alloy that displays the desirable bulk properties of its parent material, thus it is inherently stable and noise free. The S series resistor is the modern generation of precision resistor. The standard design of this resistor provides unique combination of characteristics found in no other single resistor.

Operating Temperature: -55 C t0 175 C

Composition: Bulk Metal Foil

Features: Moisture Resistant 

• Non inductive, non capacitive design
• Non hot spot design
• Lead (Pb)-free or tin/lead alloy terminal finish
• <0.08µH Typical low inductance
• <0.1ppm/V Voltage coefficient
• 0.05µV/°C Typical thermal EMF
• 1ns Effectively no ringing rise time
• Electrostatic discharge up to 25000V
• Voltage Rating 300V
• Tolerance: 0.01%
• 0.6W
• 4.5PPM
• Radial Leads
• Proudly Made in USA

WARMINSTER - CW Industies - GF-861-0002G - Switch, slide.

Contacts: 3PDT.

Contact Ratings: 3Amp 125VAC, 125VDC.

Mech: PCB 6 solder leads, with 1.101" mt ctrs (27.9mm).

Body: 35.9mm long x 18.2mm wide.

New Old Stock

Hardware, knob. For 1/4" half flattened shaft.

Knurled.

Dimensions: 0.518" (13.1mm) D x 0.502" (12.7mm) high. (ID 6.4mm x 5.6mm).

Color: black.

TELEDYNE - 2N3456 Transistor, N CH FET.

Max voltage: 50V.

Max current: 10mA.

Dissipation: 300mW.

Note: Silicon.

OHMITE - CU5011 Potentiometer.

Resistance: 500 Ohm.

Power: 2 watt.

Tolerance: 10%.

Technology: Molded composition.

Dimension: 1.16" (29.4mm) D x 0.625" (15.9mm) behind panel.

Long shaft 0.375-32 thread, round 1/4" (6.35mm) D x 2" (50.8mm) bushing and shaft. Note: Mount: Panel. Rotation 312 Degree, +/-3%, 500V.

Linear. Type AB. New.

Cross RV4NAYSJ type.

Connections: solder.

National Semiconductor Corp - LM555H/883B IC. Timer.

Package: New TO-99 Gold Leads.

Some may have test dots.

Operating Temperaure: -55 C to 125 C

Storage Temperature: -65 C to 150 C

Bulk Packed

NSN: 5962-01-131-1230

NATIONAL RESISTOR - SR1206-102JT Resistor, metal alloy.

Resistance: 1K Ohm.

Power: 1/8 watt.

Tolerance: 5%.

Package: SMD 1206.

Package of approximately 4570 pieces.

Honeywell - FENWAL ELECTRONICS - 140-102FAG-RB1 - Thermostat, Thermistor.

Fenwal Electronics is a global manufacturer of Bimetal Thermostats, Discrete and Packaged Thermisters, Thermal Cut-Offs and and Flexible Heaters designed for application in small appliances, office automation equipment, medical and dental equipment, commercial and military aircraft and aeropace and satellite equipment. Fenwal Electronics is now part of the Thermal Sensors Group of Honeywell Sensing and Control.

Series 140

1K Ohm NTC Radial Bead. (1000 Ohms)

Low-Cost with Maximum temperature of 150 C (302 F)

Resistance Ratio: 6.95.

Res Tolerance: 10%.

Termination Material: Tinned Copper

Dissipation Constant: 4mW / deg C. 0.075"L x 0.1"D less leads.

Mounting Type: Through Hole, 0.15" spacing.

Honeywell. 140-102FAG-RB1 Rev-B.

Resistance Ratio: 6.95.

Beta: 3468

Res Tolerance: 10%.

Dissipation Constant: 4mW / deg C. 0.075"L x 0.1"D less leads.

Mounting Type: Through Hole, 0.15"spacing;

Honeywell. 140-102FAG-RB1 Rev-B.

Burr Brown - DAC7634E IC, D/A Converter.

The DAC7634 is a 16-bit, quad voltage output, digital-Unipolar or Bipolar Operation to-analog converter with specified 15-bit monotonic.

Low Power: 10 mW

Unipolar or Bipolar Operation

Settling Time: 10 µs to 0.003%

15-Bit Linearity and Monotonicity: –40°C to 85°C

Programmable Reset to Mid-Scale or Zero-Scale

Double-Buffered Data Inputs

16-Bit, quad voltage output.

Package: 48 SSOP SMD.

BOURNS - 4116R-001-101 Resistor, network.

Resistance: 100 Ohm.

Power: 2.25 watt, 100V.

Tolerance: 2%.

Temp coef: 100ppm/Deg C.

Technology: thick film molded.

Number of resistors: 8 isolated (1 circuit).

Package: 16 Dip.

Package of 10

Note: Maybe replaced with equal by BI Technologies.

Burr Brown - INA117AM IC.

The INA117 is a precision unity-gain difference amplifier with very high common-mode input voltage range.

COMMON-MODE INPUT RANGE: ±200V (VS = ±15V)

PROTECTED INPUTS: ±500V Common-Mode ±500V Differential

UNITY GAIN: 0.02% Gain Error max

NONLINEARITY: 0.001% max

CMRR: 86dB min

Package: TO-99-8 Gold Leads.

BI TECH - 1071-0 IC type 16 dip.

Material: ceramic, white.

Double marked: 687 B.

Note: From: Manufactures tube of 25.

Package of 6.

BI TECH - L083C330 Resistor, network.

33 Ohm 2%.

Isolated.

No of resistors: 4.

Case: 8 Sip.

New.

Package of 10