Inductors & Coils

Inductor. Type 103A-5. Tuning range: 3.5 - 10Mc. L=5uH. C= 6uF. Q=200 approximately. Housing: metal can 3" D x 3" high. Manufactures date 1970. Used, very good condition. Learn More

Inductor, high frequency. 5.6uH +/-10%. Series: IM-2. DC resistance: 1.8M Ohm max. DC current: 185mA. Self-resonant freq: 65MHz. Q-Factor: 50. Package: axial lead. Package of 10. Learn More

Bourns - J.W.MILLER - VLS-5R6 Inductor, coil.

Variable RF 5.6uH.

Mount: PCB radial leads.

Dimensions: 8.0mm D x 10.8mm high.

Learn More

Inductors, iron core. 5.6uH, 195mA. Tolerance: 10%. Dimensions: 0.095� D x 0.25� long. Operating temperature range: �55 to +125 Deg C. Case: axial leads. Learn More

Inductors, coils. 6.8uhy. Package: axial leads. Package of 5. Learn More

TOKO AMERICA - A993AS-6R8M

6.8uH 20% 0.11-Ohm SMD

Fixed Inductors DB320C Series,

3.8mm footprint

Manuf in China/manuf pkg'd.

Learn More

Inductor, ferrite. Inductance: 6.8uH. Tolerance: 20%. DC Resistance: 1.5 Ohm. Current: 0.24Amp. Package: 1212 SMD. T/R. Note: Operating temperature: 85 Deg C. Package of 4. Learn More

0.075-OHM DC RES 7.0 UH wound with about 25 turns - twice0.45" dia x 0.7" long, two 1.3" leads - axial - relatively heavy current NEW Learn More

Inductor, coil. 8.0uH. Mount: PCB. Dimensions: 19.0mm D max x 28.3mm high. Lead spacing: 15.8mm. Learn More

RadioShack - 273-104 - Snap-On Ferrite Toroid RF Choke Cores, Two (2) Cores in Package.

Reduce or eliminate on RFI (radio frequency interference) with this snap-together Toroid Choke Core. Effective "Roadblock" to Radio Frequency Interference. Easily use choke core on a phone, computer, AC, audio and coax cables. No cable cutting necessary - you simply wind it through the core.

Fast 'n Easy Solutions to RFI Problems

Helps reduce RFI (Radio Frequency Interference). Use on Phone, Computer, Keyboard, AC, Audio and Coax Cables.

Use as close to the equipment as possible, wrapping the cord through the center of the coil until the core is filled. All turns must be wound in the same direction to avoid cancelling the effects of the core.

No need to cut cable - Simply wind it through the core and snap together.

Ferrite Split Core Chokes (Two per package)

Effective to 500 MHz.

Approximate Overall Dimensions: 1.62" X  1.125" X 0.396"

Opening: 0.885" X 0.380" (7/8" X 3/8")

Includes Detailed Instructions on Theory and Installation.

Note: Some customer report using as a step up Transformer by winding primary and secondary coils driven at 60 Hz. 

Additional Interference Information: 

http://www.audiosystemsgroup.com/RFI-Ham.pdf

http://www.ll-leasing.com/pritch/shortwav.htm

https://www.qsl.net/wa2lqo/nlnov99.html

http://www.industrial-electronics.com/measurement-testing-com/zapping_electrical_noise.html

UPC 040293126568

NSN: 5950-01-322-7847

Equivalent Part Numbers: 2730104, 273-0104, 273-104

Learn More

Inductor. 10uH. Tolerance: 20%. Package: SMD. Learn More

Inductor, ckoke. Inductance: 10uH. Current: 140mA. Tolerance: 5%. DCR: 2.1 Ohm. Material: ferrite. Package: 1210 SMD. Package of 25. Learn More

Bourns - J.W.MILLER - 50A826EBI Inductor.

4.4 - 10.2uH Adjustable Encapsulated.

[email protected].

Mount: Panel.

Dimensions: 0.437" D x 1" long.

Genuine Vintage  J.W. Miller - New Old Stock - Rare

Complete with manufactures specification sheet.

Learn More

HENG HO ELECTRONICS LTD - R73273 HEN-0001 EMI/RFI Chokes/Inductors.

An inductor used to block higher-frequency while passing direct current (DC) and lower-frequencies of alternating current (AC) in an electrical circuit. The choke's impedance increases with frequency. Its low electrical resistance passes both AC and DC with little power loss, but its reactance limits the amount of AC passed.

Encapsulated 10uH 0.5Amp Radial Leads.

Overall 10.7mm wide x 12.7mm tall x 7mm deep, with 6.8mm lead spacing.

Manufufacture Label HEN-001.

Made in Taiwan

Learn More

Vishay - DALE - IHD3-10 Inductor, Coil, 10uH.

Status : Discontinued

Inductor Type: High Frequency

Series: IHD

Inductance:10µH

Temperature: -55 C to 125 C

Package/Case: Axial Leaded

Core Material: Ferrite 

Maximum Current: 4A.

Tolerance: 15%.

DC Resistance: 0.016 Ohm max.

Dimensions: 0.900"L x 0.460"D (22.86 X 11.68 mm) plus axial leads 1.3"L.

Learn More

Vishay DALE - IHA-502 Inductor, choke.

10uH 8.3Amp 0.015 Ohm.

Tolerance: 10%.

Mount: PCB.

Package: Axial leads.

Dimensions: 0.475" (12.07mm) D x 1.05" (26.67mm) long.

Note: Filter inductors, high current.

Protected by polyolefin tubing - flame retardant UL type VW-1 per MIL-I-23053/5, Class 3 requirements.

Learn More

COILCRAFT - DO1606T-103 Inductor, Coil.

Inductance: 10uH, +/-20%.

DCR: 0.30 ohms.

60MHz.

Package: SMD.

Learn More

COILCRAFT - LPO6013-103KLC Inductor, Ferrite.

Inductance: 10uH.

Current: 1Amp.

Tolerance: 20%.

DCR: 0.30 Ohm.

Package: SMD.

Dimensions: only 1.3 mm high.

RoHS compliant.

Learn More

Inductor, choke. 10uH 2Amp 0.085 Ohm. Package: 3mm high, SMD. Learn More

Inductor. Type 103A-11. Tuning range: 2.5 - 7Mc. L=10uH. C= 6uF. Q=200 approximately. Housing: metal can 3" D x 3" high. Manufactures date 1970. Used, very good condition. Learn More

Inductor, Coil. 12uH.

Ferrit Core, Adjustable.

Mount: PCB.

Base is 12.6mm Square, Overall 24.9mm above board.

 

Learn More

Inductor, choke. 12uH 404mA 1.1 Ohm. Q @ Freq: 65 @ 2.5MHz. Tolerance: 10%. Unshielded. Core material: ferrite. Package: axial leads, color coded. More info: http://www.bourns.com/data/global/pdfs/9310_series.pdf Learn More

Eaton Coiltronics Cooper - VP1-0190-R Inductor, Transformer.

Inductance: 12.2uH., 0.145 Ohm

Current: ISAT 0.43 Amp, IRMS 0.85 Amp.

Tolerance: 20%.

Operating temperaure: -40 to 85 Deg C.

Package: VP SZ 1, SMD low profile.

From: Manufactures T/R.

Note: Cooper Electronic Technologies/Coiltronics.

Learn More

Inductors, iron core. 12uH, 195mA. Tolerance: 10%. Dimensions: 0.095� D x 0.25� long. Operating temperature range: �55 to +125 Deg C. Case: axial leads. Learn More