On Sale

Amphenol RF -  112424 - Connector, BNC. RF / Coaxial Bulkhead Receptacle Jack

Angle: Straight

Cable Type: RG174,  RG188, RG316

Contact Material: Phosphor Bronze

Contact Plating: Gold

Dielectric Material: Delrin

Frequency: 4GHz

Gender: Jack

Housing Color: Silver

Housing Finish: Nickel

Housing Material: Brass

Impedance: 50 Ohms

Mating Type: Bayonet

Mounting Type: Bulkhead

Primary Type: BNC

Special Features: Extended Insulation

Termination: Solder Cup

Voltage Rating: 500 V

Each indiv pkg'd with hardware.

Alternate / Equivalent: TE Connectivity / Raychem DK-621-0434-1S

Learn More

Motorola - 2N6342 - Triac.

Max voltage: 200V.

Max current: 8 Amp.

Dissipation: Pgav 0.5 watt. PGM 20 watt.

Package: TO-220. 

Operating temperature: -40 to 125 Deg C.

Note: Silicon bidirectional triode thyristor.

Alternate: ECG56004

Learn More

General Electric - V130LCX1462 - MOV, Metal Oxide Varistor.

These MOV’s are designed to be the surge protection device “of last resort” and are put across AC lines of 110-130 volts to stop short-duration surges / voltage spikes from making it to your sensitive electronic devices. These are the 14mm size, and approximate ratings are to withstand surges of 4500 amps 1 time, 2500 amps 2 times, and 1000 amps 10 times, as long as surges are less than 20 microseconds in duration. Parallel multiple MOV’s to increase these energy ratings.

Working Voltage: 130V.

Package: 14mm Disc, Radial Leads.

Alternate: V130LC10C, V130LA10AP, V130LA10CP

Additional Information: https://www.nist.gov/system/files/documents/pml/div684/Superalpha.pdf

Note: Transient Surge Suppressor.

Learn More

DII - S1D-13 - Diode.

Ratings: 1Amp 200V.

Ultra Fast.

Package: DO-214AC SMD.

Package of 10.

Learn More

ST Microelectronics - TDA2005 - IC, Audio.

20 Watt Bridge Amplifier for Car Radios.

Case: Multiwatt-11 Power SIP

Staggered Leads.

Learn More

Square D - FAL34015 - Circuit Breaker.

Status: Discontinued Nov. 2020

FAL Series, Thermal Magbetic Molded Case Circuit Breaker

3Pole 15Amp 480VAC.

Number of Poles: 3

AIC Rating: 18kA@480V

Connection: Feed-Thru

Thermal-Magnetic, Series 2.

Mount: Panel Mount.

Max Wire Gauge: 4 AWG

Dimensions: 9.8" x 6.2" x 6.3"

Approvals: CSA, UL listed

NSN 5925-01-161-3262

Factory New

Learn More

Square D - 8502PE5.10E - Contactor.

Status: Discontinued

3 Pole 3 Phase 8502PE5.00E and 8502PE5.10E.

Current Rating: 12 Amp

1 NO Contact

Approvals: UL, CSA

Factory New

Learn More

Square D - KP13P14V14 - Relay, Power.

Status: Discontinued Januray 2021

Input: AC.

Contacts: 3PDT.

Contact Ratings: 10Amp.

Mounting: Socket

Coil Voltage: 24VAC 50/60Hz (10Amp 120VAC/ 6A 250V/1/3HP 250V/1/6HP 120V).

Mech Mtg: 11 Octal.

Packaging: Enclosed plug in.

Note: Class: 8501.

Series D. Ice Cube

Learn More

Siemens / ITE - ED43B060 - Circuit Breaker. SIEMENS LOW VOLTAGE SENTRON MOLDED CASE CIRCUIT BREAKER WITH THERMAL - MAGNETIC TRIP UNIT. STANDARD 40 DEG C BREAKER ED FRAME WITH STANDARD BREAKING CAPACITY. MEETS UL 489 / IEC 60947-2 STANDARDS. 60A 3-POLE BREAKER (18KAIC AT 480V). SPECIAL FEATURES: LOAD LUGS ONLY (LN1E100) WIRE RANGE: 10 - 1/0AWG (CU/AL). DIMENSIONS (W x H x D) IN: 3 x 6.35 x 3.92. Current: 60 A AC Voltage Rating: 18kA at 480 VAC Number of Poles: 3 Terminal Connection: Load Side Lugs Type: Thermal Magnetic Phase Connection: ABC Frame Size: 125A/ED Min Wire Size: 10 AWG Max. Wire Size: 1/0 AWG New Learn More

Siemens - ED43B060 - Circuit Breaker. Siemens / ITE Molded Case Circuit Breaker Its Compact And Easy to Install ED Series three poles molded case circuit breaker features a thermal magnetic over current protection system it has an interrupting rating of 65 kiloampere at 240 Vac 18 kiloampere at 480 Vac (UL) with a terminal load lug it has a voltage rating of 480 Vac and it has a current rating of 60 amps at an operating temperature of 40 deg c it accommodates copper/aluminum wire of size 10-1/0 AWG siemens circuit breaker is UL and CSA certified. Number of poles: 3P Current Rating: 60 A Voltage Rating: 480VAC. Mounting: Bolt-On Type ED4. Dimensions: 3" wide x 6.35" high x 4.56" deep. Aliases: US2:ED43B060 Sentron. Note: Used/Removed from equipment. Learn More

Motorola - 2N6071A - Triac.

Max voltage: 200V.

Max current: 4 Amp.

Package: TO-225AA gold leads.

Operating temperature: -40 to 110 Deg C. ote: Sensitive gate.

Learn More

Harris Corp - CD74HC4020E - 14-Stage Binary Ripple Counter

Note: Harris products acquired by Texas Instruments.

New 16-dip

Learn More

GENERAL SIGNAL - Bird Slug - 7004 - Wattmeter Element Slug

43db

2-1000MHz.

Adjustable

Model 7004 Sniffer Element for Bird Wattmeter

Standard Element for Bird and Coaxial Dynamics Meters

Plug-in Signal Sniffer.

Used - Excellent Condition - Made in USA

Learn More

CDI - Coaxial Dynamics - 509146-13 - Model 3023 -  Directional Power Coupler, 225-400MHz

60 W Forward

15 W Reverse.

Model 3023.

Coaxial connectors (0.62" diameteron) the ends

Double marked: ITT Industries 509146-13.

Military 5985-004943532.

New Old Stock - Made in USA

Learn More

Bird Electronics - Power Meter Slug - 250-2 - 250-450MHz 2.5 Watt, Low Power Unit.

All Table 2 Series, 7/8" Plug-In Elements are calibrated in accordance with meticulous Bird calibration procedures supported by a long history of mean deviation values to assure adherence to advertised specifications of current instruments, as well as field interchangeability with equipment purchased, used and trusted in all the years since its introduction.

This is a new Bird 250H plug-in element for the Bird 43 wattmeters.  It measures 0 to 250 watts full scale for frequencies from 2 to 30 MHz.  This range covers all Ham bands from 160 to 10 meters as well as the CB band. 

7/8" Plug-In Power Meter Element

Compatible Wattmeters:

3128A, Single Carrier, Wattcher RF Monitor

3170B, Dual Meter-Dual Element, Single Carrier Wattcher RF Monitor

43, General Purpose Wattmeter

43P, General Purpose Wattmeter with Peak Reading Option

4314C, PEP, Single Element, Wattmeter

4431, Variable RF Tap, Wattmeter

4391A, PEP-Dual Element, Power Analyst

4521, Single Meter-Single Element Panel Meter

4522, Single Meter-Dual Element Panel Meter with Selector Switch

4526, Dual Meter - Dual Element Panel Meter

4527, Dual Meter - Dual Elements and Sampler Port (2 to 512 MHz Elements Only)

Made in USA

New

Learn More

ALPS - VR-074 - Potentiometer, slide.

Resistance: 10K Ohm.

Travel: 38.6mm.

Dimensions: 50.1mm long x 12.3mm wide x 12.3mm above board.

Actuator extends 15.6mm above body.

Contacts: solder.

Learn More

IC, Eprom. CMOS 1 Megabit (65 K x 16-Bit), 12.75V. Package: 40 Cdip. Note: Perfect socket pulls. Used/Removed from equipment. Learn More

SDP/SI - A6R6-110012 - Hardware, Timing Belt.

Resistance to dirt, grease, oil, and moisture. Polyurethane has excellent abrasion resistance, so these belts don’t create dust while they runIt has fiberglass tensile cords for strength, durability, and resistance to elongation, and it has a polyurethane tooth facing for quieter operation and resistance to wear.

Pitch: 0.0816" (40D.P.).

Number of Grooves/Teeth: 110.

Width: 1/8" (0.125") 3mm

Material: Polyurethane.

Tension Member: Fiberglass.

Pitch Length: 8.98" (228.092mm).

Single Sided.

Learn More

NICHICON - TLB1H4R7M - Capacitor, Electrolytic.

Capacitance: 4.7uF

Voltage: 50V.

Package: Axial Leads.

Dimensions: 5.1mm x 13.1mm long.

Note: operating temperature: 85 Deg C.

NSN 591-01-211-6652

Alternate: Illinois Capacitor 475BPA050M, Nichicon TVX1H4R7MAD

Package of 5.

Learn More

GENERAL ELECTRIC - 3157 - Lamps & Lights.

This GE product has a S8 shape with a plastic wedge. The maximum overall length of this bulb is 2.09 inches and bulb diameter is 1 inch. This lamp has basic applications such as Rear lights, Back up lights, Sidemarkers, Front lights, Turn Signals. The rated life of this lamp is 1200/5000 hours depending on usage of the lamp or car.

Automotive Replacement Lamps.

Long life.

Snap-in.

Clear.

Genuine General electric - New Old Stock

Note: Miniature incandescent.

Learn More

Cutler-Hammer Eaton - 8811K18 -  Switch, Toggle.

Contacts: SPST. None/Off/On

Contact Ratings: 115VAC 10Amp. 28VDC

Contact Plating: Silver

Actuator: Off - ON(Mom).

Connection: screw terminals #6-32.

Mech: Panel, Bushing 15/32" thread.

Body: 1.140" long x 0.635" wide x 1.014" deep including terminals.

Note: Threaded bushing length: 0.480".

Actuator length: 0.675".

Double marked MS35058-28.

Complete with hardware.

Learn More

Cutler-Hammer Eaton - 7566K83/84 Switch, Toggle.

Contacts: SPST-NO.

Contact Ratings: 15Amp@125VAC, 10Amp@250VAC.

Actuator: Momentary.

Connection: Screw Terminals.

Mech: Panel. Body: 1.328" long x 0.750" wide x 1.014" deep including terminals.

Note: Threaded Bushing Length: 0.457".

Actuator Length: 0.324".

No knob.

Learn More

Cutler-Hammer Eaton - 7506K4 - Switch, Toggle.

The 7500 series general purpose Toggle Switch offers the widest selection of features and the design flexibility to meet a variety of applications. It is available in solder lugs, screw, 0.25-inch spade terminals.

Contacts: SPST.

Contact Ratings: 10Amp 250VAC.

Actuator: On-None-On (Mom).

Connection: Screw.

Mech: Panel.

Panel hole: 1.134" long x 0.637" wide x 0.684" high.

Standard 15/32" threaded bushing x 0.519" long (seated).

Actuator: 0.565" long.

Note: Complete with hardware.

Learn More

Cutler-Hammer Eaton - 1555A-6507 Series A2 Fiber-Optic Sensor

Eaton Cutler-Hammer 55 Series Photoelectric Sensors are identical to Eaton Cutler-Hammer's 50 Series except without the interchangeable outputs or logic functions. They offer durability and high optical performance in a cost effective, self-contained package. The 55 Series features sensors with AC and DC operation in a single unit. A relay option is available on these models that provides a 3 Amp SPDT relay output for high current switching.

Eaton Cutler Hammer, 1555A-6507, Eaton 55 Series Photoelectric Sensor, Photoelectric, Sensor distance depends on the fiberoptic cables used, 50 mA max DC, NPN and PNP Open Collector, 50 mA at 30 Vdc, 4 Pin Mini Connector, 10-30 Vdc input, Auto reset short circuit

Features:

• High optical performance includes 100-foot (30.5m) thru-beam range and 6-foot (1.8m) diffuse reflective range
• Both AC and DC operation in a single unit
• Short circuit protected solid-state outputs on AC/DC and DC-only versions (except thru-beam)
• Relay output option provides 3 Amp current switching on AC/DC models
• Thru-beam models feature an infrared sensing beam along with a visible red LED behind the lens in the source unit to aid in sensor alignment
• Fiber optic sensors operate in thru-beam or diffuse reflective mode depending on the fiber optic cable selected
• Glass fiber optic cables plug into NEMA 4 rated sockets on the front of the sensor. Sockets are leakproof even when the fiber optic cables are not plugged in
• Fully potted construction for use in areas subject to washdown, high shock and/or vibration
• Choice of pre-wired power cable or built-in mini-connector versions. Standard pre-wired cable length is 6 feet (1.8m)
• Built-in, patented, 360 degrees rotation 10 degrees tilt ball-swivel base

SELF-CONTAINED,BARE BONES, 30VDC,CONN,W/FIBEROPTIC ADA

10-30VDC / Con.

 

Learn More