Lamp

LEDTRONICS - F206CR6-0026 - F206CR6-24V/20-P Led, lamp.

24V, 45mcd, 635nm, 12-14mA.

FSN/NSN Qualified Based LED.

Package: T1-3/4 (5mm) midget flange based.

Color: Red.

Direct incandescent replacement for 327, 387.

Learn More

Lamps & Lights. Panel indicator 24VDC. Lens: yellow. Complete with attached 5-1/2" wire leads. Nylon housing and integral convex lens. Panel: snap-in. Dimensions: behind panel 8.00mm D x 1.61". Learn More

INTER-MARKET INC. - NE-1P - Lamps & Lights. Neon, Miniature Bulb. The INTER-MARKET INC. NE-1P is a miniature neon indicator lamp designed for use in electronic equipment and appliances. It functions as a gas-discharge lamp where a glass envelope is filled with neon gas (often mixed with argon) that glows when sufficient voltage is applied between its electrodes. Key Specifications & Features • Lamp Type: Miniature Neon Bulb. • Package Style: Radial Leads (wire terminals). • Common Use: Primarily used as a status or power indicator in line-voltage circuits. • Durability: Highly rugged and resistant to mechanical shock, vibration, and frequent on/off cycles. • Operating Temperature: Can operate in a wide range from -40°C to +150°C General Operating Characteristics While specific electrical ratings can vary by exact sub-model, typical neon lamps of this class share these traits: • Breakdown (Strike) Voltage: Usually requires 65–90V AC or 90–135V DC to initiate the glow. • Maintaining Voltage: Once lit, the voltage across the lamp typically drops by about 10–20V. • Current: Operates at very low current, typically between 0.5 mA and 3.0 mA. • Mandatory Resistor: A series current-limiting resistor is required for safe operation; without it, the lamp may shatter or damage the circuit. Recommended Resistor Values The exact resistance depends on your supply voltage and how bright you want the lamp to be: • For 120V AC (Standard US Mains): o Standard Brightness: Use a 100kΩ (100,000 ohm) resistor. o Extended Life/Dimmer: Use a 150kΩ or 220kΩ resistor. • For 220V–240V AC (EU/International Mains): o Standard Brightness: Use a 220kΩ to 330kΩ resistor. Power Rating (Wattage) • A standard 1/4 watt (0.25W) resistor is sufficient for both 120V and 240V applications, as the power dissipated by the resistor at these current levels is typically less than 0.1W. Installation Tips • Series Connection: Connect the resistor to either lead of the neon bulb. It must be in series with the lamp, not in parallel. • Insulation: Since you are likely working with mains voltage, ensure the resistor and all exposed connections are covered with heat shrink tubing to prevent electrical shock. • DC Operation: If using DC, only one electrode will glow. You may need to slightly lower the resistance value compared to AC to achieve the same brightness. Type: Vintage Neon, Miniature. Package: Radial Leads. Vintage - New Old Stock Learn More

Lamps & Lights. 6.3V 200mA. Base: Midget flange. Learn More

Industrial Devices - 1050E87 - Neon Panel Indicator, Pilot Light, 125V. 1/2Watt Neon lamps are very rugged and not affected by vibration, mechanical shock, or frequent ON/OFF operation. Neon lamps may be operated over a wide temperature range from -40 to +150 degrees C, and are not damaged by voltage transients of high voltage static discharges. Lamps, Lights, Indicators, Pilot Light. Industrial / Commercial Quality Style: Designator: Round Frame, Round Lens Type Neon Panel Indicator. Voltage: 125 VAC (Operating 105- 125VAC) Power: Energy Efficient 1/2 Watt Mount: Single Hole Snap-in Flange Mount. Dimensions: 12.5mm D x 22mm behind board. Mounting Hole Diameter: 0.5” (12.7mm) Recommended Panel Thickness: 0.30” to 0.090” Connections: 14" Long Wire Leads. (Note: Most others are only 6”) Lamp Color: Red Lens Shape: Flat Lens Material: Polycarbonate Lens Transparency: Diffused Bezel: Polished Stainless Steel Enclosure: Environmentally Sealed Life: 30,000 to 50,000 hours Connecting wire: 105 C, AWM, 600V, CSA Body Material: Plastic, Polyamide Body Packaging: Bulk Alternates: WL-1050C1, VCC 1050A1, CML 1050C1, 272-0001, AllPoints 38-1078 Applications: Indicator lamps, also called pilot lights, are used on just about every kind of electrical or electronic equipment imaginable. Approvals: UL, CSA Made in USA Learn More

Lamps & Lights. Assembly, pushbutton. Use with PT#P9CEM4RN, GEJ-74191. Learn More

General Electric - EKZ - Lamp / Bulb, Quartz with Chromascan Scan Mounting Frame and QCX-20 Socket.

Status: Discontinued

10.8VDC 30W.

Light Type" incandescent

Complete with QCX-20 Socket/Holder.

Lumens: 400

Color Temperature: 3,100K

Bulb Dimensions: 2.0" High, 1.75" Length, 2.0" Width

Dimensions: Overall 2" Square x 4-7/8" tall.

Applications: Slide Projector Lamp & Chromascan Scan

Bulb UPC 043168993388

Used / Removed from Chromascan Scan Equipment

Made in USA

Learn More

GILWAY - 6838 - Lamps. 28V 0.024A Subminiature T1 Wire Lead

Type: Incandescent

Voltage: 28V

Current: 0.024A (24mA)

Life: 16,000-hours

0.15 MSCP

filament Type: CC-2F

Dimensions: 3.18mm D x 6.4mm with 25mm two leads.

From: manuf bx/100pcs.

NSN: 6240-00-168-0411

Learn More

Quartzline Lamp 33V 200Watt, T4 Bulb Plug-in lamp Ship wt 1oz. Projection Lamp, ANSI Code EZL, Base 2 Pin Prefocus, Airport, Rated Average Life 500 Hours, Initial Lumens 5000, Color Temperature 3100 Degrees Fahrenheit, Filament C-6 Oval, Maximum Overall Length 2 1/2 Inches, 6.6 Amps Learn More

General Electric - GE250 - Miniature Bulb 14.4V 0.12A G3.5, BA9S Auto/Instrument Rare. The General Electric GE250 miniature bulbs is a clear white light color and a voltage of 14.4V. These indoor bulbs are designed with a G3.5 glass globe shape and have an amperage of 0.12A. With a bulb wattage of 1.725W and a lifespan of over 3000 hours, these incandescent bulbs are suitable for automotive and instrumentation applications. Made in the United States in 1976, these bulbs feature a bayonet BA9S single contact connector and are crafted from brass and glass materials. GE 250 Miniature Lamp (Indicator) G3½ Bulb 7/16” Diameter • Description: Small 14.4 bulb commonly used for automotive indicator lights and Industrial Instrumentation. • Specifications: 14.4V, 0.12A (120mA) • Base Type: Bayonet BA9S Single Contact. • Approximately Globe: 0.45" (11.4 mm) Diameter and 0.40" (10.2mm) High. • BA9S is characterized by a 9mm diameter base with two side locking lugs and a single contact point at the bottom. • Filament Design: C-2F • Candle Power: .50 • Base Material: Brass • Shape: G3.5 Glass Globe • Finish: Clear • Light Center Length: 9/16” (0.5625”) • Max. Overall Length: 15/16” (0.9375”) • Average Rated life: 3000 Hours • Applications: Automotive and Instrument Genuine Vintage General Electric – Rare – Difficult Bulb to Find – No Counterfeits – No China – No Delays Made in USA Learn More

GENERAL ELECTRIC - 3157 - Lamps & Lights.

This GE product has a S8 shape with a plastic wedge. The maximum overall length of this bulb is 2.09 inches and bulb diameter is 1 inch. This lamp has basic applications such as Rear lights, Back up lights, Sidemarkers, Front lights, Turn Signals. The rated life of this lamp is 1200/5000 hours depending on usage of the lamp or car.

Automotive Replacement Lamps.

Long life.

Snap-in.

Clear.

Genuine General electric - New Old Stock

Note: Miniature incandescent.

Learn More

GENERAL ELECTRIC - 2057NA - Lamps & Lights.

Automotive Replacement Lamp / Bulb.

Type: Miniature Incandescent

Base Type: Pin/Plug In

Filament: C-6/C-6

Atmosphere: Gas Filled

Voltage: 12.8V. Amber

Base: BAY15d, Uneven Bayonets 15MM

Wattage: 27 W

Lumens: 302

Mean Sperical Candlepower: 24 cd

Shape: S8 Bulb.

Rated Life: 1200/5000 H

Dimensions:  Diameter 1.0", Light Denter Length 1.25", Max Overall Length 2.0"

Product Code: 44763

Note: New Old Stock but Small Number marked in Black marker on top of each bulb

Applications: Turn Signal, Rear,/Frint, Parking

Learn More

Lamps & Lights. Halogen 120V 100 watt projection lamp. Package:T-8 bayonet base. Note: Code-PH100T8/108DC. Bausch/Lomb 71-71-48. Learn More

Federal Signal Corp - LSL-120G - Litestak Module. Green Status Indicator.

Lamps & Lights. Litestak module. Green status indicator / column stackable - polycarbonate 360-degree view - 120VAC. Series A4.

Learn More

Federal Signal Corp - LSL-120B - Litestak Module. Blue Status Indicator.

Federal Signal's Litestak status indicator is a column of signal lights that indicate the status of a process or machine. 

• High performance in a small package
• Impact-resistant Fresnel lensing in 5 colors
• Increases productivity
• Large diameter
• Process control environments
• Snap open lens for quick and easy maintenance and color resequencing
• Superior 360 deg visual signaling
• User-friendly installation and maintenance
• Versatile signaling

Federal Signal Corp Incandescent Lamp, Blue, Flashing & Steady, Stackable Tower Light Module

Litestak module.

Blue status indicator / column stackable - polycarbonate 360-degree view - 24VDC.

Series A4.

24 VDC, 0.76 Amp

1 NEMA Rated

Base Mount

UL and cUL Listed, CSA Certified.

 

Learn More

Federal Signal Corp - LSL-120A - Litestak Module. Amber Status Indicator.

Federal Signal's Litestak status indicator is a column of signal lights that indicate the status of a process or machine. 

• High performance in a small package
• Impact-resistant Fresnel lensing in 5 colors
• Increases productivity
• Large diameter
• Process control environments
• Snap open lens for quick and easy maintenance and color resequencing
• Superior 360 deg visual signaling
• User-friendly installation and maintenance
• Versatile signaling

Federal Signal Corp Incandescent Lamp, Amber, Flashing & Steady, Stackable Tower Light Module

Litestak module.

Amber status indicator / column stackable - polycarbonate 360-degree view - 24VDC.

Series A4.

24 VDC, 0.76 Amp

1 NEMA Rated

Base Mount

UL and cUL Listed, CSA Certified.

 

Learn More

Federal Signal Corp - LSL-024G - Litestak Module. Green Status Indicator.

Federal Signal's Litestak status indicator is a column of signal lights that indicate the status of a process or machine. 

• High performance in a small package
• Impact-resistant Fresnel lensing in 5 colors
• Increases productivity
• Large diameter
• Process control environments
• Snap open lens for quick and easy maintenance and color resequencing
• Superior 360 deg visual signaling
• User-friendly installation and maintenance
• Versatile signaling

Federal Signal Corp Incandescent Lamp, Green, Flashing & Steady, Stackable Tower Light Module

Litestak module.

Green status indicator / column stackable - polycarbonate 360-degree view - 24VDC.

Series A3.

24 VDC, 0.76 Amp

1 NEMA Rated

Base Mount

UL and cUL Listed, CSA Certified.

Learn More

Federal Signal Corp - LSB-024-240 - Litestak Base.

Federal Signal's Litestak® Base Unit. The Litestak® status indicator is a column of signal lights that indicate the status of a process or machine. The units may include up to five Light Modules (Model LSL) available in amber, blue, clear, green and red; or four light modules plus an optional Sound Module (Models LSS or LSH) to create a dual purpose audible/visual status indicator. The Sound Module always occupies the top position of a Litestak unit. Litestak's lensing provides a 360° visual signal. Individual light modules may be set to either flash or burn steadily. Each light module consists of two impact-resistant polycarbonate lens halves that snap apart to provide easy maintenance and interchangeability of colors. Litestak units can be installed on a 3/4 pipe mount or surface mounted with the Model LSB Base. Litestak is UL and cUL Listed, and CSA Certified for indoor use. Multiple lens colors can communicate machine shutdown, shortage of materials, supervisor attention, etc. Ideal applications for the Litestak include assembly lines, instrument panels, workcells, etc.

Series B.

24 - 240 VAC/VDC

 3.8Amp, 120V 1.13Amp, 240V 0.6Amp.

To be used with 1-5 Model LSL light modules.

UPC 782979268024

UL, CSA

Made in USA

Learn More

General Electric - ALF772-02 - Lamp Holder Receptacal.

Status: Discontinued

Lamp Holder for Fluorescent Bulbs.

Medium Bi-Pin

600V 660Watt.

2 Contacts/2 Wire.

NSN: 6250-01-024-1808

 

Learn More

Lamp, neon. Data lamp cartridge. Various numbers: 0-99, or A-Z at the top. Color: amber. Mount: Bi-Pin PCB. Dimensions: 8.4mm D at it's widest area. Behind panel: 7.2mm D x 16.2mm deep. Lens: 7.2mm D x 9.8mm high. Package of 25. Learn More

ELDEMA - CG-NEON A029/NE-2E Lamp, Neon.

Clear anodized Aluminum Case

Plastic Lens Cap

Meets LIL-L-3661

Stainless Steel Pins

High Dielectric Insulation Mates with all DH Series Holders

Data Lamp Cartridge.

Color: Amber.

Mount: Bi-Pin PCB.

Dimensions: 8.4mm D at it's widest area.

Behind panel: 7.2mm D x 16.2mm deep.

Lens: 7.2mm D x 9.8mm high.CG04-ACS

Alternate: CG04-ACS

 

Learn More

Lamps & Lights. AdaptaBeacon flashing light. Red light special, flashing, commercial fixture. PLC Compatible. Weatherproof 40W halogen lamp in 120V AC model. Cast base can be utilized as a junction box. Wired to plug in. May have been a display model. On Sale/Priced to move. More info: http://www.edwards-signals.com/files/c-50.pdf Learn More

Lamps & Lights. Panel indicators. Bi pin. Luminous Intensity (MSCP):34. Viewing angle: 50. Voltage: 2.2V. Current: 20mA. Wavelength:565nm. Color: green. Rohs complaint. Learn More

Dialco Dialight - 559-0202-001 Lamps & Lights.

Color: Green, Lens Color: Green

Mount: Snap in

Current Rating: 15 mA

Forward Current: 15 mA

Forward Voltage: 5 V

Illumination Color: Green

Lens Style: Diffused, Dome

Luminous Intensity:  8 mcd

Operating Temperature: -20 to 85 °C

Viewing Angle: 60 °

Voltage Rating (DC): 5 V

Wavelength: 565 nm

Learn More