DC to DC Converter

DC/DC Converter. Single output 9V 25 watt. Input: 24VDC. Module 7 pin, chrome housing. Dimensions: 2" x 2". Learn More

ERICSSON - PKG4410P - DC/DC  Convertor

The PKG units can be used as on-board distributed power modules, or serve as building blocks for more centralized power boards. The high efficiency makes it possible to operate over a wide temperature range without any extra heatsinks. At forced convection cooling >200 lfm (1 m/s), the PKG units can deliver full power without heatsinks up to +65°C ambient. With derated output power it can also operate in temperature controlled environments with non-forced convection cooling. By adding external heatsinking, the temperature range can be extended even further. Thanks to its peak power capability, the PKG series is ideal for applications where max power is only required during short durations e.g. in disc drives. The PKG series uses ceramic substrates with plated copper in order to achieve good thermal management, low voltage drops, and a high efficiency.

Input Voltage: 38-72VDC

Output Voltage: 3.3VDC @ 13.6Amps

45W Output.

Efficiency typ 86% (5 V) at full load

1500 V dc isolation voltage

Terminal Type: PCB

MTBF >200 years at +75 °C casetemperature

Rugged mechanical design andefficient thermal management, max+100 °C case temperature

EMI measured according toEN 55 022 and FCC part 15J

Dimensions: Size 74.7x63.5x11.0 mm (2.94x2.50x0.433 in.

Made in Sweden

Learn More

D/C Converter Factory New parts, each in anti-static foam. Learn More

DC/DC Converter. Input: 12VDC (10.8VDC - 13.2VDC). Input current: 20mA no load, 100mA full load. Regulated, without input filter. Output: 5VDC 100mA. Case: 12 Dip in a 24 Dip outline. Case material: non-conductive black plastic. New. Learn More

True RMS-TO-DC converter 14-dip module new gold leads Learn More

DC/DC Converter. Single output. Output: 1.8V 4Amp. 7.2 watt. Input: 36-75V. Case: 2.00" L x 1.06" W x 0.50" H (50.8mm x 26.9mm x 12.7mm). 20 Pin. Learn More

15VDC @ 1A OUTPUT 20-72VDC-Input 2"Square x 0.4"high 7-pin UL&TUV-certified Learn More

5VDC In - 5VDC Out 5W 2" x 1" x 0.4" plus 4-pins UL-approved NEWManuf in Mexico Learn More

DC/DC 5V TO -9V 200MA REGULATED Learn More

48VDC to 3.3VDC at 50Amps "Half-Brick". Isolated, No heatsink, required for heavy current output. Learn More

Chopper 6-pin RFE/UsedUSA Learn More

DC/DC Converter. Lanpac. Package: 1.25" square module, 5 pin. New. Learn More

Voltage regulator. Neg 5.2V 1.5Amp. Negative input/Negative output integrated switching regulator. Mount: PCB, horizontal. Package: 3 Pin with a two pin mount tab opposite side. Note: DC/DC Converter. Learn More

DC/DC converter. Output: 2VDC (Adjustable with Trim resistor) 20Amp. Input: 36-60VDC. Dimensions: 60 x 116 x 11mm high with terminals. Un-Enclosed. Learn More

IN: 36-72VDC Output 12VDC +/-5% 0 - 1200mA 3Watts - (Adjustable with TRM terminal) DC/DC Converter - Output current limiting, automatic recovery - Only 20 x 28mm, 7.8mm above board. SHIELDED in five dimensions. Learn More

DC/DC Converter. Out: 30A 3.3VDC. In: 3.7A 36-75VDC. Mount: PCB. Package: 7 Pin module. Dimensions: 2.24" long x 2.28" wide x 0.50" high. Note: Used/Removed from equipment. Listed UL/CSA. Learn More

TDK LAMBDA - SM3024S05 - 5VDC 30Watt OUT - 24VDC Input

65mm square x 10mm. 20-pins each side.

Made in USA

Learn More

TDK LAMBDA - SM2024D12  - DC/DC MODULE fits in special socket. 46mm square x 10.2mm

Status: Discontinued

Case/Package    SMD/SMT

Mount: Surface Mount

Efficiency: 80 %

Isolation Voltage: 700 V

Max Input Voltage: 36 V

Operating Temperature: -40 °C to 60 °C

Max Output Current: 830 mA

Max Power Dissipation; 20 W

Min Input Voltage; 18 V

Number of Outputs: 2

Voltage - Output 1: 12 V

Voltage - Output 2: -12 V

Dimensions; Height 10.16 mm, Length 46.482 mm, Width 35.56 mm

MADE IN USA 

Learn More

DC/DC Converter. 24VDC to 9VDC. Chrome housed / module. PCB. Dimensions: 1" x 2". Note: Used/Removed from equipment. Learn More

Dual output 2.5Watt Module Inverters 48V in +/-12V Outwww.alldatasheet.com Learn More

DC/DC Converter. Output: 20VDC 5 watt 250mA. Input: 9-18VDC. Package dimensions: 1" x 2" x 0.4" high. Isolated. Shielded, on all six sides. Short circuit protection. Minimum output currrent 10%. Power One. Learn More

DC/DC 5V-In 28V@25MA Out -=- CONVERTER MODULE Learn More

3.3VDC and 5VDC AT 15Amps 75Watts Max - +/-10% via TRM terminal & external resistor - 36-76VDC Input - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More

3.3V (+/-10% via TRM terminal & external resistor) 23.4Amps Output - 36-76VDC Input - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More