Inductors & Coils
- J.W.MILLER - 70F337AP - Inductor, Choke. Coil. 0.33uH (330nH) 1.69 Amp.
J.W.MILLER - 70F337AP - Inductor, Choke. Coil.
Special Features
• High Q, high self-resonant frequency
• High voltage application
• Universal wound
• Low cost
• Varnish coated
• Operating temperature: phenolic -55 to +125°C
• Current to cause 35°C maximum temperature riseInductance: 0.33uH (330nH)
Current: 1.69 Amp. (1690 mA)
Tolerance: 20%.
DC Resistance: 700m Ohm. (0.7 ohm)
Material: Phenolic core.
Mount: Through Hole.
Package: RF Varnished, Axial Leads.
More info: http://www.bourns.com/data/global/pdfs/70f_series.pdf
Learn More - J.W.MILLER - 4608-RC - Inductor, choke. 3.9uH 1Amp.$1.00IN STOCK - MORE THAN 500 READY TO SHIP!Inductor, choke. Inductance: 3.9uH. Current: 1Amp. Tolerance: 10%. DC Resistance: 0.45 Ohm. Minimum quality factor: 60@7.96MHz. Core material: Phenolic. Package: axial leads. Dimensions: 0.27mm D x 20.07mm long. Operating temperature: -55 to 125 Deg C. More info: http://www.bourns.com/data/global/pdfs/4600_series.pdf Learn More
- Vishay - DALE - IHD3-10 - Inductor, Coil. 10uuH, 4 Amp, Axial leads.IN STOCK - MORE THAN 1,000 READY TO SHIP!
Vishay - DALE - IHD3-10 Inductor, Coil, 10uH.
Status : Discontinued
Inductor Type: High Frequency
Series: IHD
Inductance:10µH
Temperature: -55 C to 125 C
Package/Case: Axial Leaded
Core Material: Ferrite
Maximum Current: 4A.
Tolerance: 15%.
DC Resistance: 0.016 Ohm max.
Dimensions: 0.900"L x 0.460"D (22.86 X 11.68 mm) plus axial leads 1.3"L.
Learn More - API DELEVAN - 4590-153K - Inductors, ferrite core. 15uH.$0.69Inductors, ferrite core. 15uH. Tolerance: 10%. DC resistance: 0.020 Ohm max. Max 5.76 Amp. Dimensions:11.55mm D x 22.86mm long.Operating temperature range: �55 to +125 Deg C. Up to only 85 Deg C at full rated current. Case: axial. More info: ww.delevan.com/web/partfinder.php?PartNumber=4590 Learn More
- API DELEVAN - S4924-223K - Inductors, ferrite core/ferrite sleeve. 22uH.$0.69Inductors, ferrite core/ferrite sleeve. 22uH. DC resistance: 0.89 Ohm max. Max 561mA. Dimensions: 12.44 to 13.21mm wide x 5.84 to 6.35mm deep x 5.33 to 5.84mm high. Operating temperature range: �55 to +125 DegC. Case: SMD. Learn More
- Vishay DALE - IHA-205 - Inductor, choke. 500uH 2.3Amp 0.32 Ohm.READY TO SHIP - ONLY 57 LEFT IN STOCK!
Vishay DALE - IHA-205 Inductor Choke, Ferrite Core Wirewound.
500uH 2.3Amp 0.32 Ohm.
Tolerance: 10%. Mount: PCB.
Package: Axial Leads.
Dimensions: 0.750" (19.05mm) D x 1.05" (26.67mm) long.
Filter inductors, high current used for Noise filtering for switching regulators, power amplifiers, power supplies, and SCR and triac control circuits.
Protected by polyolefin tubing - flame retardant UL type VW-1 per MIL-I-23053/5, Class 3 requirements.
NSN 5950-01-191-9998
Learn More - VISHAY DALE - IHB5-560 - Filter Inductor, High Current, Radial Leaded, Coil 560uH, 5 Amp, 0.105 Ohm.IN STOCK - MORE THAN 100 READY TO SHIP!
VISHAY DALE - IHB5-560 - Filter Inductor, High Current, Radial Leaded, Coil
Toroid inductance coils are important electrical components for preventing electromagnetic interference, widely used in supply circuits, miniature TVs, adapters, DC-DC power modules, various electronic products, etc. The advantage of the toroidal shape is that, due to its symmetry, the amount of magnetic flux that escapes outside the core (Leakage Flux) is low, therefore it is more efficient and thus radiates less Electromagnet Interference (EMI).
Large Low Loss, Ferrite Core with stable electrical operating characteristics maximize inductor efficiency by minimizing copper lossesHigh-Reliability Low-Resistance Leaded Inductor.Toroid Cores are Self Shielded requiring no need for an enclosure.560uH 5 Amp, 0.105 Ohm.
DCR Max. (Ohms): 0.105
Rated DC Current (Amps): 5
Lead E Spacing: 1.07 (28.18)
Max. Lead "F" Diameter: 0.045 (1/15)
Tolerance: 10%.
Mount: PCB, Open Frame.
Core Material: Ferrite
Operating Temperature: -55°C to 125°CDimensions: 1.60" (Diameter) x 1.45" Coil Height) x 0.175" (core Diameter).
Additional Information: https://www.vishay.com/docs/34015/ihb.pdf
Applications: Applications: EMI Filters, Buck and Boost Switches, Ballasts, Medical, Telecommunications, Musical Instruments, Industrial Controls, Chokes, Power Supplies, Inverters, Amplifiers and Control Circuits.Made in USA – Factory New - COILCRAFT - 1008CS-562XJBC - Inductor, RF. 5600nH 240mA. Package of 10.
COILCRAFT - 1008CS-562XJBC Inductor, RF. General Purpose SMD
Status: Discontinued
Indusctance: 5600nH at 7.9MHz, 240mA.
Tolerance: 5%.
Q min: 16 @ 7.9 MHz
SRF min: 20 MHz
DCR: 4.0 Ohm.
Irms: 240mA
Technology: Wirewound.
Package: SMD, ceramic chip. Black.
Package of 10.
Alternate: COILCRAFT's RoHS Compliant replacment P/N is 1008CS-562XJLC
Learn More - Unidentified MFG - 240-2035-000 - Inductor, coil. 10mH.$1.00Inductor, coil. Inductance: 10mH. Current 130mA. Tolerance: 0.01%. DC Resistance: 3.7 Ohm. Case: axial leads. New. Dimensions: 0.085 to 0.105" D x 0.240 to 0.260" max. Note: Radio frequency. Military NSN 5950-01-155-6236. Operating temperature: 105 Deg C. Learn More