On Sale

Square D - H363 - Heavy Duty Safety Switch. 3P 100Amp 600VAC.

Square D Safety Switch, Heavy Duty Fusible

600 VAC/VDC, 100 A, 30 hp, 50 hp, 3 ph, 3 Pole, 3 Wires

10/200 kA Short Circuit Current

TPST, Handle Actuator,

NEMA 1, Surface Mount, Lug Terminal

Dimensions: 10.5 in W x 6.38 in D x 21.25 in H, Steel.

New

Learn More

Square D - 8502SAO11V02 - Magnetic Contactor.

NEMA Contactor, Type S

Nonreversing

Size 00

9A, 1 HP at 230 VAC, 1 phase, up to 100 kA

2 pole, 120VAC-60Hz / 110VAC-50Hz coil

Made in the USA.

New

Learn More

Square D - 5NR-601 - Transformer, Current.

Ratio 600:5, 50-400Hz.

Dimensions: 1 -9/16 ID, 3-1/2" OD.

Weight: 1.09 lb.

Used/Removed from equipment.

Learn More

LUCIDYNE - 1022A - AUTOMATIC VOLTAGE CONTROL BOARDS

900619-101 PC BD 900619

Rwmote Front Panel

Note: Lucidyne acquird by Microtec

Learn More

Eaton Cooper/Bussmann - EM258503V - Connector, Wire to Board Terminal Block.

Circuit Count: 3 Position.

Contact Ampacity: 16Amp.

Insulation Voltage: 300V.

Mounting Type: PCB, Right Angle (RA) Wire Entry.

Horizontal with Board.

Accepts Wire Size: 12-26AWG.

Euro-Mag.

Features: interlocking (side).

Alternate: TE Connectivity 282836-3

Learn More

SGS 2N6058 Power Bipolar Transistor

Collector Base Voltage (VCBO): 80 V

Collector Emitter Voltage (VCEO): 80 V

Emitter Base Voltage (VEBO): 5 V

Max Collector Current: 12 A

TO-3

Learn More

Motorola 2N6058 Power Bipolar Transistor

Collector Base Voltage (VCBO): 80 V

Collector Emitter Voltage (VCEO): 80 V

Emitter Base Voltage (VEBO): 5 V

Max Collector Current: 12 A

TO-3

Learn More

Unidentified MFG - SX1793415684 - LCD, Liquid Crystal Display.

Package: 50 Pin Dip.

Dimensions: 93.8mm Long x 38.0mm Wide x 3.0mm High.

New Old Stock

Learn More

TEC - Transistor Electronics Corp - STBL-8574A-3 - Switch, Pushbutton.

Contacts: NO. (Normally Open)

Actuator: Illuminated, Momentary.

Connection: 7 Gold Turret Posts.

Mech: Single Hole Mount/Bushing.

Body: 0.55" D x 0.801" long.

Note: Amber Lens.

Red lamp.

Lens cap 0.309" D x 0.356" long.

Threaded Bushing Length:0.247".

Note: Transistor Electronics Corp (TEC) is now Data Panel. 

Made in USA - New Old Stock - Rare

Learn More

THOMSON - 5AR115JBBCA.2 Capacitor, Disc.

A NPO ceramic capcitor is an ultrastable or temperature compensating capacitor. It is one of the most highly stable capacitors. It has very predictable temperature coefficients (TCs) and, in general, does not age with time.

Capacitance: 15pF

Voltage: 1KV.

Tolerance: 5%. NP0.

Package: Radial Leads.

Package of 20.

Series 136.41.2.

Alternate: NTE 90015-100, Vishay 561R10TCCQ15, NIC NCD150J1KVNPOF, Mallory Sonalert GP415

 

Learn More

THOMSON - 5AR112JBBCA.3 - Capacitor, Disc.

A NPO ceramic capcitor is an ultrastable or temperature compensating capacitor. It is one of the most highly stable capacitors. It has very predictable temperature coefficients (TCs) and, in general, does not age with time.

Capacitance: 12pF

Voltage: 1KV.

Tolerance: 5%. NP0.

Package: radial leads.

Package of 20.

Series 154.38.2.

Learn More

Motorola - 2N6051 - Transistor, PNP.

Max voltage: 80V.

Max current: 12Amp.

Dissipation: 150 watt.

Package: TO-3 steel.

Note: Silicon Darlington.

Genuine Motorola - New Old Stock

Alternates: ECG248, NTE248, SK3949

Learn More

WARD LEONARD - RWO20S5000 - 20S5000 - Resistor, Ceramic.

Stripohm resistors utilize a flat, oval-shaped, ceramic base on which the resistive conductor is wound, they are practically identical in construction with Vitrohm tubular resistors. The core or base has a smooth surface with no sharp edges. This design precaution is taken to guard against wire breakage during manufacture. The fact that the core is slightly elliptical shape that increases the radiating surface slightly and provides a core considerably stronger than an ordinary flat rectangular base, and insures that the wire lies flat against the entire winding surface. Stripohm resistors are equipped with metal strip (spring clip type) mounting brackets. Stripohm resistor can be chassis mounted or stacked.

Resistance: 5000 Ohm. (5K) 

Power: 20 Watt.

Technology: Wirewound, Stripohm.

Terminals: Solder Lugs

Viteous Enamel Coated.

Dimensions: Overall 2.632" Long x 0.868" Wide, including contacts x 0.343" High.

New Old Stock

Additional Information: https://worldradiohistory.com/BOOKSHELF-ARH/Handbooks/Ward-Leonard-Electric-Handbook-Of-Power-Resistors-1959.pdf

 

Learn More

WARD LEONARD - RWO20S50 - 20S50 - Resistor, Ceramic.

Stripohm resistors utilize a flat, oval-shaped, ceramic base on which the resistive conductor is wound, they are practically identical in construction with Vitrohm tubular resistors. The core or base has a smooth surface with no sharp edges. This design precaution is taken to guard against wire breakage during manufacture. The fact that the core is slightly elliptical shape that increases the radiating surface slightly and provides a core considerably stronger than an ordinary flat rectangular base, and insures that the wire lies flat against the entire winding surface. Stripohm resistors are equipped with metal strip (spring clip type) mounting brackets. Stripohm resistor can be chassis mounted or stacked.

Resistance: 50 Ohm.

Power: 20 Watt.

Technology: Wirewound, Stripohm.

Terminals: Solder Lugs

Viteous Enamel Coated.

Dimensions: Overall 2.632" Long x 0.868" Wide, including contacts x 0.343" High.

New Old Stock

Additional Information: https://worldradiohistory.com/BOOKSHELF-ARH/Handbooks/Ward-Leonard-Electric-Handbook-Of-Power-Resistors-1959.pdf

 

Learn More

WARD LEONARD - RWO20S1500 - 20S1500 - Resistor, Ceramic.

Stripohm resistors utilize a flat, oval-shaped, ceramic base on which the resistive conductor is wound, they are practically identical in construction with Vitrohm tubular resistors. The core or base has a smooth surface with no sharp edges. This design precaution is taken to guard against wire breakage during manufacture. The fact that the core is slightly elliptical shape that increases the radiating surface slightly and provides a core considerably stronger than an ordinary flat rectangular base, and insures that the wire lies flat against the entire winding surface. Stripohm resistors are equipped with metal strip (spring clip type) mounting brackets. Stripohm resistor can be chassis mounted or stacked.

Resistance: 1500 Ohm.

Power: 20 Watt.

Technology: Wirewound, Stripohm.

Terminals: Solder Lugs

Viteous Enamel Coated.

Dimensions: Overall 2.632" Long x 0.868" Wide, including contacts x 0.343" High.

New Old Stock

Additional Information: https://worldradiohistory.com/BOOKSHELF-ARH/Handbooks/Ward-Leonard-Electric-Handbook-Of-Power-Resistors-1959.pdf

 

Learn More

WARD LEONARD - RWO20S9.3 - 20S9.3 - Resistor, Ceramic.

Stripohm resistors utilize a flat, oval-shaped, ceramic base on which the resistive conductor is wound, they are practically identical in construction with Vitrohm tubular resistors. The core or base has a smooth surface with no sharp edges. This design precaution is taken to guard against wire breakage during manufacture. The fact that the core is slightly elliptical shape that increases the radiating surface slightly and provides a core considerably stronger than an ordinary flat rectangular base, and insures that the wire lies flat against the entire winding surface. Stripohm resistors are equipped with metal strip (spring clip type) mounting brackets. Stripohm resistor can be chassis mounted or stacked.

Resistance: 9.3 Ohm.

Power: 20 watt.

Technology: Wirewound, Stripohm.

Terminals: Solder Lugs

Viteous Enamel coated.

Dimensions: Overall 2.632" Long x 0.868" Wide, including contacts x 0.343" High.

New Old Stock

Additional Information: https://worldradiohistory.com/BOOKSHELF-ARH/Handbooks/Ward-Leonard-Electric-Handbook-Of-Power-Resistors-1959.pdf

 

Learn More

WARD LEONARD - RWO20S360 - 20S820 - Resistor, Ceramic.

Stripohm resistors utilize a flat, oval-shaped, ceramic base on which the resistive conductor is wound, they are practically identical in construction with Vitrohm tubular resistors. The core or base has a smooth surface with no sharp edges. This design precaution is taken to guard against wire breakage during manufacture. The fact that the core is slightly elliptical shape that increases the radiating surface slightly and provides a core considerably stronger than an ordinary flat rectangular base, and insures that the wire lies flat against the entire winding surface. Stripohm resistors are equipped with metal strip (spring clip type) mounting brackets. Stripohm resistor can be chassis mounted or stacked.

Resistance: 820 Ohm.

Power: 20 watt.

Technology: Wirewound, Stripohm.

Terminals: Solder Lugs

Viteous Enamel coated.

Dimensions: Overall 2.632" Long x 0.868" Wide, including contacts x 0.343" High.

New Old Stock

Additional Information: https://worldradiohistory.com/BOOKSHELF-ARH/Handbooks/Ward-Leonard-Electric-Handbook-Of-Power-Resistors-1959.pdf

 

Learn More

WARD LEONARD - RWO20S360 - 20S360 - Resistor, Ceramic.

Stripohm resistors utilize a flat, oval-shaped, ceramic base on which the resistive conductor is wound, they are practically identical in construction with Vitrohm tubular resistors. The core or base has a smooth surface with no sharp edges. This design precaution is taken to guard against wire breakage during manufacture. The fact that the core is slightly elliptical shape that increases the radiating surface slightly and provides a core considerably stronger than an ordinary flat rectangular base, and insures that the wire lies flat against the entire winding surface. Stripohm resistors are equipped with metal strip (spring clip type) mounting brackets. Stripohm resistor can be chassis mounted or stacked.

Resistance: 360 Ohm.

Power: 20 watt.

Technology: Wirewound, Stripohm.

Terminals: Solder Lugs

Viteous Enamel coated.

Dimensions: Overall 2.632" Long x 0.868" Wide, including contacts x 0.343" High.

New Old Stock

Additional Information: https://worldradiohistory.com/BOOKSHELF-ARH/Handbooks/Ward-Leonard-Electric-Handbook-Of-Power-Resistors-1959.pdf

 

Learn More

WARD LEONARD - RWO20S25 - 20S25 - Resistor, Ceramic.

Stripohm resistors utilize a flat, oval-shaped, ceramic base on which the resistive conductor is wound, they are practically identical in construction with Vitrohm tubular resistors. The core or base has a smooth surface with no sharp edges. This design precaution is taken to guard against wire breakage during manufacture. The fact that the core is slightly elliptical shape that increases the radiating surface slightly and provides a core considerably stronger than an ordinary flat rectangular base, and insures that the wire lies flat against the entire winding surface. Stripohm resistors are equipped with metal strip (spring clip type) mounting brackets. Stripohm resistor can be chassis mounted or stacked.

Resistance: 25 Ohm.

Power: 20 watt.

Technology: Wirewound, Stripohm.

Terminals: Solder Lugs

Viteous Enamel coated.

Dimensions: Overall 2.632" Long x 0.868" Wide, including contacts x 0.343" High.

New Old Stock

Additional Information: https://worldradiohistory.com/BOOKSHELF-ARH/Handbooks/Ward-Leonard-Electric-Handbook-Of-Power-Resistors-1959.pdf

 

Learn More

WARD LEONARD - RWO20S200 - 20S200 - Resistor, Ceramic.

Stripohm resistors utilize a flat, oval-shaped, ceramic base on which the resistive conductor is wound, they are practically identical in construction with Vitrohm tubular resistors. The core or base has a smooth surface with no sharp edges. This design precaution is taken to guard against wire breakage during manufacture. The fact that the core is slightly elliptical shape that increases the radiating surface slightly and provides a core considerably stronger than an ordinary flat rectangular base, and insures that the wire lies flat against the entire winding surface. Stripohm resistors are equipped with metal strip (spring clip type) mounting brackets. Stripohm resistor can be chassis mounted or stacked.

Resistance: 200 Ohm.

Power: 20 watt.

Technology: Wirewound, Stripohm.

Terminals: Solder Lugs

Viteous Enamel coated.

Dimensions: Overall 2.632" Long x 0.868" Wide, including contacts x 0.343" High.

New Old Stock

Additional Information: https://worldradiohistory.com/BOOKSHELF-ARH/Handbooks/Ward-Leonard-Electric-Handbook-Of-Power-Resistors-1959.pdf

Learn More

PT-559 - Solder Terminal, Thread Mount Double Turrett Post, Non-Insulated, Silver.

Turreted Terminal made of Bass with Silver Plated Finish.

Threaded Approximately 9mm below PCB and 10mm above board (See Attached Print).

Mounting Type: Panel, Chasis or PCB

0.25" (6.35mm) Hex in the Center.

Overall Length: 0.854" Long. (21.6mm)

Thermination: Threaded 6-32

Base Material: Brass, Silver Plated.

Alternate: Cambion 160-1582-02-01-00

New Old Stock - Rare

Applications: Industrial, PCB Breadboarding, Wire Wrap, Development, Grounding.

Made in USA

.

Learn More

Ferrite Toroid Core 5/8" x 1/4" Learn More

GP Fast Recovery Rectifier Hockey Puck. V(RRM)(V) Rep.Pk.Rev. Voltage=1.2k, I(RM) Max.(A) Pk. Rev. Current=30m, @Temp. (?C) (Test Condition)=125, V(FM) Max.(V) Forward Voltage=1.5, @I(FM) (A) (Test Condition)=320, I(O) Max.(A) Output Current=100, t(rr) Max.(s) Rev.Rec. Time=2.0u, @I(F) (A) (Test Condition)=100 Silicon TO-200AA Learn More

Texas Instruments - SN75176BP IC. Differential Bus Transceivers. 

Receiver Hysteresis: 50mV          

Voltage – Supply: 4.75V ~ 5.25V

Operating Temperature: 0°C ~ 70°C         

Package / Case:8-DIP (0.300", 7.62mm)

Supplier Device Package: 8-PDIP

Learn More