Optical Devices

Philips - NXA1031/01,

IC, optical.

Area CCD Image Array - Frame Xfer, EIA TV Std. Vertical pixel count = 490.

Horizontal pixel count = 610. Vertical pixel dimension (m) = 18.6u.

Horizontal pixel dimension (m) = 9.9u. Horizontal dimension (m) = 6.0m.

Vertical dimension (m) = 4.5m, Vsup nom.(V) supply voltage = 20,

150mW. Case: 24 Cdip gold leads.

DIP24CG

Learn More

IC. CCD SENSOR CCIR TV STANDARD. 576V x 604H Pixel count Area CCD Image Array - Frame Transfer Sensor CCIR Std Vertical Pixel Dimension (m) = 15.6u. Horizontal Pixel Dimension (m) = 10u. Horizontal Dimension (m) = 6.0mm. Vertical Dimension (m) = 4.5m. 20V, 150mW. Package: 24 Cdip, gold leads. Learn More

Fiber Optic Bundle. As used in the Chromascan. Dimensions: 60" long, 0.43 diameter. At 52" it branches out into the center and outside fibers. Overall bundle area is 0.25" diameter. Each end is polished and clad in stainless steel tip. Learn More

Unidentified MFG - 9-112 Back At-ya Mirror - First Surface Mirror.

A first-surface mirror or front-surface mirror (also commonly abbreviated FS mirror or FSM) is a mirror with the reflective surface being above a backing, as opposed to the conventional, second-surface mirror with the reflective surface behind a transparent substrate such as glass or acrylic. Afirst surface mirror typically reflects 94 to 99%.

3-Sided for Lasers.

Reflects laser light back at emitter.

3 Mirrors Mounted on a Funnel Shaped Mount.

Dimensions: 73mm wide x 56mm tall.

Three threaded mounting holes on bottom, 2" centers.

Minor scratches on mirrors from storage in paper.

Applications: First Surface mirrors are primarily used for projecting clear sharp images in applications such as: Flight Simulation, Reflecting Telescopes, Kaleidoscopes, Periscopes, Laser, and Medical imaging.

Learn More

IC, optical. Area CCD Image Array - Frame Xfer, EIA TV Std. Vertical pixel count = 490. Horizontal pixel count = 610. Vertical pixel dimension (m) = 18.6u. Horizontal pixel dimension (m) = 9.9u. Horizontal dimension (m) = 6.0m. Vertical dimension (m) = 4.5m, Vsup nom.(V) supply voltage = 20, 150mW. Case: 24 Cdip gold leads. Learn More

Clear Lucite - Light Diffuser.

Overall Dimensions 1.4"OD x 1.94"High.

Coarse Threaded Outer Diameter measures 1.250" Inner  Thread Diameter 1.17"

Threaded at bottom with large hole inside 1.5" Deep Rounded by 0.47" I.D.

Made in Taiwan

Package of 2

Learn More

Plus 50 Lens, extension.

Optical diffuser.

For X-band radar (antenna) detector.

Dimensions: 2.45" D x 0.68", plus 2 0.33" mounting tabs.

Learn More

DOLAN-JENNER INDUSTRIES - B612 - 002112003012 - Fiber Optic Straight Through Cable for Microscope, 12" New. Dolan-Jenner is a top manufacturer of Fiber Optic Illuminators and lighting solutions. • Fiber Bundle Diameter: 0.062" (1.59 mm) • End Ferrule Diameter: 0.187" (4.75 mm) • End Ferrule Shoulder Diameter: 0.205" (5.21 mm) • Bundle Sheathing Diameter: 0.190" (4.83 mm) • Temperature Rating: -40° F to 225° F, (-40° C to 107° C) • Total Overall Length: 12" (304.8 mm) • Sheathing Material: PVC Monocoil • Light Source Adapter 1.0" (25mm) "A" Input: SX-5 Adapter • Light Source Adapter 0.59" (15mm) "B" Input: SX-5B Adapter New Old Stock Learn More

Optical power meter with 40X, 105, 107.

Learn More

Optical Waveform Analyzer. Range 1 / 10 / 100 / 1,000mV out per uW in - 0-0.5V measurement Output. Like new with carrying case and battery eliminator and Male/male BNC adaptor. S/N: 14233no manual.

Learn More

NAMCO CONTROLS - RK93/2-501 - Infrared Scanner

2.5" - range modulated beam.

Supply: 24VDC.

PNP Output.

New, complete but without housing over PC board.

May also be listed as PK93/4-60(S).

Learn More

Reflector. 2.87" x 2.93" x 0.65"OD. Clear plastic to diffuse light or reflect incoming visible and infrared. ID: 2.7" x 2.8". Learn More

Photoelectric scanner, with shielded cable. Heatsinked type. Dimensions: 1.750" wide x 1.253" deep x 0.379" high. No other information available. Learn More

Optoelectronics. LED graph mod 128 x 64 COG YLW Led. Family: Display Modules - LCD, OLED, Graphic. Series: F-51320. Display Type: LCD - Monochrome. Display Mode: Transflective. Viewing Area: 66.80mm L x 35.50mm W. Backlight: LED - Yellow/Green. Dot Size: 0.48mm W x 0.48mm H. Dot Pitch: 0.50mm x 0.50mm. Dot Pixels: 128 x 64. Interface: Parallel. Learn More

Honeywell/Microswitch - CRS301 - Color Recognition System.

Designed for the industrial environment, not just the laboratory bench. Accurately memorizes up to eight different colors for recognition on-line. Sensitive across the entire visible light spectrum 400 to 800 nanometers to characterize colors, not just red, blue & green. Internal light source. Current sink/source output provided for each channel.

400-800nM, 8-Channels.

Color Recognition Sensor with MS-Connector Cable

4 armoured 32" Fiber Optic cables: CRS-FO-25-3 (bifurcated CRS-FO-55-TSR-3, CRS-FO-55-TSE-3, and CRS-FO-55-3 (bifurcated).

3.5" Disk CRS 301-CFG-SFT V2.10 Software.

S/N 00058

New Old Stock - Made in USA - 9042

Learn More

EG&G GAMMA SCIENTIFIC - GS-4100 - Intelligent Radiometer / Controller A test set whose primary function is to measure the optical power level available from a light emitting source, such as light emitting diode, laser diode. This test set will also measure the optical power levels at the receiver end of an optical fiber. INTELLIGENT RADIOMETER SETUP FOR DETECTOR A & 1 SCANNING DRIVE W/ 2 RS-232C Shipping Weight: Approximately 40 lbs Made in USA Learn More

AutoCollimator 44.5mm-OD 9" long, 25mm-ID. Has a 4" screw-on extension (No optics), a light source bulb and cable (No power supply) in a neat wood box with leather straps. Beautifully made by BRUNSON INSTRUMENT Co in KC, MO, USA 12-pounds

Learn More

Rechargeable DIGAPHOT with a Helipot-type counting turns dial and Big White dome for capturing and measuring those elusive LUX's. In it's own black box with deteoriating green foam, attached with a note: "Dial reading does not advance properly. Do Not Use - broken" but You may have a use for it at only $25.00 with or without black box with deteoriating green foam. Learn More

Filter, glass. Infrared cut-off / optical. Glass filter. Type: KG-3. Dimensions: 1" (25.4mm) D x 0.118" (3.0mm) thick. Light blue tint. Note: Manufacture / Twardy Technology Inc. Made in the USA. Learn More

Texas Instruments - TC103 -  Page Scanner Printed Circuit Board.

PCB Contains a TC103 IC and other Chips.

Charge Coupled Device Page Scanner PCB.

TC103 = 2048 X 1 CCD Linear Image Sensor.

Size: 12.7 UM Square.

Sensitivity: 3.5V/uJ/cm(2). N

No other information on the IBM compatible page scanners.

Complete with (2) ribbon cables/connectors, matching lens with Bellows Assembly.

IT Assembly Board 300683 Rev.

Alternates: RL2048, CCD142, CCD143

Learn More

Fiber optic transceiver. Single mode 155 MBd ATM 1x9 transceiver, 1.5 watt 6V.Class 1 laser product complies with 21 CFR 1040.10 and 1040.11 Double marked: SM-ATM155. Specification sheets included. Learn More

Fiber optic transceiver. Single mode 155 MBd ATM 1x9 transceiver, 1.5 watt 6V.Class 1 laser product complies with 21 CFR 1040.10 and 1040.11 Double marked: V23806-A84-C2. Specification sheets included. Learn More

Optical devices. Glass filter, melt 383287. Dimensions: 20.32 x 11.18mm x 2.0mm. Color: clear. Learn More

Optical devices. Glass filter, melt S30335. Dimensions: 15.24 x 11.18mm x 2.0mm. Color: Auua green. Learn More