Inductors & Coils
- API DELEVAN - 1008-821KB - Inductors, ferrite core. 0.82uH.$0.69Inductors, ferrite core. 0.82uH. Tolerance: 10%. DC resistance: 0.300 Ohm max. Max 708ma. Case: SMD. More info: www.delevan.com/seriesPDFs/1008.pdf Learn More
- J.W.MILLER - 4608-RC - Inductor, choke. 3.9uH 1Amp.$1.00IN STOCK - MORE THAN 500 READY TO SHIP!Inductor, choke. Inductance: 3.9uH. Current: 1Amp. Tolerance: 10%. DC Resistance: 0.45 Ohm. Minimum quality factor: 60@7.96MHz. Core material: Phenolic. Package: axial leads. Dimensions: 0.27mm D x 20.07mm long. Operating temperature: -55 to 125 Deg C. More info: http://www.bourns.com/data/global/pdfs/4600_series.pdf Learn More
- RadioShack - 273-104 - Snap-On Ferrite Toroid RF Choke Core, Two (2) Cores in Package.IN STOCK - MORE THAN 100 READY TO SHIP!
RadioShack - 273-104 - Snap-On Ferrite Toroid RF Choke Cores, Two (2) Cores in Package.
Reduce or eliminate on RFI (radio frequency interference) with this snap-together Toroid Choke Core. Effective "Roadblock" to Radio Frequency Interference. Easily use choke core on a phone, computer, AC, audio and coax cables. No cable cutting necessary - you simply wind it through the core.
Fast 'n Easy Solutions to RFI Problems
Helps reduce RFI (Radio Frequency Interference). Use on Phone, Computer, Keyboard, AC, Audio and Coax Cables.
Use as close to the equipment as possible, wrapping the cord through the center of the coil until the core is filled. All turns must be wound in the same direction to avoid cancelling the effects of the core.
No need to cut cable - Simply wind it through the core and snap together.
Ferrite Split Core Chokes (Two per package)
Effective to 500 MHz.
Approximate Overall Dimensions: 1.62" X 1.125" X 0.396"
Opening: 0.885" X 0.380" (7/8" X 3/8")
Includes Detailed Instructions on Theory and Installation.
Note: Some customer report using as a step up Transformer by winding primary and secondary coils driven at 60 Hz.
Additional Interference Information:
http://www.audiosystemsgroup.com/RFI-Ham.pdf
http://www.ll-leasing.com/pritch/shortwav.htm
https://www.qsl.net/wa2lqo/nlnov99.html
http://www.industrial-electronics.com/measurement-testing-com/zapping_electrical_noise.html
UPC 040293126568
NSN: 5950-01-322-7847
Equivalent Part Numbers: 2730104, 273-0104, 273-104
Learn More - Vishay DALE - IHA-502 - Inductor, choke. 10uH 8.3Amp 0.015 Ohm.READY TO SHIP - ONLY 32 LEFT IN STOCK!
Vishay DALE - IHA-502 Inductor, choke.
10uH 8.3Amp 0.015 Ohm.
Tolerance: 10%.
Mount: PCB.
Package: Axial leads.
Dimensions: 0.475" (12.07mm) D x 1.05" (26.67mm) long.
Note: Filter inductors, high current.
Protected by polyolefin tubing - flame retardant UL type VW-1 per MIL-I-23053/5, Class 3 requirements.
Learn More - COILCRAFT - DO1606T-103 - Inductor, Coil. Inductance: 10uH, +/-20%.$0.89 As low as $0.49
COILCRAFT - DO1606T-103 Inductor, Coil.
Inductance: 10uH, +/-20%.
DCR: 0.30 ohms.
60MHz.
Package: SMD.
Learn More - COILCRAFT - LPO6013-103KLC - Inductor, Ferrite. 10uH 1Amp. SMD.
COILCRAFT - LPO6013-103KLC Inductor, Ferrite.
Inductance: 10uH.
Current: 1Amp.
Tolerance: 20%.
DCR: 0.30 Ohm.
Package: SMD.
Dimensions: only 1.3 mm high.
RoHS compliant.
Learn More - API DELEVAN - S4924-223K - Inductors, ferrite core/ferrite sleeve. 22uH.$0.69Inductors, ferrite core/ferrite sleeve. 22uH. DC resistance: 0.89 Ohm max. Max 561mA. Dimensions: 12.44 to 13.21mm wide x 5.84 to 6.35mm deep x 5.33 to 5.84mm high. Operating temperature range: �55 to +125 DegC. Case: SMD. Learn More
- Sumida - CDRH125-821MC - Inductor, choke. 820uH 0.43Amp.$0.68Inductor, choke. 820uH 0.43Amp. Tolerance: 20%. Resistance: 1.24 Ohm. Shielded. Package: 12mm square SMD. Learn More
- Abracon Corporation - AIUR-11-103K - Inductor, coil. 10000uH 10% T/H. Package of 5$1.75READY TO SHIP - ONLY 57 LEFT IN STOCK!
Inductor, coil. 10000uH 10% T/H. Current: 130mA. Resistance: 20.4 Ohm. Ferrite core. Unshielded. Package: radial 2 pin, cut 3/16" leads. Dimensions: 0.375" D x 0.450" H (9.53mm x 15.88mm). Lead free. RoHS compliant.. Package of 5
Learn More