Process Control
Process Control Components
From heaters and encoders to pumps and valves, our electronic control products can be used with a variety of systems. Whether it’s AC or DC process control component, each of our products is efficient and reliable. We have high quality encoders, heaters, valves, and solenoids for sale. Our electronic control products will help you accurately regulate the inputs and outputs of your systems.
If the process control component you require is not in stock, you can request the part from us and we’ll let you know when we can get it to you. If you have any other questions about our products, don’t hesitate to contact us.
Shop our inventory below.
-
GUARDIAN - A420-060997-00 - 24VDC solenoid 1/2" Dia x 1" Long - Tiny !IN STOCK - MORE THAN 100 READY TO SHIP!GUARDIAN - A420-060997-00 Solenoid
24 VDC Tiny SOLENOID
0.5" DIA x 1" Long - ROUND W/ BASE MT
0.195" plunger with locking device at tip
E120-59
Addressograph Multigraph P/N E120-59 - Rare - an't find these anymore
Vinatge New Old Stock
Learn More -
RBM CONTROLS ESSEX - 70-120226-5 - 36V METAL HI CURRENT SOLENOIDSpecial Price $14.98 Regular Price $32.78READY TO SHIP - ONLY 49 LEFT IN STOCK!RBM CONTROLS/ESSEX - 70-120226-5, PS50053-5-2 High Current Starter Solenoid Relay
36VDC METAL HI CURRECT SOLENOID RELAY (SPST N.O.)
Estimating 200Amps Solenoid
Two Large Copper Contactor Terminals: 5/16-24,
Single Coil Terminal: 10/32, Case Ground.
Flat Flange mounting with two large slots 2.1" apart.
Extra heavy duty corrosion resistant steel body.
Marked 70-120226-5 RFE looks in good condition
As Removed - Used
Learn More -
PSP MFG - SD-118-L - SOLENOID 30VDC$11.9630VDC SOLENOID Heavy - 1.5"OD cylindrical - threaded plunger 0.61"OD - two "wings" for mounting (undrilled) 2-pin MS connector - Aircraft surplus - NEW Old Stock Learn More -
GUARDIAN - TP4X16-I-24D - Solenoid, Cylindrical DC. Push, 24VDC 0.35A 68.8 Ohm.READY TO SHIP - ONLY 10 LEFT IN STOCK!GUARDIAN - TP4X16-I-24D Cylinrical Solenoid, DC.
Operation: Push.
Load Force: >6 oz. (6/116 N)
Holding Force: 22 Oz
Stroke length: 1.
Duty cycle: Intermittent.
Coil: 24VDC, 0.330 Amp, 72.7 Ohm.
Coil power: 8.3 Watt
Plunger config: round with 0.062" D push pin.
Mech: 3/8-32 thrd col w/brkt.
Body dim: 0.5"D x 2.023" long, overall 3.714" including internal pin. (12.7 X 51 mm)
Weight: 0.1 lbs.
Connection: with 8", 24 AWG leads.
P/N: A420-066086-00
Learn More -
GUARDIAN - A420-062396-00 - Solenoid, AC. Coil: 115VAC 0.3A 63 Ohms.READY TO SHIP - ONLY 16 LEFT IN STOCK!GUARDIAN - A420-062396-00 Solenoid, AC.
Operation: Push.
Load force: >16 oz.
Stroke Length: 0.3.
Duty cycle: Intermittant.
Coil: 115VAC 0.3A 63 Ohms.
Plunger Config: Round w/.75" knob.
Mech: 4 8-32 holes.
Body Dimensions: 1.65"x1.45"x2.3".
Weight: 0.55 lbs.
Connection: 5" 18 ga. leads.
Learn More -
GUARDIAN - A420-060761-00 - Solenoid, DC. Coil: 170VDC 0.109A 1560 Ohms.Special Price $14.98 Regular Price $18.50READY TO SHIP - ONLY 15 LEFT IN STOCK!GUARDIAN - A420-060761-00 Solenoid, DC.
Operation: open/close.
Load force: >48 oz.
Stroke length: 1.
Duty cycle: continuous.
Coil: 170VDC 0.109A 1560 Ohms.
Plunger config: round w/slot & hole.
Mech: 2 pairs of side holes.
Body dim: 0.95"x1.2"x1.95".
Weight: 0.27 lbs.
Connection: 6" 22 ga leads.
Note: Alt P/N: E120-54.
Learn More -
Unidentified MFG - 109-1295 - Electric Actuator, SolenoidSpecial Price $6.98 Regular Price $12.95READY TO SHIP - ONLY 97 LEFT IN STOCK!Unidentified MFG - 109-1295 - Electric Actuator. Solenoid
3-wire.
Body Dimensions: 1.15" OD x 0.83" High
Overall Dimensions: 1.160" Diameter x 0.830" High, Plus Spring Actuator.
New Old Stock
Learn More -
BOEING/MCQUAY-NORRIS - 3380-079250260 - Bomb Arming B-47 Solenoid 24VDC 15amp$34.95Solenoid 24VDC "Bomb Arming B-47" 15.2AMP 2-ohm coil 3380-079250260 in original Airforce box for Boeing in Wichita Kansas 2.3"D x3.8"H mounts with four studs 2.0" spacing, about 0.4" travel 0.26"D shaft Learn More -
MAGNET SCHULTZ OF AMERICA - S-09562 - Tubular Solenoid, DC. Push, 24VDC Continuous Duty.Special Price $19.98 Regular Price $28.50MAGNET SCHULTZ OF AMERICA - S-09562 - Tubular Solenoid, DC. Push,
24VDC
Continuous Duty Cycle
Coil Resistance:105 ohm
Force: 35 ounce at 0.03 inches.
Dimensions: 1.0" OD x 2.4" long excluding 3.95" long rod.
Learn More -
MAGNET SCHULTZ OF AMERICA - S-06625 - Solenoid, DC. Voltage: 24VDC.Special Price $12.98 Regular Price $14.50MAGNET SCHULTZ OF AMERICA - S-06625 - Solenoid, DC.
Voltage: 24VDC, 5W.
Continuous Duty Cycle
Coil Resistance:15 ohm
23 ounce at 0.05 inch.
Box Frame 1.2"x1.2"x1".
Additional Information: https://magnet-schultzamerica.com
Learn More -
LUMBERG - ZVS 8-30 - Multi-port distribution system.$85.00Multi-port distribution system. Parallel wired 10 pole male receptacle 3 pole female receptacle 300V 7A. Learn More -
MAGNET SCHULTZ OF AMERICA - MSA/0022 - Solenoid, DC. 12VDC.Special Price $10.98 Regular Price $14.50Out of stockMAGNET SCHULTZ OF AMERICA - MSA/0022 Solenoid, DC.
Magnet-Schultz of America (MSA) is a leading manufacturer of specialty and custom Magnetic Latching Solenoids and Magnetic Latch Mechanisms. These energy-saving products provide a bi-stable device that requires “zero power” to remain in either the magnetically-latched or unlatched position.
12VDC.
Tubular/Cylindrical
Dimensions 0.44" D x 1.662" Long including unextended Rod 0.157" D.
Alternate: R 7X9/6172
New
Learn More -
GUARDIAN - A420-057784-00, E120-31 - Solenoid. 120VAC Int duty.Special Price $10.98 Regular Price $14.50READY TO SHIP - ONLY 19 LEFT IN STOCK!GUARDIAN - A420-057784-00 Solenoid.
Voltage: 120VAC Intermittent duty.
With 0.5 uF 400VDC capacitor.
Learn More -
Festo - MSFG-24 - Solenoid, DC. Coil 24VDC 4.5 watt. Used.$9.00Solenoid, DC. Coil 24VDC 4.5 watt. Case: 2.353" long x 0.850" wide x 1.147" high plus cable exit area 0.703". Has a 3 conductor cable, 5 ft. Note: Used/Removed from equipment. Learn More -
MAGNET SCHULTZ OF AMERICA - S-0-9564 - Solenoid, DC. Coil: 24VDC 1.6A 15 Ohms.Special Price $19.98 Regular Price $28.50MAGNET SCHULTZ OF AMERICA - S-0-9564 Solenoid, DC.
Operation: Push.
Load force: 55 oz at 0.03".
Stroke Length: 1.2.
Duty Cycle: Intermittant.
Coil: 24VDC 1.6A 15 Ohms.
Plunger Config: round with 0.1" dia pin.
Mech: 3/4-24 collar w/nut.
Body Diameter: 1"D x 4"L.
Weight: 0.36 lbs.
Connection: 5" 22 ga leads.
Learn More -
Line Electric - BR178-1 - Solenoid. Ink priming, 240V.$3.00Solenoid. Ink priming, 240V. Assembly dimensions: 2" wide x 2" deep x 2-1/2" high. Contacts: (2) 3/16" male QC terminals. Learn More -
Festo - MSFG-24 - Solenoid, DC. Coil 24VDC 4.6 watt. Used.$9.00Solenoid, DC. Coil 24VDC 4.6 watt IP65. Case: 2.353" long x 0.850" wide x 1.147" high plus cable exit area 0.477". Has 2 teflon leads, 12" long. Used/Removed from equipment. Learn More
