DC Power Supply

Regulated AC to DC power supply module 10VDC 120MA out. 5-pin pcb mt Learn More

Large, Brute Force open frame supply made for IBM. In:115/208/230VAC 60HzNo regulation circuitry, awaiting yours. Or vary output by varying input voltage w/ variac. With schematic. Learn More

Two NJE RSE24-OVP-D2 power supplies, inside a nice new rack mount with meters & screwdriver adj lockable controls, for the price of one. Two 0 - 24VDC @ 0-6Amps Metered Rack mount - heavy, new in box. Learn More

Power Supply. Out: 7.5VDC 100Amp. Spanish version. Input: 104-240VAC 50/60hz. Learn More

Power supply, metered. 0-20 VDC regulated (both current & voltage adj). Learn More

Power Supply, DC. Voltage: 5VDC. Current: 12Amp. Linear, regulated. Remote programming. (Voltage adjustable +/-5%, via resistance 200-ohms/V or V/V 0.15% regulation. Dimensions: approximately 9" x 5" x 3". Open frame. Weight 7.5 lbs. Learn More

5VDC @ 31A. POWER SUPPLY

Learn More

New Rack-mounted 5VDC Metered Power supply, Amp And Volt Meters, front panel lockable screwdriver voltage adjust (+/-5%) Remote Programming, etc Input:105-132V 55/65Hz Unused, in box Learn More

LAMBDA - LT802 - Power Supply, DC. 0-18VDC

Input: 187-242VAC18A-rms, 1985 Watts.

Digital Meter Readout - Constant Voltage or Constant Current, Automatic CrossOver.

0-18VDC 5%-100% of 70Amps 40C - 52Amps at 60degC 40A 71C-ambient.

Line & Load Regulation: 0.02% + 2mV. Remote Voltage or Resistance Programming.

Remote sensing.

Fan-cooled.

Thermal Protection Ocerload Protection, Overvoltage Protection, Inrush Current Limiting.

Half the size, one third the weight of equivalent SCR-series supplies, only 30-pounds.

LT-800 Series Net Weight 30 lbs, Shipping Weight 37 lbs

Dimensions 5 3/16 X 8 3/8 X 19 3/16

Soft-start circuit.

New Factory Cost was over $2,100

Proudly Made in USA

New Old Stock

Learn More

28 VDC 9.5 AMPS power supply with a + and - sense for connecting to the corresponding + and - voltages. Learn More

POWER SUPPLY 0-10V MAX RATING 5 AMPS REGULATED Learn More

Power supply, Laboratory, programmable for automatic testing systems. 0-55VDC 0-20Amp. V&I. Adj. Digital meter. Sold as is. Corrected shipping charges will be required when ordered. Over-voltage Crowbar protection 120/240VAC input, (1000 watt). Learn More

KEPCO - PRM12-5 (-50) - Power Supply, DC.

These units are modular ferroresonant MIL-STD-461-compliant voltage stabilizers which obtain their source-isolated, overload-protected output from Kepco's proprietary transformer, Flux-O-Tran. This design lends itself to custom volt-ampere combinations, consult factory. The low cost, highly dependable ferroresonant stabilizing technique provides extraordinary isolation from a wide variety of source noise. The d-c output is inherently short-circuit proof and cannot expose delicate loads to over-voltage hazards.

12VDC 5Amp, 60Watt Size-D

• Modular ferroresonant voltage stabilizers
• High efficiency 65-75%.
• No overvoltage risk.
• Current limited.

PRM 60 Series

Input: 115VAC.

New in Manufacters Packaging with Instruction Manual

Note: Kepco Price $1079.

More info: http://www.kepcopower.com/prmmod.htm

Learn More

Bipolar Operational Power Supply - Amplifier 0- +/-1,000VDC @ 0- +/- 40mA Metered - Rack Mount - handles on front (tube model) (probably needs repair & are sold AS IS because we don't know how to test it) Learn More

about 8.1" x 5.1" x 2.15" with Voltage, OverVoltage and OverCurrent adj trimpots.Wired for 115VAC 2.4A input but will accept 230V if you truly so desire.#4 packed each..... Learn More

0- 36VDC 1.5A. BIPLOR POWER SUPPLY Learn More

Power Supply. 0-15VDC 0-6Amp. Quarter rack (100 watt). Dual meters. Dimensions: 19" long x 4" wide x 5.25" high. Learn More

0-60V 0-10A 200W SYSTEM POWER SUPPLY HPIB (option 001) UnMetered Learn More

Hewlett Packard - 6453A - 0-15VDC 200Amp Lab Power Supply Maximum Output Voltage: 15.00 VDC Maximum Output Current: 200.0 Amps Maximum Output Power: 3.00 kW Up to 75% efficiency at full output Regulation: 0.2% Regulation Modes: Constant Current, Constant Voltage Pamel Meters: Analog Internal Overvoltage Protection Power Requirements: 208 VAC 60 Hz 3 Phase Dimensions: 19” Width x 23” Depth X 14” Height 200Amp 0-15VDC @ 0-200Amps CC/CV VOLTAGE & CURRENT Adjustable & Metered 3-Phase 4-Wire input 19" Rack Mount Weighs 250 lbs Before Packing Learn More

0-60V 0-10A 200W SYSTEM POWER SUPPLY HPIB (option 001) Meterless Learn More

5V@35Amp 15V@12Amp LINEAR Learn More

Single Output - AutoRanging 0 to 60 Volt, 10 Amp, System Power Supply for HP-IB system power supply applications. Autoranging output: 0 to 60 Volts, 0 to 10 A 200 Watts-max, Combines FET switching technology with an internal microprocessor-based HP-IB programmer. Learn More

0-64VDC 0-50AMP CV/CC VOLTAGE & CURRENT Adjustable (Coarse & Fine pots) Two Analog Meters 208V-3 Phase 4-wire input - Very Good Condition (and Heavy) Learn More

Power supply. 0-40VDC @ 0-30AMPS. Two meters, 230V-Input These are a little dirty & scratched but will be tested before sale. The Agilent 6268B series of onstant-voltage / constant-current power supplies achieve high efficiency, excellent regulation.

Learn More