Lamp

MAJOR - NE-2 with Resistor Lamps, Neon.

A neon lamp (also neon glow lamp) is a miniature gas discharge lamp. The lamp typically consists of a small glass capsule that contains a mixture of neon and other gases at a low pressure and two electrodes (an anode and a cathode). When sufficient voltage is applied and sufficient current is supplied between the electrodes, the lamp produces an orange glow discharge. The glowing portion in the lamp is a thin region near the cathode; the larger and much longer neon signs are also glow discharges, but they use the positive column which is not present in the ordinary neon lamp. Neon glow lamps were widely used as indicator lamps in the displays of electronic instruments and appliances. They are still sometimes used for their electrical simplicity in high-voltage circuits.

Glow Lamps, 2 Electrodes that Glow Orange when 115VAC is applied.

Has a 30K ohm resistor in series with one lead and both wire leads are insulated with tubing.

Case: 0.24" D x 0.64" long, glass envelope with wire leads, 2" + 3.5" wire leads.

Shape: T2

Power: 0.25 W

Voltage: 105 to 125 V

Life: > 25,000 Hours

Proudly Made in USA

 

Learn More

Triad/Magnetek - 1030-32-500K - Mercury Ballast Kit.

Universal Mercury and Metal Halide High Intensity Discharge Lamp Ballast Replacement Kit for 250Watt H-37 Lamp.

Autotransformer Mercury Ballast and 22.5uF 280VAC Oil Capacitor, with brackets & instruction sheet.

480VAC 60Hz

Alternates: 47500 H250/480-KIT, 71A3542, 71A3542-001D

Learn More

SOLICO - 8-702 - Lamps & Lights.

Panel Indicator. 110VAC.

Color: Red.

Body Material: Nylon

Lens Material: Polycarbonate

Legend Reads: "SOLD OUT".

Mount: Snap-in.

2 Wire.

Snap fits into .375" x 1.28" Panel Cutout

Mount Flange is 1.38" long x 0.46" Wide.

New Old Stock.

Learn More

RODAN - RF5L-GF. Neon Panel Indicator Bulb

Neon lighting consists of brightly glowing, electrified glass tubes or bulbs that contain rarefied neon or other gases. Neon lights are a type of cold cathode gas-discharge light. A neon tube is a sealed glass tube with a metal electrode at each end, filled with one of a number of gases at low pressure. Small neon lamps are most widely used as visual indicators in electronic equipment and appliances, due to their low power consumption, long life, and ability to operate on mains power.

Neon 110VAC - Extra Long Life  - Rugged- Low Current, Cool running Neon Bulbs

Not affected by vibration, mechanical shock, or frequent On/Off operation

Extra Long Solderable Leads

Package: Frosted Diffuser Glass Envelope with Pig Tails.

Illumination: Green, Krypton gas gives green light (Lookout Superman).

Bulb Life: Greater than 50,000 hours

Approximate Body Dimensions: 0.19" Diameter X 0.635 Length with 1.20" Leads

Note: Use 82 K Ohm resistor for 110 VAC - Bulb will be damaged if used without a resistor.

Made in Japan Quality

Rare Vintage Rodan - New Old Stock 

Learn More

Chicago Miniature Lab - A2A - Lamps & Lights.

Neon, operates at 65-70VAC or 115VAC with a 100K Ohm resistor (not included).

Package: Glass tube, Radial leads.

Alternate: NE-2

Learn More

Lamps and lights. Neon lamp with radial leads which requires a 1/2 watt 100K resistor in series for 115VAC. Unit has teflon opaque sleeves covering the 1-1/8" long wires. Bulb size: 1/4" D x 1/2". Package of 10. Learn More

Calrad - 90-793 - Lamps & Lights.

Panel indicator, Neon Pilot Assembly.

For operation on 110VAC, requires 100K resistors in series.

When used with 220V. Use 250K resistors in series.

AC starting voltage 60V.

Note: Amber.

Round lens is slightly recessed in housing.

Alt P/N P.L.3.

Package of 2.

Made in Japan

Learn More

Calrad - 70-792 - Lamps & Lights.

Panel Indicator, Neon Pilot Assembly.

For operation on 110VAC, requires 100K resistors in series.

When used with 220V use 250K resistors in series.

AC starting voltage 60V.

Note: White. Round lens is slightly recessed in housing.

Alt P/N P.L.3.

Package of 2

Made in Japan

Learn More

Calrad - 90-791 - Lamps & Lights.

Panel indicator, Neon Pilot Assembly.

For operation on 110VAC requires 100K resistors in series.

When used with 220V use 250K resistors in series.

AC starting voltage 60V.

Note: Green. Round lens is slightly recessed in housing. 

Alternate: P.L.3.

Package of 2.

Made in Japan

Learn More

Calrad - 90-790 - Lamps & Lights.

Panel indicator, Neon Pilot Assembly.

For operation on 110VAC, requires 100K resistors in series.

When used with 220V use 250K resistors in series.

AC starting voltage 60V.

Note: Red. Round lens is slightly recessed in housing.

Alternate: P.L.3.

Package of 2.

Made in Japan

Learn More