On Sale

LT2-32-2T NEON LAMP

RADIAL LEADS

Requires an external resistor

USAS Designation C6A

DC Breakdown Voltage: 135 V Max. 

Maintenance Voltage 60 -80 volts

Average Life: 25,000 Hours based on AC Operation

Bulb Length  1  1/16"

High Brightness

Vintage New Old Stock - Rare

Learn More

PICO - T-22030 - TF5R21ZZ - Shielded 100 Ohm CT/ 100 Ohm Split, Ultra Miniature Audio Transformer.

Audio Transformers are transformers that are used over the audio frequency range. Audio Transformers are used in a variety of applications. They can provide galvanic isolation, signal gain/loss, match impedances between two interfaces, can be used as a reference and to provide feedback signal. Pico Electronics’ Audio Transformers are manufactured to MIL-PRF-27 Grade 5 Class S. These ultra-miniature transformers are made for durability while maintaining their electrical characteristics. All catalog transformers are manufactured to meet Mil-Std-202, method 107, thermal shock from -55°C to +130°C. All units can be manufactured with a 300 thermal cycle guarantee. Standard as well as custom designs are available. Pico Electronics, Inc. is an approved QPL source.

Specifications:

• MIL-PRF-27: All units manufactured to MIL-PRF-27, Grade 5, Class S.
• FREQUENCY RESPONSE:±3db, 20 Hz - 25 KHz at 1.0 Milliwatt.
• MAXIMUM DISTORTION: 5% With Rated Power Level at 1 KHz and 300 Hz. 10% Distortion at 20 Hz.
• DIELECTRIC STRENGTH: All Units Tested at 200 V RMS.
• INSULATION RESISTANCE: Greater Than 10,000 Megohms at 300 V DC.
• WEIGHT: 28 Grams.
• OPERATING TEMPERATURE: -55º C to +130º C. 
• TERMINALS: Solid .020 Diameter Conductor. Solderability per MIL-STD-202 Method 208.
• THERMAL SHOCK: 25 Cycles, Method 107, MIL-STD-202, Test Condition -55º C to +130º C.

Shielded 100 Ohm CT/ 100 Ohm Split Winding in Series, Hermetically Sealed - 7 Wire.

Secondary Impedance Ohms Split Winding in Parallel: 25.00 Ohms.

Frequency response: 3

Power Watt 1 KHzand higher: 3.000

Power Watt 300 Hz and higher: 2.000

Power Watt 20 hZ and higher: 0.006

Primary Unbalanced DC Current mA: 10.00

Primary DC Resistance  Ohm: 8.00

Secondary DC Resistance Ohm Series Conn: 10.00

Secondary DC Resistance Ohm Parallel Conn: 2.50

Turns Ratio pri/Sec Sec Seri Conn: 1.01

Turns Ratio Pri/Sec Parallel Conn: 2.01

NSN: 5950-01-240-4210

Alternates: W-26095, R-20045, Y-27310, W-26085, Y-27505, S-21440

Package: 0.75" D x 0.82" high.

Additional Data: https://www.picoelectronics.com/

 

Learn More

Motorola - MC68000P10 IC, Microprocessor.

16-/32 Bit data and address registers

16-Mbyte direct addressing range

Memory-mapped input/output (I/O)

14 addressing modes, 10MHz.

Case 64 Dip. Note: Perfect socket pulls.

Genuine Vintage Motorola Microprocessor

Used/Removed from equipment.

Learn More

Mill-Max - 110-43-964-41-001000 Connector, IC socket.

64 DIP. Through Hole

Machined Pins, Gold contacts.

Contact Resistance: 10 milliOhm

Temperature: -55C to 125 C

Dimensions: 25.3 X 81.28 mm

 

Learn More

MAXCONN Mill-Max - 5-418-2 – PLCC IC Sockets, Thru-Hole 0.100”, 84 Position Gold. Plastic leaded chip carriers (PLCC) sockets are a type of chip carrier used to form connections between integrated circuits (ICs) and printed circuit boards (PCBs). Internal standoffs ensure proper positioning of chip carrier in socket Standoffs provide clearance for heat dissipation and cleaning Insulator material is glass reinforced PPS Standard: 0.100" (2,540mm) Pitch Accepts JEDEC PLCCs MS-016 & MS-018 leaded plastic substrates Mounting Type: Through Hole Solder Mount 84 PLCC Leadless Chip Carrier. 84 (4 x 21) Pos PLCC Through Hole Contacts: Gold Inlay. Alternates: 3M 8484-11B1-RK-TP, Mill-Max 940-44-084-24-000000 Note: Due to cost, Mill-Max no longer makes 84 pin sockets with Gold Inlay. Current production is limited to P/N 940-44-084-24-000000 having less expensive Beryllium Copper contact material. New Old Stock Made in USA Learn More

AVERY DENNISON - 08350 Hardware, Cable Ties. 5" (125 mm) beaded.

Secur-A-Tie^® Fasteners are ideal for securing and tamper evidence. Their design permits you to adjust the diameter up to the minimum bundle, but it will not allow it to be loosened or opened without evidence of tampering. 

Tensile strength: 15 lbs. (6.80 kg)

Loop product is a permanent locking fastener that can adjust to a custom fit.

Great for using on bags luggage sunglasses and other items where tagging guns cannot be used

Color: Natural.

Material: Nylon

Package of 40.

Learn More

Alco Electric - DT08 Switch, Rocker.

8 Position.

Actuator: Raised rocker. Top activated.

Mount: PCB.

Package: 16 Dip.

Vintage New Old Stock,  Starting to tarnish.

Learn More

SPC Tech - AERONAUTICAL ELECTRIC CO - SPC21726 Lampholder Flush Mount for T3-1/4 E9 Miniature Bayonet Base lamps.

Miniature Lampholder is commonly used in panel backlighting such as in pinball or slot machines. It can also be combined with a lens assembly for use as an indicator light in applications such as transformer lockout switches or guitar amplifiers.

Such as #44, 131, 757, 1819, 1847.

Mounting Type: Two Holes 40mm Spacing.

Terminal Type: Solder Lugs Insulated from the Mounting Bracket/Post.

Voltage Rating: 28Vmax.

Shell Material: Zinc.

RoHS Compliant

Alternate: Newark 16M1217

Similar: SPC21772, SPC21725, SPC21748, SON LMP-79-4318

Learn More

Advanced Micro Devices - AM2732A-4DC IC, EPROM.

4096 x 8 Bit.

Programming Voltage: 12.5V.

Single supply: 5V.

Package: 24 CDIP

 

Ultraviolet erasable ROM.

Note: Used Socket pulls.

Learn More

Centralab - D300K29S2LNAAAL Capacitor, ceramic.

30pF 1KV. Tolerance: 10%.

Package: radial disc.

Lead spacing: 0.25".

Note: DD300.

High voltage.

Package of 10.

Learn More

623K Telephone Jack, 6P6C RJ11 Female.

6 conductor with 1" leads.

Package of 2.

Learn More

TDK EPCOS - Ferroxcube - P1408 Ferrite Core

The pot core is another type of inductor in which the coil winding resides inside the ferromagnetic core. In pot core, the ferromagnetic core is in the form of two halves. The coil is wound and wrapped by one of the halves. The two halves have holes between them, from which the coil wire is taken out.

168UH Pot Core Type

30 AWG Wire

Core is 1/2" dia X 5/16" high.

Double marked H5A.  

Two cores bond (Glued) together with 168 uH winding on bobbin.

Learn More

TELEDYNE - JAN2N918 Transistor, NPN Silicon switching.

Max voltage: 15Vceo, 30Vcbo.

Max current: 50mAdc.

Dissipation: 200mW.

Package: TO-72-3, Long Gold Leads.

Operating Temperature: -65 DegC to +200 DegC.

House numbered A1616.

Teledyne/Amelco.

 

Learn More

ROBINSON - NUGENT - ICT-083-STG Connector, IC Socket.

8 Dip.

Machined Pins

Gold Contacts.

Row-toRow Spacing 7.62 mm (0.3") 

TE Internal # 1437539-5

TE Internal Description: 808-AG11D-ES=SOCKET ASSY

Learn More

Panasonic Matsushita - 2SB714  - B714 - Transistor, PNP.

Max voltage: 10VEBO, 20VCBO.

Max current: 2Amp.

Dissipation: 6 Watt.

Package: TO-39, Leads cut to 1/8".

Operating temperature: 85 Deg C.

Vintage Original Matushita B714 Germanium Transistor (Japan).

Removed from new equipment. Cross NTE176.

Learn More

Murata JFD - DV11P25B Capacitor, Ceramic. 7-25pF.

Package: Right angle, PCB mount.

Dimensions: 0.375" D x 0.275" Deep.

Voltage: 350 VDC

Temperature: -55C to 125 C

Operating Temp: N300 Temp Coefficient.

NSN: 5910-01-159-2640

Learn More

IND ENERCY - 080103-1  Switch, slide.

Widely used on many small power electronic projects, including power or other controls. 

Contacts: DPDT.

Contact Ratings: 3Amp AC/DC 125VDC.

Connection: PC Pins.

Mech: PCB, Right Angle.

Panel hole: 1.005" long x 0.406" wide (0.866" wide including actuator), x 0.356" above board.

Has 2 mount holes at 0.806" centers.

Learn More

Vishay - DALE - IHD3-10 Inductor, Coil, 10uH.

Status : Discontinued

Inductor Type: High Frequency

Series: IHD

Inductance:10µH

Temperature: -55 C to 125 C

Package/Case: Axial Leaded

Core Material: Ferrite 

Maximum Current: 4A.

Tolerance: 15%.

DC Resistance: 0.016 Ohm max.

Dimensions: 0.900"L x 0.460"D (22.86 X 11.68 mm) plus axial leads 1.3"L.

Learn More

TE connectivity - Augat - Connectors, IC sockets.

16 Dip solder tail, low profile.

Contacts Material: Nickel & Silver, Contact surfacr treatmentis Gold.

Package of 10.

Learn More

ANZEN DENGU CO. LTD - V086  Fuse, Thermal Cutt-off.

Voltage: 250VAC 2Amp / 50VDC 4Amp.

Rated functioning temperature: 174-181F,  81+/-2 deg C and below.

Temperature cutoff: 86C / 187F.

TM: Max temp at which no reconduction will be caused for ten minutes: 95C.

Dimensions: <3mm D x 9mm long with 2 long leads, 68mm wire leads.

Trademark: TAM UL CSA VDE BEAB.

Package of 10.

Applications: Electric home appliances, electric industrial equipments, office automation equipments, plain paper copiers, transformers, motors, etc.

Learn More

AIRPAX - Sensata Technologies - PR15-51.100A-XX Circuit breaker.

SNAPAK® series is a snap-acting hydraulic magnetic circuit protector, Push to reset.

1P 0.1Amp 50VDC.

Trip amp: 1.35A.

Mount: panel, bushing.

Contacts (2) 1/4" QC terminals.

Note: Snapak. Magnetic. With Aux switch 3Amp 120VAC/1.5Amp 32VDC. 3 solder terminals.

 

Learn More

1KV-2.5A Diode. 1,000V 2.5Amp.

Package: axial leads.

Note: Actually marked 1KV2.5A.

Package of 10.

Alternate P/N: RL257 & FR257

Learn More

TAMURA - 416A2226 Power Supply. AC Adapter.

Use with Audio, Video, Computer & Telephone.

Status: Discontinued

Output: 6VDC 600mA.

Input: 120VAC 60Hz 8 Watt.

Wall-mount with attached 6 foot cord and barrel connector 5.5mm OD/2.0mm ID.

Polarity: Center Negative.

Class 2. Listed: UL/CSA.

New Old Stock - Bulk purchased from the Manufacturer

Learn More

CW IND Switch, slide.

Contacts: DP3T ( 3 Position).

Contact Ratings: 3Amp AC, 0.5Amp DC, 125VAC.

Connection: 8 PC Pins.

Mech: Panel, or PCB, Right Angle (Actuator).

Body: 1.174" long x 0.406" wide (Plus Actuator), x 0.363" high.

Four (4) mount pins at approximately 1.149" centers.

Note: Each Adjacent Contact shares its common.

Vintage New Old Stock - Tarnished Terminals

Made in USA 

Learn More