Inductors & Coils
- J.W.MILLER - 70F337AP - Inductor, Choke. Coil. 0.33uH (330nH) 1.69 Amp.
J.W.MILLER - 70F337AP - Inductor, Choke. Coil.
Special Features
• High Q, high self-resonant frequency
• High voltage application
• Universal wound
• Low cost
• Varnish coated
• Operating temperature: phenolic -55 to +125°C
• Current to cause 35°C maximum temperature riseInductance: 0.33uH (330nH)
Current: 1.69 Amp. (1690 mA)
Tolerance: 20%.
DC Resistance: 700m Ohm. (0.7 ohm)
Material: Phenolic core.
Mount: Through Hole.
Package: RF Varnished, Axial Leads.
More info: http://www.bourns.com/data/global/pdfs/70f_series.pdf
Learn More - J.W.MILLER - 4608-RC - Inductor, choke. 3.9uH 1Amp.$1.00IN STOCK - MORE THAN 500 READY TO SHIP!Inductor, choke. Inductance: 3.9uH. Current: 1Amp. Tolerance: 10%. DC Resistance: 0.45 Ohm. Minimum quality factor: 60@7.96MHz. Core material: Phenolic. Package: axial leads. Dimensions: 0.27mm D x 20.07mm long. Operating temperature: -55 to 125 Deg C. More info: http://www.bourns.com/data/global/pdfs/4600_series.pdf Learn More
- DALE - IH10-05 - 5uH 10Amp Axial Inductor / Coil$1.00IN STOCK - MORE THAN 100 READY TO SHIP!
DALE - IH10-05 5uH 10Amp 10% Inductors/Coils.
Noise filtering for switching regulators, power amplifiers, power supplies and SCR and TRIAC Control circuits.
DCR = 0.01-OHM
SRF = 30Mhz
1.125" x 0.687" x 0.812" (80 per manuf bx NEW @ $1.00 each piece/$80.00)
Additional Information: https://www.vishay.com/docs/34013/ih.pdf
Learn More - Vishay / Dale Electronics - IM-2-5.6uH 10% B08 - Inductor. 5.6uH 10% Package of 10.$4.99Inductor, high frequency. 5.6uH +/-10%. Series: IM-2. DC resistance: 1.8M Ohm max. DC current: 185mA. Self-resonant freq: 65MHz. Q-Factor: 50. Package: axial lead. Package of 10. Learn More
- RENCO - RL1256-3-18 - Power Line Inductor, Choke. 18uH 0.010 Ohm 13.5Amp.
RENCO - RL1256-3-18 - Power Line Inductor, Choke.
Ratings: 18uH 0.010 Ohm 13.5Amp.
High saturation flux density material is ideal for use in switching regulated power supply applications.
Ideal wherever high current choke values in a small physical size are needed
DC Saturated Amps: 29Amp.
Operating temperature range: -40°C to +130°C
Dimensions: diameter 1.10" x Height 0.85" (27.94mm x 21.59mm)
Typical applications include: power amplifiers, power supplies, SCR and TRIAC controls, speaker crossover networks and filters.
- API DELEVAN - S4924-223K - Inductors, ferrite core/ferrite sleeve. 22uH.$0.69Inductors, ferrite core/ferrite sleeve. 22uH. DC resistance: 0.89 Ohm max. Max 561mA. Dimensions: 12.44 to 13.21mm wide x 5.84 to 6.35mm deep x 5.33 to 5.84mm high. Operating temperature range: �55 to +125 DegC. Case: SMD. Learn More
- COOPER - CTX100-4 - Inductor, Coil. 99.2uH 0.92Amp, 0.302 Ohm.
COOPER - CTX100-4 - Inductor, Coil.
99.23uH 0.92Amp, 0.302 Ohm.
Tolerance: 20%.
Powdered Iron.
Package: SMD.
Dimensions: 13.97mm wide x 13.97mm long x 6.35mm High.
Note: Cooper Electronic Technologies.
Learn More - PANASONIC - ELL6SH181M - Inductor, coil. 180uH. SMD.$0.65Inductor, coil. Inductance: 180uH. Current: 300mA. Tolerance: 20%. DC Resistance: 1.2 Ohm. Dissipation: 1 watt. Operating temperature: 105 Deg C. Dimensions: Thin, height 2.5mm, 2.8mm max. Package: SMD. From: Manufactures new T/R. Application: Video, audio, mobile communications, electric battery driven equipment. As a decoupling choke coil in DC/DC converters (S.M.P.S.). Note: Magnetic shield type, series H. Learn More
- SIGNAL TRANSFORMER INC - CL-25-50 - CL-25-50 Power Choke$35.00Out of stockInductor. choke. (Series connected) 1.2MHY 25Amp 0.012-Ohm) (parrallel connected) 0.3MHY 50Amp 0.003-Ohm) Learn More